F.I exhaust hanging lower on drivers side

F.I. Inc.

JAYNO20,

The height of the mufflers can be adjusted very easily. First and foremost prior to tightening the mufflers down, the back of the X Pipe needs to be level to the earth as stated in the installation instructions.

The hardware we use for the 3 bolt flange is 3/8" as the hole in the flange is 7/16". This gives you some adjustability both clockwise and counterclockwise. What we do is tighten the right side down first with the rotation so the tip is centered in the cutout. From there we put a level on the front bottom of both mufflers to ensure they are level. We then proceed and tighten the left side. 9 out of 10 times the tips line up perfectly in the cutouts. From there if you need to adjust the tip height, do so accordingly with the washers under the hanger.

If you have any questions on any of this or if what I wrote sounds confusing, call me. I will also pm this to you.

Thanks, Tony

__________________
Follow us on Facebook: Fast Intentions Inc.
Phone: (805) 522-FAST (3278)
Email: tony@fastintentions.com
www.fastintentions.com
"FUELED BY PASSION"