Help removing muffler bolts

luigi90210 · 07-08-2013, 11:50 PM

I was wondering if there are any tricks to removing the bolts on the muffler?

red2010z · 07-08-2013, 11:58 PM

Called a torch!

EastBayZed · 07-09-2013, 12:06 AM

PB blaster, wait 5 minutes, and use a 1/2" wrench with breaker bar if necessary. Thats what worked for me when I did my sway bar install.

luigi90210 · 07-09-2013, 12:12 AM

Quote:

Originally Posted by EastBayZed

PB blaster, wait 5 minutes, and use a 1/2" wrench with breaker bar if necessary. Thats what worked for me when I did my sway bar install.

im going to have to try PB blaster, unfortunately i dont have a breaker bar, just a 14mm spanner

the A man · 07-09-2013, 02:04 AM

I was having trouble too but my dad came to help. He put a wrench through the other one and boom it was done. Spray some WD40 and make sure u have an extension to creat leverage.

DEpointfive0 · 07-09-2013, 02:08 AM

You can bang it a few times after you apply your favorite lube... (Pun intended? Lol)

( Click to show/hide )

Elan · 07-09-2013, 02:24 AM

Yep PB Blaster works great. I sprayed mine on while the car was cooling and about 2 hours later, sprayed more and got to work. I was able to get 3 off, but for the 4th, I was so physically exhausted because I didn't have a breaker bar, I called my dad in for some fresh muscle and it popped off and all downhill from there. The most annoying bolts for me were the right exhaust hanger. You have to get it at a weird angle with an extension so you don't have must room to work with yet alone break the bolts, but again PB blasted it and with some slight of hand, it came off. Oh and watch your eyes. My dad and I both took bolts to the face when trying to put them back on. Painful. Good luck!

I did my exhaust at 27,000 miles which is lower but if you have a higher mileage car, you may need the torch.

luigi90210 · 07-09-2013, 12:46 PM

Quote:

Originally Posted by Elan

Yep PB Blaster works great. I sprayed mine on while the car was cooling and about 2 hours later, sprayed more and got to work. I was able to get 3 off, but for the 4th, I was so physically exhausted because I didn't have a breaker bar, I called my dad in for some fresh muscle and it popped off and all downhill from there. The most annoying bolts for me were the right exhaust hanger. You have to get it at a weird angle with an extension so you don't have must room to work with yet alone break the bolts, but again PB blasted it and with some slight of hand, it came off. Oh and watch your eyes. My dad and I both took bolts to the face when trying to put them back on. Painful. Good luck!

I did my exhaust at 27,000 miles which is lower but if you have a higher mileage car, you may need the torch.

im doing mine at 30k

it looks like im running down to the store to buy some PB blaster today

so far that seems to be the product everyone recommends

JARblue · 07-09-2013, 12:52 PM

If you still have trouble with the PB Blaster, let it sit longer. Let it soak overnight if you have to.

Chuck33079 · 07-09-2013, 12:54 PM

If your jack has a two piece handle, you can use part of it as a breaker bar if your ratchet fits inside it. I've done it in the past. I've also very carefully put my jack under the wrench and slowly carefully used the jack to turn the wrench.

Bret86944 · 07-09-2013, 01:26 PM

If you have an air compressor, an 800 ft-lb impact gun works wonders. Even so, use some PB blaster. That stuff is great.

Bret86944 · 07-09-2013, 01:28 PM

Quote:

Originally Posted by luigi90210

im going to have to try PB blaster, unfortunately i dont have a breaker bar, just a 14mm spanner

I recommend buying a breaker bar. It's one of those tools you will use over and over. Next time you are at harbor freight, they have a 36" for $10. Money well spent.

Chuck33079 · 07-09-2013, 01:30 PM

Quote:

Originally Posted by Bret86944

I recommend buying a breaker bar. It's one of those tools you will use over and over. Next time you are at harbor freight, they have a 36" for $10. Money well spent.

Absolutely. It will become your new best friend working on the car.

122554 · 07-09-2013, 02:42 PM

Piece of pipe is cheaper

USMCASA · 07-09-2013, 03:48 PM

+1 on the breaker bar, used it when i put my AAM ti-short tails on

07-08-2013, 11:50 PM	#1 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	Help removing muffler bolts I was wondering if there are any tricks to removing the bolts on the muffler?

07-08-2013, 11:58 PM	#2 (permalink)
red2010z Track Member Join Date: Apr 2013 Location: Texas/North Carolina Age: 38 Posts: 587 Drives: '10 Red B/S/M Rep Power: 12	Called a torch! luigi90210 likes this. __________________ AGENCY K&N SWIFT CSF EVO-R VOSSEN MICHELIN Z1 JVC ZENCLOSURE JLW3 JVC

07-09-2013, 12:06 AM	#3 (permalink)
EastBayZed Base Member Join Date: Feb 2013 Location: Bay Area Posts: 125 Drives: 370z, Sonata Turbo Rep Power: 12	PB blaster, wait 5 minutes, and use a 1/2" wrench with breaker bar if necessary. Thats what worked for me when I did my sway bar install. DEpointfive0 and luigi90210 like this.

07-09-2013, 02:04 AM	#5 (permalink)
the A man Base Member Join Date: Mar 2012 Location: Los Angeles Age: 34 Posts: 25 Drives: 2012 370z sprt. Rep Power: 13	I was having trouble too but my dad came to help. He put a wrench through the other one and boom it was done. Spray some WD40 and make sure u have an extension to creat leverage. DEpointfive0 likes this.

07-09-2013, 02:08 AM	#6 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	You can bang it a few times after you apply your favorite lube... (Pun intended? Lol) ( Click to show/hide ) But no, seriously, it will jostle the rust a bit JARblue, NickTurnon and luigi90210 like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

07-09-2013, 02:24 AM	#7 (permalink)
Elan Track Member Join Date: May 2013 Location: Alpharetta, GA Posts: 906 Drives: Airplanes Rep Power: 15	Yep PB Blaster works great. I sprayed mine on while the car was cooling and about 2 hours later, sprayed more and got to work. I was able to get 3 off, but for the 4th, I was so physically exhausted because I didn't have a breaker bar, I called my dad in for some fresh muscle and it popped off and all downhill from there. The most annoying bolts for me were the right exhaust hanger. You have to get it at a weird angle with an extension so you don't have must room to work with yet alone break the bolts, but again PB blasted it and with some slight of hand, it came off. Oh and watch your eyes. My dad and I both took bolts to the face when trying to put them back on. Painful. Good luck! I did my exhaust at 27,000 miles which is lower but if you have a higher mileage car, you may need the torch. luigi90210 likes this. __________________ 2009 370Z NISMO #477 \| AAM Competition Short Tails \| AAM Competition HFCs \| K&N Typhoon CAI \| Kenwood DPX300U \| Rockford Fosgate PRIME R300-4 \| Rockford Fosgate Punch P165 \| Rockford Fosgate Punch P300-12 \| Polk Audio db1001 \| 15% Tints \| GTR Start Button \|

07-09-2013, 12:52 PM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	If you still have trouble with the PB Blaster, let it sit longer. Let it soak overnight if you have to. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-09-2013, 12:54 PM	#10 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	If your jack has a two piece handle, you can use part of it as a breaker bar if your ratchet fits inside it. I've done it in the past. I've also very carefully put my jack under the wrench and slowly carefully used the jack to turn the wrench. falconfixer and Cbtech like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-09-2013, 01:26 PM	#11 (permalink)
Bret86944 Base Member Join Date: Jan 2013 Location: Cincinnati Posts: 64 Drives: 2011-base-PW-6mt Rep Power: 12	If you have an air compressor, an 800 ft-lb impact gun works wonders. Even so, use some PB blaster. That stuff is great.

07-09-2013, 02:42 PM	#14 (permalink)
122554 Track Member Join Date: Jan 2013 Location: My own world Posts: 506 Drives: 2010 Nismo Rep Power: 13	Piece of pipe is cheaper __________________ I don't normally drink beer, but when I do....i drink a lot!

07-09-2013, 03:48 PM	#15 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	+1 on the breaker bar, used it when i put my AAM ti-short tails on

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
toe bolts?	import111	Brakes & Suspension	24	04-22-2015 09:08 PM
[FOR SALE] Spc toe bolts, new	BrandonSS	Parts for sale (Private Classifieds)	6	07-11-2013 11:58 AM
[FOR SALE] 08 G37 coupe OEM muffler / 08-12 Nissan 370z muffler	ntn007us	Parts for sale (Private Classifieds)	5	10-15-2012 03:44 PM
WTB Toe Bolts	corbin09	Texas	0	03-16-2012 01:24 PM
Toe bolts...where can I get them?	import111	Brakes & Suspension	0	11-02-2009 06:03 PM