Anyone with GO KART building experience :)

Minsu · 06-16-2015, 08:08 PM

Tell me im reaching for the heavens here, but im trying to make something similar to a BAC MONO. But with a 1000cc engine and hopefully 700-800 pounds max. Im gonna need an engine and a differential, the chassis i guess i would hehe, copy the mono's to the best of my ability.

Rusty · 06-17-2015, 12:31 AM

Quote:

Originally Posted by Minsu

Tell me im reaching for the heavens here, but im trying to make something similar to a BAC MONO. But with a 1000cc engine and hopefully 700-800 pounds max. Im gonna need an engine and a differential, the chassis i guess i would hehe, copy the mono's to the best of my ability.

How deep are your pockets? To do something like the Bac Mono will take some $$ For an engine. Look into a junk yard for a 1000 'zuki motor. Parts for them are easy to get.

LAVA · 06-17-2015, 04:29 AM

Quote:

Originally Posted by Minsu

Tell me im reaching for the heavens here, but im trying to make something similar to a BAC MONO. But with a 1000cc engine and hopefully 700-800 pounds max. Im gonna need an engine and a differential, the chassis i guess i would hehe, copy the mono's to the best of my ability.

Depends on you fabrication skills and tools/equipment

scottIN · 06-17-2015, 06:37 AM

Dude. You in no way need that size of an engine. Or that much weight. My kart weighs about 175 lbs. and with a 125cc (26 hp) engine will do 75. Shifter karts with a 250cc moto engine (42 hp) are pretty much uncontrollable. 0-60 in less than 2 seconds.

The engine is the easy part. The chassis / ackerman, etc. is the hard part. Becasue a kart is direct drive, solid axle, the chassis has to be able to twist to lift the inside rear wheel off the ground to turn it. If not, you're stuck going straight (or will overload / bog the engine with every turn).

Minsu · 06-17-2015, 11:05 AM

Quote:

Originally Posted by scottIN

Dude. You in no way need that size of an engine. Or that much weight. My kart weighs about 175 lbs. and with a 125cc (26 hp) engine will do 75. Shifter karts with a 250cc moto engine (42 hp) are pretty much uncontrollable. 0-60 in less than 2 seconds.

The engine is the easy part. The chassis / ackerman, etc. is the hard part. Becasue a kart is direct drive, solid axle, the chassis has to be able to twist to lift the inside rear wheel off the ground to turn it. If not, you're stuck going straight (or will overload / bog the engine with every turn).

I guessing the difference would be a narrow front or a 2:1 rear:frot ratio to help with torsion. Something similar to the ATOM vs a 1:1 box chassis.

LAVA · 06-17-2015, 01:56 PM

Quote:

Originally Posted by scottIN

Dude. You in no way need that size of an engine. Or that much weight. My kart weighs about 175 lbs. and with a 125cc (26 hp) engine will do 75. Shifter karts with a 250cc moto engine (42 hp) are pretty much uncontrollable. 0-60 in less than 2 seconds.

The engine is the easy part. The chassis / ackerman, etc. is the hard part. Becasue a kart is direct drive, solid axle, the chassis has to be able to twist to lift the inside rear wheel off the ground to turn it. If not, you're stuck going straight (or will overload / bog the engine with every turn).

The key word there is "need"... of course a kart doesn't need 120+ HP but ohhh the fun!! I'm guessing you haven't heard of the gixxer kart.
Click me

It's becoming increasingly popular to throw sportbike motors in anything and everything. Check this out.

DEpointfive0 · 06-17-2015, 06:47 AM

Quote:

Originally Posted by Minsu

Tell me im reaching for the heavens here, but im trying to make something similar to a BAC MONO. But with a 1000cc engine and hopefully 700-800 pounds max. Im gonna need an engine and a differential, the chassis i guess i would hehe, copy the mono's to the best of my ability.

That's not a go kart then, that's a mini race car.

06-16-2015, 08:08 PM	#1 (permalink)
Minsu A True Z Fanatic Join Date: Jul 2012 Location: New Jersey Posts: 1,401 Drives: 2013 MidBlue 370Z 6M Rep Power: 24	Tell me im reaching for the heavens here, but im trying to make something similar to a BAC MONO. But with a 1000cc engine and hopefully 700-800 pounds max. Im gonna need an engine and a differential, the chassis i guess i would hehe, copy the mono's to the best of my ability. __________________ I figured, Get High, Take the Test High, Get HIGH Scoes

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does anyone know how to Build a Go Kart	Minsu	The Lounge (Off Topic)	44	04-30-2014 03:57 PM
How to be the fastest at the Go-Kart Track	ZCarMan	Mid-Atlantic Region	19	05-03-2013 09:40 PM
My Go Kart Catch Can Install	NeverBoneStck	Engine & Drivetrain	6	07-31-2012 11:04 PM
New kart racing facility in Phoenix	daygoVR6	Western Region	23	02-25-2011 02:52 PM
Spring Z vs G Go-Kart Challenge April 25@1pm	Southgachik	South East Region	2	04-11-2010 11:52 AM

06-17-2015, 06:37 AM	#4 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	Dude. You in no way need that size of an engine. Or that much weight. My kart weighs about 175 lbs. and with a 125cc (26 hp) engine will do 75. Shifter karts with a 250cc moto engine (42 hp) are pretty much uncontrollable. 0-60 in less than 2 seconds. The engine is the easy part. The chassis / ackerman, etc. is the hard part. Becasue a kart is direct drive, solid axle, the chassis has to be able to twist to lift the inside rear wheel off the ground to turn it. If not, you're stuck going straight (or will overload / bog the engine with every turn).