ok almost everything is here I will have pics tonight of all the parts, and I did a quick test fit last weekend and things looked good, BTW I'm mounting the adapter plate right the the rad support inline with the stock intake duct and going from there to behind the grill. Only will have to move the horn a bit :) We'll see

Ok hers what's going in, :)

Ok s I started the install last night as today I'm driving the wife around for a fitness show ;)
I started by mounting the adapter plates to the radiator support over the stock air ducking tunnel with self tapping screws, the in attached the 90 degree elbow an ran the 3inch intake piping hich wind up don behind the front bumper support ( I didn't like them down there just above the skid plate. And I also couldnt mount the CF air scoopes I bought. So I remived the intake piping and just attached the scoops right to the elbows. Looks good and I can hear them sucking air so they're working LOL. I took some pics but was dark and started to rain I take some more tomorrow. But here's a few for now .
I also bougt a aluminim blade for my table saw I'm going to make some more changes so stay tuned ;)

Phone won't let me adds pics I'll ipdate in an hour when I'm home getting an oil change :/

Good to hear, ill be waiting for pics! :tup:

Also, let us know if the butt dyno reports any gains :icon17:

Looks good, and good luck -- but do you have a dyno from before they were added...?

I do have a dyno but from a place I will never go to again (Horror story on here) , I Was think of going out an get a log or 2 to see the MAF readings

So here's the pics , Going to go out to Pepboys and see if I can get a few more things to bracket these to the support in the middle

Also dyno coming the 25th

Strapping her down right now !

285 WHP and 231 WHTQ . Will have sheets later when the get emailed to me . Pretty happy I have the overlay from my coupes run with stock manifold , Takedas and the same catBack and FI RHFC's. My coupe made 15 more WHP tho not sure if the tune needs work but that car really falls off up top compared to my the run

Looks like the AF's were ? 12's started in the 14's and ending in the 12's( 12.2's) Needs to be leaner ?