Hey Z1. ETA on those headers?

brucelidat · 05-06-2014, 06:00 PM

judging by the death of this thread, i am assuming people's expectations were not met with these headers, sales dropped off, and there will be no version that mates up with the 370 cats?

2sl0w · 05-06-2014, 06:10 PM

These headers are still setting records for na power. They never really made an official thread .. I would assume they are still selling well. As far as hr/vhr flanges... That is provably best left for z1 to answer.

Sent from my Nexus 5 using Tapatalk

DEpointfive0 · 05-06-2014, 06:27 PM

Quote:

Originally Posted by brucelidat

judging by the death of this thread, i am assuming people's expectations were not met with these headers, sales dropped off, and there will be no version that mates up with the 370 cats?

Quote:

Originally Posted by 2sl0w

These headers are still setting records for na power. They never really made an official thread .. I would assume they are still selling well. As far as hr/vhr flanges... That is provably best left for z1 to answer.

Sent from my Nexus 5 using Tapatalk

LMAO Li, jst go with a SC already/

with 2sl0w

Still set the record, and Z1 has been so busy making other awesome products as well.
The thing that makes it IMO is that Z1 put their money where their mouth is by offering that 400 BHP package. Yeah, it has some caveats, but if you wanted that power, you'd have already gone with that stuff anyways. Also, a LOT of people aren't on this forum that buy Z1's products. I can't imagine it's more than 30%, so reviews will be hard to come by.

brucelidat · 05-06-2014, 07:24 PM

This thread was so hot though, that I assumed there were forum member show ordered it. Haven;'t heard any comments from them though. There was the one guy how was super unhappy, but not too many guys coming in and saying they got good results other than the original couple of guys installed and tuned at z1.

daisuke149 · 05-06-2014, 07:28 PM

Quote:

Originally Posted by brucelidat

This thread was so hot though, that I assumed there were forum member show ordered it. Haven;'t heard any comments from them though. There was the one guy how was super unhappy, but not too many guys coming in and saying they got good results other than the original couple of guys installed and tuned at z1.

if you havnt noticed. everytime a new product is announced, everyone gets up in arms about it and then about 10% of the owners buy it.

Especially with headers, ive seen tons of people buy it and then decide to sell vs installing or put off on installing it for a while waiting for an opportunity.

But ive seen the results of this multiple times and they definitely do produce power consistently.

2sl0w · 05-06-2014, 07:26 PM

Z1 just hit 346 with the shop car last Saturday at the ZAtlanta dyno day. A Nismo hit 335 with the same headers and tomei single as well.

Sent from my Nexus 5 using Tapatalk

brucelidat · 05-06-2014, 07:29 PM

I'll give them a call and see if they still have any plans to make these fit the 370 cats

John@Z1 · 05-07-2014, 08:57 AM

At the moment do to very high estimates the VHR flange version has been put on the back burner. Also sales on these headers are way more than expected due to increased performance. So far the highest we have hit on our dyno with the Z1 shop car is 356rwhp and 284tq. If other shops aren't making numbers they need to dig into the tune a little better.

brucelidat · 05-07-2014, 02:08 PM

If I trade my Fast Intentions 370 resonated HFCs for their vq35de res HFCs, these headers should bolt up fine with just your gaskets right?

DEpointfive0 · 05-07-2014, 06:07 PM

Quote:

Originally Posted by brucelidat

If I trade my Fast Intentions 370 resonated HFCs for their vq35de res HFCs, these headers should bolt up fine with just your gaskets right?

The gaskets from the VQ37 isn't the same as the VQ35DE

brucelidat · 05-07-2014, 06:33 PM

Z1 has gaskets with the headers to work with vq35de cats on the 370. If I had vq35de resonated HFCs from fast intentions, then it should work right?

John@Z1 · 05-08-2014, 11:56 AM

Quote:

Originally Posted by brucelidat

Z1 has gaskets with the headers to work with vq35de cats on the 370. If I had vq35de resonated HFCs from fast intentions, then it should work right?

That's correct!

05-06-2014, 06:00 PM	#1 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	judging by the death of this thread, i am assuming people's expectations were not met with these headers, sales dropped off, and there will be no version that mates up with the 370 cats? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-06-2014, 06:10 PM	#2 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 14	These headers are still setting records for na power. They never really made an official thread .. I would assume they are still selling well. As far as hr/vhr flanges... That is provably best left for z1 to answer. Sent from my Nexus 5 using Tapatalk __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, 2pc Rotors, SP Diff 3.54 FD, Clutch + LW FW + CSC Del \|\| ECUtek e85 w/600cc injectors \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|

05-06-2014, 07:24 PM	#4 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	This thread was so hot though, that I assumed there were forum member show ordered it. Haven;'t heard any comments from them though. There was the one guy how was super unhappy, but not too many guys coming in and saying they got good results other than the original couple of guys installed and tuned at z1. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-06-2014, 07:26 PM	#6 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 14	Z1 just hit 346 with the shop car last Saturday at the ZAtlanta dyno day. A Nismo hit 335 with the same headers and tomei single as well. Sent from my Nexus 5 using Tapatalk __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, 2pc Rotors, SP Diff 3.54 FD, Clutch + LW FW + CSC Del \|\| ECUtek e85 w/600cc injectors \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|

05-06-2014, 07:29 PM	#7 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	I'll give them a call and see if they still have any plans to make these fit the 370 cats __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-07-2014, 08:57 AM	#8 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 21	At the moment do to very high estimates the VHR flange version has been put on the back burner. Also sales on these headers are way more than expected due to increased performance. So far the highest we have hit on our dyno with the Z1 shop car is 356rwhp and 284tq. If other shops aren't making numbers they need to dig into the tune a little better. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

05-07-2014, 02:08 PM	#9 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	If I trade my Fast Intentions 370 resonated HFCs for their vq35de res HFCs, these headers should bolt up fine with just your gaskets right? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq Last edited by brucelidat; 05-07-2014 at 02:12 PM.

05-07-2014, 06:33 PM	#11 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Z1 has gaskets with the headers to work with vq35de cats on the 370. If I had vq35de resonated HFCs from fast intentions, then it should work right? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 12:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 10:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 07:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 12:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 05:36 PM