Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite

JARblue · 03-10-2015, 05:58 PM

Quote:

Originally Posted by Scott@Synergy

Lmao then how did it get in my mailbox? Did I go inside to the post office and steal it? God for bid the United States Postal Service ever would make a mistake like this. Can you read return to sender on any of the three stamps on that box? Because I sure can't.

lol you're the one who posted up a picture of an unreadable stamp on the box and then posted a picture of the supposed stamp, which read "Return to Sender. Received Without Contents." Of course the post office makes mistakes. But your story did not seem legit when considering all the evidence. And quit trying to argue your case. You got Guru's money, so just shut up about it. You're not going to change anyone's mind here.

Trips · 03-10-2015, 05:59 PM

AK370Z · 03-11-2015, 01:43 AM

Thank you Trips for closing the thread. I will be looking into this matter and discuss it among admins/mods. While I investigate this, if you want to get in touch with Scott in the meantime, please pm him. You're always welcome to pm me or cc me in any pm.

Thank you for your patience.

AK

LNATKFRNG · 07-16-2014, 08:44 PM

For a minute i thought you were going to tell us how you really feel.. good luck with finding a shop it is frustratingly difficult at times

gomer_110 · 07-16-2014, 09:05 PM

Quote:

Originally Posted by synolimit

Well r/t tuning is PA is out! They're out of their ******* minds if they think I'm driving 8hrs and spending over $700 for a tune where they are doing nothing special and aren't breaking any ground over anyone else. Tuning for this car is a ******* rip. So sick of people's greed and ******* entitlement that because a car costs more money that they think they deserve more money because of it!! Most shops labor rates are $100 and that's for HARD labor. Like pulling a transmission for a clutch or motor work. Why the **** do you think you're worth over $200 an hour to punch buttons? I tuned my WRX to over 330hp and 396tq with bolt ons and stock everything. Its nothing special and with so many other tuners you'd think you'd want to be competitive. Again, your tunes nothing special. Everyone has been making the same power for YEARS! Only people who think they make more are cheating using STD on a dynojet or cheating with a mustang or dynapak's settings.

End rant

While I completely agree with your frustration, I have to say that the $200/hr is almost certainly more than just a labor rate. Just a quick search of the internets for used dynos show prices from $20k to $40k, which means new ones are probably considerably more. That $200/hr is probably more like $50/hr labor and $150/hr dyno time so the shop can get a return on their investment.

Also have you checked into Dynosty in Louisville, KY. No personal experience with them but have heard decent reviews.

1slow370 · 11-24-2014, 07:33 PM

I already have a zillion NA hp so i'm just watchin for the K.O.'s

synolimit · 11-25-2014, 04:48 PM

Quote:

Originally Posted by 1slow370

I already have a zillion NA hp so i'm just watchin for the K.O.'s

You got me by 41hp, not a zillion and relative small amount for the mani and cams.

1slow370 · 11-25-2014, 05:44 PM

Quote:

Originally Posted by synolimit

You got me by 41hp, not a zillion and relative small amount for the mani and cams.

or relatively double your gains

03-10-2015, 05:59 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland Posts: 8,736 Drives: 🔰 Rep Power: 10	__________________

03-11-2015, 01:43 AM	#3 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,931 Drives: 09 370Z MB Sports M6 Rep Power: 10	Thank you Trips for closing the thread. I will be looking into this matter and discuss it among admins/mods. While I investigate this, if you want to get in touch with Scott in the meantime, please pm him. You're always welcome to pm me or cc me in any pm. Thank you for your patience. AK __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

07-16-2014, 08:44 PM	#4 (permalink)
LNATKFRNG Base Member Join Date: Jun 2013 Location: Ocala Posts: 158 Drives: 370z pearl white Rep Power: 14	For a minute i thought you were going to tell us how you really feel.. good luck with finding a shop it is frustratingly difficult at times __________________ '09 sport package

11-24-2014, 07:33 PM	#6 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	I already have a zillion NA hp so i'm just watchin for the K.O.'s __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 09:13 AM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 01:46 PM
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 09:37 AM