The Finer Things in Life

eastwest2300 · 03-02-2012, 02:00 AM

Quote:

Originally Posted by wilsonp

My favorite is actually Cote D'or 68%

frost · 03-05-2012, 09:46 PM

19 Cool Watches that Require a PhD to tell Time | Cool Material

m4a1mustang · 03-19-2012, 08:11 PM

Cigar aficionados:

Have you ever been able to recover a cigar with mold? I know plume/bloom is normal on the wrapper, however I noticed some white fuzz in spots on all three feet of the Ashton 898s in my humidor. I originally thought it was just plume based on what I saw on the wrapper, but I know (or think) it doesn't occur on the foot. These have been in my humidor since last May.

I'm a little confused since I keep the humidity at around 68-69% humidity (never above 70%) and have read that mold usually doesn't occur unless you store them at 75%+ or higher.

So the question is how sure can I be that it is mold? And if it is, is there any way to salvage?

These 898s are Lonsdales. What I did so far was clean off the wrapper and cut about 1" off each foot. They sit outside of the humidor right now before I figure if I can put them back in or not. I don't want to lose them if I don't have to.

FWIW, I checked all of my other cigars and found no evidence of mold.

frost · 03-19-2012, 09:07 PM

Quote:

Originally Posted by m4a1mustang

Cigar aficionados:

Have you ever been able to recover a cigar with mold? I know plume/bloom is normal on the wrapper, however I noticed some white fuzz in spots on all three feet of the Ashton 898s in my humidor. I originally thought it was just plume based on what I saw on the wrapper, but I know (or think) it doesn't occur on the foot. These have been in my humidor since last May.

I'm a little confused since I keep the humidity at around 68-69% humidity (never above 70%) and have read that mold usually doesn't occur unless you store them at 75%+ or higher.

So the question is how sure can I be that it is mold? And if it is, is there any way to salvage?

These 898s are Lonsdales. What I did so far was clean off the wrapper and cut about 1" off each foot. They sit outside of the humidor right now before I figure if I can put them back in or not. I don't want to lose them if I don't have to.

FWIW, I checked all of my other cigars and found no evidence of mold.

Lou would be great to chime in, since I believe he actually build himself a cigar room

I believe mold on the foot is pretty common. As long as it is white, you should be fine by lopping off a small chunk, as you did, and inspecting to make sure it didn't creep any further in (which I am sure you have already done).
Not sure why they molded at that %, but I have heard several pay they smoked them after cutting an end off the foot and never noticed any difference. Again, as long as it's white, and you don't notice anything after the portion is removed.

Edit: I also just found this:
Mold is a fungus. It appears on the surface of cigars when the relative humidity in your humidor exceeds 80%. It looks like blue/gray fuzzy patches on the surface of the wrapper and will spread by producing spores. If mold appears, you should remove the affected cigars and check for any mold on the wood of your humidor. It's important to separate the affected cigars immediately and to wipe down the interior lining of your humidor with isopropyl or denatured alcohol. This will kill mold and may leave slight stains on your humidor's interior wood

frost · 03-19-2012, 09:09 PM

A couple reasons I found for why it may have molded are proximity to the humidifier, and particular brands can be more sensitive than others.

m4a1mustang · 03-20-2012, 06:42 AM

That could be it. They were sitting on the top tray just above one of my small jars of gel. But then again my Padron 26s are on the other side just above another identical jar and they are fine.

FuszNissan · 03-20-2012, 06:56 PM

Well there are a few things to ask..

1. How old are the cigars?
2. How accurate is your hydrometer ( how did you calibrate it ) ?
3. Do you refresh your humidor often?

Here is a good read. Simple and to the point. I wouldn't smoke a cigar with bad white mold, because it could have gotten under the wrap and in the leafs.

Mold on cigars

m4a1mustang · 03-20-2012, 07:00 PM

1. I got them in May '11 so they are at least that old.

2. It's accurate. It's a Xikar digital thermometer and I tested it against my analogs and the damp salt in a bag (~75%).

3. Not really.

I am probably going to toss the suckers just to be safe.

FuszNissan · 03-20-2012, 07:17 PM

If it was just spots I would say smoke them, but being a year old and having mold, it's better to play it safe.

frost · 03-20-2012, 08:44 PM

Quote:

Originally Posted by m4a1mustang

I am probably going to toss the suckers in the mail to frost because he will smoke the **** out of them, just to be safe.

antennahead · 03-20-2012, 09:05 PM

Quote:

Originally Posted by FuszNissan

If it was just spots I would say smoke them, but being a year old and having mold, it's better to play it safe.

But I heard those are the best kind ................ give you a hell-of -a buzz

antennahead · 03-27-2012, 11:25 PM

Marshall Fridge | The coolest icon in music just got cooler.

frost · 03-27-2012, 11:28 PM

lol, that was pretty cool (pun intended)

antennahead · 03-27-2012, 11:30 PM

Quote:

Originally Posted by frost

lol, that was pretty cool (pun intended)

Every guy needs one of those in his man-cave

( Click to show/hide )

frost · 03-27-2012, 11:35 PM

buh dum tsh

03-19-2012, 08:11 PM	#1098 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Cigar aficionados: Have you ever been able to recover a cigar with mold? I know plume/bloom is normal on the wrapper, however I noticed some white fuzz in spots on all three feet of the Ashton 898s in my humidor. I originally thought it was just plume based on what I saw on the wrapper, but I know (or think) it doesn't occur on the foot. These have been in my humidor since last May. I'm a little confused since I keep the humidity at around 68-69% humidity (never above 70%) and have read that mold usually doesn't occur unless you store them at 75%+ or higher. So the question is how sure can I be that it is mold? And if it is, is there any way to salvage? These 898s are Lonsdales. What I did so far was clean off the wrapper and cut about 1" off each foot. They sit outside of the humidor right now before I figure if I can put them back in or not. I don't want to lose them if I don't have to. FWIW, I checked all of my other cigars and found no evidence of mold. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-20-2012, 06:42 AM	#1101 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	That could be it. They were sitting on the top tray just above one of my small jars of gel. But then again my Padron 26s are on the other side just above another identical jar and they are fine. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-20-2012, 06:56 PM	#1102 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Well there are a few things to ask.. 1. How old are the cigars? 2. How accurate is your hydrometer ( how did you calibrate it ) ? 3. Do you refresh your humidor often? Here is a good read. Simple and to the point. I wouldn't smoke a cigar with bad white mold, because it could have gotten under the wrap and in the leafs. Mold on cigars __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

03-20-2012, 07:00 PM	#1103 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	1. I got them in May '11 so they are at least that old. 2. It's accurate. It's a Xikar digital thermometer and I tested it against my analogs and the damp salt in a bag (~75%). 3. Not really. I am probably going to toss the suckers just to be safe. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-20-2012, 07:17 PM	#1104 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	If it was just spots I would say smoke them, but being a year old and having mold, it's better to play it safe. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

03-27-2012, 11:25 PM	#1107 (permalink)
antennahead A True Z Fanatic Join Date: Mar 2009 Location: Charleston, SC Posts: 15,181 Drives: '07 Z4 "M" Roadster Rep Power: 57	Marshall Fridge \| The coolest icon in music just got cooler. __________________ *Time is a companion, who goes with us on the journey, and reminds us to cherish every moment............ because it will never come again*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Things not to do to your Z	eXo5	Nissan 370Z General Discussions	181	03-28-2018 11:25 PM
Things I Hate	ohmanitsmason	The Lounge (Off Topic)	5	04-05-2010 12:44 PM
What are these things?!!!	SophiaZ	Exterior & Interior	7	01-17-2010 02:11 AM
Things that she can fit inside her bra!	AK370Z	Gentleman's Club	9	09-13-2009 04:03 PM
The little things	Philipp	Nissan 370Z General Discussions	17	08-19-2009 10:59 AM