Z1 Manifold

ANMVQ · 08-03-2014, 02:24 PM

Ok guys I've searched here on myg37 and couldn't really find anything on the Z1. Heck I only found 3 threads on the Motordyne and one guy lost 10WHP?
Why is there more on the internet about the Motordyne on than Z1?
I want to get the Z1 for one reason one Motordyne thread had some info on the Z1 and the Z1 made more overal and up top. And the other is it's half the price ?
Anyone with real info or data on the Z1 not just what Z1 claims .
Thanx guys

Minato · 08-03-2014, 02:52 PM

Z1 mainfold hasn't been out as long, no one seems to have gotten one and dynoed it, only have the z1 dyno to rely on.

binary0x01 · 08-03-2014, 03:00 PM

Yeah I'm interested in folks trying their 400HP (at crank) package without the test pipes. I'd like to see dyno of that.

aszyd · 08-03-2014, 05:44 PM

I have the manifold and just got tuned at Z1 last Friday. Put down 322 / 260. I'm going to e-mail them tomorrow to see if they saved any of my charts. John did mention that I would be down on power because of the humidity. He has been seeing about a 15 WHP loss on their other cars.

TheBoomSpoon · 08-03-2014, 05:51 PM

Quote:

Originally Posted by aszyd

I have the manifold and just got tuned at Z1 last Friday. Put down 322 / 260. I'm going to e-mail them tomorrow to see if they saved any of my charts. John did mention that I would be down on power because of the humidity. He has been seeing about a 15 WHP loss on their other cars.

That isn't only mod right?

Japanjay · 08-03-2014, 05:53 PM

You answer is right above you in his sig....

TheBoomSpoon · 08-03-2014, 05:54 PM

Quote:

Originally Posted by Japanjay

You answer is right above you in his sig....

Well on my phone using tapitalk i dont see a signature and i always access via mobile

aszyd · 08-03-2014, 06:32 PM

My mods, that would affect the tune / WHP.

Stillen G3 intakes
Bored throttle bodies
Z1 manifold
NST UD pulley
Fast Intentions LTH
Motordyne resonated Y pipe
Tomei 3" single exhaust
Competition Clutch 18 LB flywheel

TheBoomSpoon · 08-03-2014, 06:35 PM

Quote:

Originally Posted by aszyd

My mods, that would affect the tune / WHP.

Stillen G3 intakes
Bored throttle bodies
Z1 manifold
NST UD pulley
Fast Intentions LTH
Motordyne resonated Y pipe
Tomei 3" single exhaust
Competition Clutch 18 LB flywheel

Thx. Appreciate it. Damn good results. I've also discovered i can open a specific post in phone browser to see the sigs....

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Eclipz · 08-03-2014, 07:11 PM

Won't the stillen intakes be choking the bored throttle bodies

aszyd · 08-03-2014, 07:49 PM

It's possible, but I'm pretty much done with this round of the engine build. So I'm not going to spend the money on fabbing up a new intake.

I have family in GA, so perhaps closer to the holidays, I can look into getting a new intake and port matching the lower manifold. Then, paying another visit to Z1 for a retune, while I am up there with the family.

I'm not ready to pull another round trip to GA just for a few extra HP.

That being said, I am seriously considering a Boosted Performance single turbo build. It won't happen for quite some time, but why spend any more money if I am going to tear it all out for FI?

ANMVQ · 08-03-2014, 07:50 PM

Quote:

Originally Posted by aszyd

I have the manifold and just got tuned at Z1 last Friday. Put down 322 / 260. I'm going to e-mail them tomorrow to see if they saved any of my charts. John did mention that I would be down on power because of the humidity. He has been seeing about a 15 WHP loss on their other cars.

Thanx man , but to many mods to see just what the intake would do, LTH, and HFCS, intake and exhaust , will net you 315 or so WHP on their own.
I'm just trying to get an idea what gains from just the manifold are
I won't be getting headers and only maybe FI RHFC'S .

Japanjay · 08-03-2014, 10:42 PM

Quote:

Originally Posted by aszyd

It's possible, but I'm pretty much done with this round of the engine build. So I'm not going to spend the money on fabbing up a new intake.

I have family in GA, so perhaps closer to the holidays, I can look into getting a new intake and port matching the lower manifold. Then, paying another visit to Z1 for a retune, while I am up there with the family.

I'm not ready to pull another round trip to GA just for a few extra HP.

That being said, I am seriously considering a Boosted Performance single turbo build. It won't happen for quite some time, but why spend any more money if I am going to tear it all out for FI?

I am doing the same. I am now done doing anything to the motor. Planning a BP kit for this winter. Got everything I want besides the Tomie shorty headers which I will pair with that kit.

Also was 322 SAE or STD?

SlowZ · 08-04-2014, 12:47 AM

Quote:

Originally Posted by aszyd

It's possible, but I'm pretty much done with this round of the engine build. So I'm not going to spend the money on fabbing up a new intake.

I have family in GA, so perhaps closer to the holidays, I can look into getting a new intake and port matching the lower manifold. Then, paying another visit to Z1 for a retune, while I am up there with the family.

I'm not ready to pull another round trip to GA just for a few extra HP.

That being said, I am seriously considering a Boosted Performance single turbo build. It won't happen for quite some time, but why spend any more money if I am going to tear it all out for FI?

Why would the g3's choke the bored TB? If the TB are bored that means they are able to get more air in there.

synolimit · 08-04-2014, 03:18 AM

Quote:

Originally Posted by Eclipz

Won't the stillen intakes be choking the bored throttle bodies

after talking to people and after selling the TB's to aszyd i think yes. a system should run large to small and not small to large. think of a turbo compressor. as the area shinks the air speeds up. the Stillen is good for OEM as both the Stillen and OEM TB's are 2.35" ID. now that he has 2.48" ID TB's the system is backwards. I'll be testing this on the 8th as I too have the TB's, upper and also a lower mani thats ported but i made a new intake thats going from 2.35" ID like the Stillen to 2.63" ID so the system will go larger to smaller.

08-03-2014, 02:24 PM	#1 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Z1 Manifold Ok guys I've searched here on myg37 and couldn't really find anything on the Z1. Heck I only found 3 threads on the Motordyne and one guy lost 10WHP? Why is there more on the internet about the Motordyne on than Z1? I want to get the Z1 for one reason one Motordyne thread had some info on the Z1 and the Z1 made more overal and up top. And the other is it's half the price ? Anyone with real info or data on the Z1 not just what Z1 claims . Thanx guys __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-03-2014, 03:00 PM	#3 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 13	Yeah I'm interested in folks trying their 400HP (at crank) package without the test pipes. I'd like to see dyno of that. __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

08-03-2014, 05:44 PM	#4 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 20	I have the manifold and just got tuned at Z1 last Friday. Put down 322 / 260. I'm going to e-mail them tomorrow to see if they saved any of my charts. John did mention that I would be down on power because of the humidity. He has been seeing about a 15 WHP loss on their other cars. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-03-2014, 06:32 PM	#8 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 20	My mods, that would affect the tune / WHP. Stillen G3 intakes Bored throttle bodies Z1 manifold NST UD pulley Fast Intentions LTH Motordyne resonated Y pipe Tomei 3" single exhaust Competition Clutch 18 LB flywheel __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-03-2014, 07:49 PM	#11 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 20	It's possible, but I'm pretty much done with this round of the engine build. So I'm not going to spend the money on fabbing up a new intake. I have family in GA, so perhaps closer to the holidays, I can look into getting a new intake and port matching the lower manifold. Then, paying another visit to Z1 for a retune, while I am up there with the family. I'm not ready to pull another round trip to GA just for a few extra HP. That being said, I am seriously considering a Boosted Performance single turbo build. It won't happen for quite some time, but why spend any more money if I am going to tear it all out for FI? __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM Last edited by aszyd; 08-03-2014 at 07:51 PM.

08-03-2014, 02:52 PM	#2 (permalink)
Minato Base Member Join Date: May 2013 Location: Ft Collins Posts: 107 Drives: 11 370Z M6 Sports Rep Power: 0	Z1 mainfold hasn't been out as long, no one seems to have gotten one and dynoed it, only have the z1 dyno to rely on.

08-03-2014, 05:53 PM	#6 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	You answer is right above you in his sig....

08-03-2014, 07:11 PM	#10 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	Won't the stillen intakes be choking the bored throttle bodies

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 09:13 AM
Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite	synolimit	Intake/Exhaust	799	03-11-2015 01:43 AM
[FOR SALE] Z1 Manifold New!	kornflake7	Parts for sale (Private Classifieds)	4	04-17-2014 05:36 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 06:17 PM
Amuse Manifold	phelan	Intake/Exhaust	18	03-08-2011 07:46 AM