Measurement from the G3's

Japanjay · 07-09-2013, 10:41 PM

So I need some help from the guys with the Stillen G3's installed. I need to know the distance on the drivers side tube, from the bumper side of the triangulation bar down to the corner of the MAF sensor bung weld line closest to the bar. And then on the passengers side, same side of triangulation bar down to the first slight bend right before the MAF sensor. Any help would be greatly appreciated and please be accurate as possible, due to me needing this for some custom paint work on the new pipes. I will be installing them after the powdercoat and paint work, so I cant get the measurement myself.

Japanjay · 07-10-2013, 04:53 PM

Bueller?

Japanjay · 07-13-2013, 02:32 AM

Jesus I cant believe that is not one person that can go into the garage, pop the hood, take a measure, then post it on here. I am going to have to do a test fit and waste a ton of time taking apart and putting back together twice for a measurement.

DEpointfive0 · 07-13-2013, 02:36 AM

Lol, can I give you the info without it being installed on my car? I have the tubes and such, just not installed

Rob63 · 07-13-2013, 02:58 AM

Not wanting to be too picky, LHD or RHD? Just stick to LH or RH side and if you can be a bit more descriptive I'll measure now as my bonnet's up ready ;-)

Rob63 · 07-14-2013, 01:11 AM

Quote:

Originally Posted by Japanjay

Jesus I cant believe that is not one person that can go into the garage, pop the hood, take a measure, then post it on here. I am going to have to do a test fit and waste a ton of time taking apart and putting back together twice for a measurement.

Jesus, I can't believe you can't bothered to reply...

Xplicit97 · 07-14-2013, 01:20 AM

I think he needs measurements installed.. ill hit him up and have him reply.. thanks for the info guys. I know he was at a show all day.

Sent from my SPH-L710 using Tapatalk 2

Rob63 · 07-14-2013, 01:34 AM

Quote:

Originally Posted by Xplicit97

I think he needs measurements installed.. ill hit him up and have him reply.. thanks for the info guys. I know he was at a show all day.

Sent from my SPH-L710 using Tapatalk 2

Mine's installed...

Rob63 · 07-14-2013, 04:26 AM

Quote:

Originally Posted by Rob63

Mine's installed...

Offer to measure now 'timed out'...

Japanjay · 07-14-2013, 02:57 PM

It would installed. Kinda hard to make those measurements as close as possible with the bar sitting on the ground the piping just laying under it.

Here is a picture. The yellow lines indicate the measurements I need. Thank you to anyone that can get this for me. Driver side is from the edge of the bar the welds of the MAF bung straight down the center of the pipe. Don't have to go from the edge directly to the spot of the weld, but draw a line as if you were to cut the pipe right at the weld. Passenger side, from the edge of the bar to the first slight bend centered on the pipe.

Reason I need this is because I am going to have a pin stripper lay some lettering on top of the powder coating in that area since it is the only real spot to put it. Makes sense why stillen chose the same spot to put their logo. And what I am getting has to be symmetrical, unlike the reference between the stillen logo in this picture on the passenger side versus the driver side. Stillen buried the logo hallway under the bar on the drivers side tube.

synolimit · 07-14-2013, 03:33 PM

Any reason those MAF locations are so different? One would think they should be equal so both sides of the motor get the same readings and such.

Anyone know the ID of the pipe at the MAF flange?

07-09-2013, 10:41 PM	#1 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Measurement from the G3's So I need some help from the guys with the Stillen G3's installed. I need to know the distance on the drivers side tube, from the bumper side of the triangulation bar down to the corner of the MAF sensor bung weld line closest to the bar. And then on the passengers side, same side of triangulation bar down to the first slight bend right before the MAF sensor. Any help would be greatly appreciated and please be accurate as possible, due to me needing this for some custom paint work on the new pipes. I will be installing them after the powdercoat and paint work, so I cant get the measurement myself.

07-10-2013, 04:53 PM	#2 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Bueller? DEpointfive0 likes this.

07-13-2013, 02:36 AM	#4 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Lol, can I give you the info without it being installed on my car? I have the tubes and such, just not installed __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

07-13-2013, 02:58 AM	#5 (permalink)
Rob63 Base Member Join Date: May 2013 Location: UK Posts: 24 Drives: 370Z 2010 White Auto Rep Power: 11	Not wanting to be too picky, LHD or RHD? Just stick to LH or RH side and if you can be a bit more descriptive I'll measure now as my bonnet's up ready ;-) DEpointfive0 likes this.

07-14-2013, 01:20 AM	#7 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	I think he needs measurements installed.. ill hit him up and have him reply.. thanks for the info guys. I know he was at a show all day. Sent from my SPH-L710 using Tapatalk 2 DEpointfive0 likes this. __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

07-13-2013, 02:32 AM	#3 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Jesus I cant believe that is not one person that can go into the garage, pop the hood, take a measure, then post it on here. I am going to have to do a test fit and waste a ton of time taking apart and putting back together twice for a measurement.

07-14-2013, 02:57 PM	#10 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	It would installed. Kinda hard to make those measurements as close as possible with the bar sitting on the ground the piping just laying under it. Here is a picture. The yellow lines indicate the measurements I need. Thank you to anyone that can get this for me. Driver side is from the edge of the bar the welds of the MAF bung straight down the center of the pipe. Don't have to go from the edge directly to the spot of the weld, but draw a line as if you were to cut the pipe right at the weld. Passenger side, from the edge of the bar to the first slight bend centered on the pipe. Reason I need this is because I am going to have a pin stripper lay some lettering on top of the powder coating in that area since it is the only real spot to put it. Makes sense why stillen chose the same spot to put their logo. And what I am getting has to be symmetrical, unlike the reference between the stillen logo in this picture on the passenger side versus the driver side. Stillen buried the logo hallway under the bar on the drivers side tube. Last edited by Japanjay; 07-14-2013 at 03:02 PM.

07-14-2013, 03:33 PM	#11 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Any reason those MAF locations are so different? One would think they should be equal so both sides of the motor get the same readings and such. Anyone know the ID of the pipe at the MAF flange? __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simple Measurement Please	osbornsm	Nissan 370Z General Discussions	3	03-16-2012 08:40 AM
[WTB] Stillen G3's	Methodical4u	Parts for sale (Private Classifieds)	2	10-31-2011 01:17 AM
Z-store Rear Cargo mat measurement request	Liquid_G	Exterior & Interior	2	06-06-2010 10:11 PM
Where should the oil be on the dip stick measurement	ryanboy	Nissan 370Z General Discussions	4	03-02-2010 02:09 PM