New Soho Single exit for the 370z!!

Japanjay

The BP has 2 exhaust pipes that bolt up the 2 pipes on the F/I exhaust, hence why it wont work with a single....

Gregor12

The BP is a single turbo kit, so it should only have one downpipe... from the pics in is thread it only has a single outlet. im not sure what two pipes you're talking about. unless you're talking about the dump tube that routes back into the down pipe from the single turbo. after that is where the soho y back should bolt up. or any other 370z y back piece.

SS_Firehawk

A if the exhaust has the same mounting point as the stock Y pipe, that fits too.

__________________

hide187

Gregor12

Thank you sir. that is what I was trying to get at lol from the pics it looks like it is in the same location. most exhaust systems replace the factory y pipe. These are the exhaust systems that will not work. Someone just needs to ask Sasha lol

Japanjay

I did ask him. I am telling you what he told me. The B/P kit was designed to go with the F/I exhaust. Ask yourself this. Will a F/I exhaust bolt to a y-pipe or does it delete the y-pipe and bolts to the cats?

Gregor12

im telling you it will fit lol.... this was copied from his website.

FITS F.I AND OEM AXLE BACK EXHAUST AND ANY OTHER EXHASUT THAT WOULD BOLT UP TO THE OEM Y-PIPE ONLY

Japanjay

I cant find this website you speak of but I can show a picture of one on a 370z and if you look it has "2" pipes that mate to a F/I exhaust. I think you are looking at the kits for the DE's which do in fact use a single exhaust pipe..... I really hate going to this extent, especially since I spoke with sasha and the "pictures" are readily available on the internet if you just search. Now once you study these pictures, explain to me how this looks like it bolts to a factory exhaust, meaning that a single will work, and post the link where you found that it specifically states that it will work with factory. I could even go as far as posting this in ALL CAPS AS WELL TO GET THE POINT ACROSSSSSS!!!! I even drew in red arrows to clearly point to the 2 flanges, before those 2 flanges the driver side pipe catches the resurq from the wastegate, then the 2 pipes merge into one, which comes from the hot side of the turbine housing....

BP kit on a 370z with the F/I exhaust which it is designed soley for:


F/I exhaust on a 370z:


Unless you find another exhaust that has the IDENTICAL FLANGE DESIGN AND PLACEMENT YOU WONT JUST BE ABLE TO BOLT A BP KIT UP TO YOUR EXHAUST WITHOUT MODIFICATION. Which can be done and I would recommend it be done to the exhaust not the kit or it will make it a tough resale when you part out.... Just sayin

Gregor12

Damn man, you went all out lol I didn't post in all caps. That was copied directly from his member page. Go to the BP member page and go to the last page of the visitors messages. All the info for the kit is right there.

Phil


Sent from my iPad using Tapatalk HD

synolimit

.

Attached Images

image.jpg (278.3 KB, 17 views)

__________________
13 370z-

Japanjay

One last picture just for effect:

Factory exhaust from 370z:

javi370z

Go back and read the BP threads again. Sasha offers the kit for the FI exhaust as well as oem style exhaust.

Gregor12

600hp stock exhaust sleeper

swiss370Z

Great



BTW: It's time to change your rear tires.....

__________________
/// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

Japanjay

When the hell did he start doing that? I spoke with him only a few months ago about it and said he didn't have any plans on that. I stand corrected and now I don't have to have a kit built down in Portland at PSI. Saves me time and trouble. I honestly haven't been keeping up with his stuff since he said he had no plans on doing anything besides the original design. This actually is great news to me!