The New "What did you do with your Z today" (with off topic replies) XXIX

eastwest2300 · 05-14-2018, 09:28 AM

Quote:

Originally Posted by JARblue

Just the RJM clutch pedal. And new shift knob?

They did not drop the transmission. I can only imagine the fit EW would have thrown

eastwest2300 · 05-14-2018, 09:28 AM

I threw a fit putting in that damn RJM pedal...

Leingod · 05-14-2018, 09:29 AM

Quote:

Originally Posted by JARblue

Does Seb attend ZDayZ? He might just be busy getting ready for the upcoming week. He's usually on point in terms of response time - I've gotten a response email from him on Friday evening at 10 pm before.

He responded yesterday that he'd try, but due to mother's day..... Which I totally forgot about because I have no mother worth caring about.

Im sure he will get to me within the next few hours. The guy really is always available to work with. It would be perfect to play email tag with him today since I took today off. Get tuned and be ready before the day is even over with.

eastwest2300 · 05-14-2018, 09:30 AM

Quote:

Originally Posted by Leingod

Car ran great for the most part! I need to inspect the exhaust and see if any bolts are loose. I couldn't tell if it was a rattle under the car or just my old pipes hitting a bar inside the hatch.

No updates or word FROM Seb yet sadly. The few times I tried to play with the throttle, the car hesitated deeply at 6k rpm and wouldn't go any higher. Gear shifts are stupidly smooth now and the clutch pedal is out of this world! The travel action is buttery smooth and I maybe have to press the clutch down a whole 2 inches to shift.

I'll be working on a block off plate for the oil cooler today. Temps barely got above 160F late last night due to it only being 55F out upon reaching home.

All in all. Very impressed and will only get better once Seb begins working with me. I owe those Michigan guys a lot!

Thats the danger zone.. thats where you gotta be careful

Leingod · 05-14-2018, 09:31 AM

Yea. I left it alone and just kept it on cruise the whole way back. I only had to do 1 or 2 hard launches to get up to speed. The car handled beautifully. It won't be driven much until Seb begins work now.

Im still doing a block off plate just to be on the safe end. Just a quick aluminum sheet and some velcro. Hahaha.

JARblue · 05-14-2018, 09:33 AM

Quote:

Originally Posted by eastwest2300

I threw a fit putting in that damn RJM pedal...

Pretty sure the last one I installed took less time to install that it took to remove the OEM pedal. It was about 30 minutes total. After so many installs, I now know exactly which sockets and extensions and ratchets work best in the cramped space.

JARblue · 05-14-2018, 09:35 AM

Quote:

Originally Posted by eastwest2300

Thats the danger zone.. thats where you gotta be careful

Don't want to be driving for any length of time at temps much lower than that. The oil temp gauge inside the car reads about 20F low from what I can tell and you generally want oil temps to hit at least 180F.

eastwest2300 · 05-14-2018, 09:40 AM

Quote:

Originally Posted by JARblue

Pretty sure the last one I installed took less time to install that it took to remove the OEM pedal. It was about 30 minutes total. After so many installs, I now know exactly which sockets and extensions and ratchets work best in the cramped space.

yeah we pulled the seat, as soon I as I got there on day 1..

eastwest2300 · 05-14-2018, 09:40 AM

Quote:

Originally Posted by JARblue

Don't want to be driving for any length of time at temps much lower than that. The oil temp gauge inside the car reads about 20F low from what I can tell and you generally want oil temps to hit at least 180F.

eastwest2300 · 05-14-2018, 09:41 AM

yeah brother, them oil coolers do some funky stuff to your oil temps, its amazing how fast the temps can fluctuate.

eastwest2300 · 05-14-2018, 09:42 AM

Im gonna eventually upgrade to the v.3 rjm pedal..its THAT nicer than the 1st 2 versions.

JLarson · 05-14-2018, 09:42 AM

Quote:

Originally Posted by eastwest2300

I threw a fit putting in that damn RJM pedal...

I just installed mine yesterday. Easy! Did cut my knuckle pretty badly though under the dashboard... 14mm nut broke loose very abruptly on one of the switches. The only annoying part was trying to get the limiter switch wire clip with needle nose pliers... that took me probably 10 minutes.

JLarson · 05-14-2018, 09:43 AM

Quote:

Originally Posted by eastwest2300

Im gonna eventually upgrade to the v.3 rjm pedal..its THAT nicer than the 1st 2 versions.

Ah maybe that's the difference, I had the v3.

Leingod · 05-14-2018, 09:46 AM

Yea. Plate is def being made Nd going on today. Not risking anything for a simple 5 minute fix.

Leingod · 05-14-2018, 09:46 AM

Also. If Susan doesn't wake up soon, I'm going to lunch without her. Haven't eaten since Perrins yesterday and starving right now. Need more taco Bell.

05-14-2018, 09:28 AM	#1667 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,818 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684549	I threw a fit putting in that damn RJM pedal... Rusty likes this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

05-14-2018, 09:31 AM	#1670 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	Yea. I left it alone and just kept it on cruise the whole way back. I only had to do 1 or 2 hard launches to get up to speed. The car handled beautifully. It won't be driven much until Seb begins work now. Im still doing a block off plate just to be on the safe end. Just a quick aluminum sheet and some velcro. Hahaha. eastwest2300 likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

05-14-2018, 09:41 AM	#1675 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,818 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684549	yeah brother, them oil coolers do some funky stuff to your oil temps, its amazing how fast the temps can fluctuate. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

05-14-2018, 09:42 AM	#1676 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,818 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684549	Im gonna eventually upgrade to the v.3 rjm pedal..its THAT nicer than the 1st 2 versions. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

05-14-2018, 09:46 AM	#1679 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	Yea. Plate is def being made Nd going on today. Not risking anything for a simple 5 minute fix. eastwest2300 likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

05-14-2018, 09:46 AM	#1680 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	Also. If Susan doesn't wake up soon, I'm going to lunch without her. Haven't eaten since Perrins yesterday and starving right now. Need more taco Bell. eastwest2300 likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 10:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 07:08 AM
The New "What did you do with your Z today" (with off topic replies) XXVI	JARblue	The Lounge (Off Topic)	10020	04-23-2017 11:37 AM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM