Fast Intentions exhaust is here!

tjlazer · 02-09-2011, 04:57 PM

Well kinda bummed! I scrapped my exhaust today going over a stupid speed bump! It wasn't even a big one from what I could tell, but I kinda rolled over it at a slight angle which was not good. I usually CRAWL over them but since this one seemed smaller I just drove over it slowly and at an angle and the cans scrapped a little. Not bad but still some scrapes. Anything that can be done to fix this or just leave it alone? BTW I have a 1" drop on swifts.

XwChriswX · 02-09-2011, 04:59 PM

Quote:

Originally Posted by tjlazer

Well kinda bummed! I scrapped my exhaust today going over a stupid speed bump! It wasn't even a big one from what I could tell, but I kinda rolled over it at a slight angle which was not good. I usually CRAWL over them but since this one seemed smaller I just drove over it slowly and at an angle and the cans scrapped a little. Not bad but still some scrapes. Anything that can be done to fix this or just leave it alone? BTW I have a 1" drop on swifts.

You might be able to buff out some of the marks with an abrasive rubbing compound, and maybe smooth it out as long as they aren't too deep.

Vegitto-kun · 02-10-2011, 05:26 PM

After a hour of rubbing and cleaning I finally did it my CBE is clean again

F.I. Inc. · 02-10-2011, 05:38 PM

Quote:

Originally Posted by Vegitto-kun

After a hour of rubbing and cleaning I finally did it my CBE is clean again

Well look at that! The system looks brand new.

XwChriswX · 02-10-2011, 05:39 PM

Looks really close to your bumper...

Vegitto-kun · 02-10-2011, 05:44 PM

used some rim cleaner I used before and used those rough sponge thingies, rough but not rough enough to scratch up the exhaust.

those + a hour of spray product, scrub and rinse

XwChriswX · 02-10-2011, 05:47 PM

Quote:

Originally Posted by Vegitto-kun

used some rim cleaner I used before and used those rough sponge thingies, rough but not rough enough to scratch up the exhaust.

those + a hour of spray product, scrub and rinse

Br0... look into this stuff. Takes 20 mins...

Mothers® Mag & Aluminum Polish

xdeslitx · 02-10-2011, 05:51 PM

Quote:

Originally Posted by XwChriswX

Br0... look into this stuff. Takes 20 mins...

Mothers® Mag & Aluminum Polish

that's what i use...per trip's recommendation
works real well

XwChriswX · 02-10-2011, 05:53 PM

Quote:

Originally Posted by xdeslitx

that's what i use...per trip's recommendation
works real well

Same here, works wonders and now I use it myself.

Vegitto-kun · 02-10-2011, 05:53 PM

Quote:

Originally Posted by XwChriswX

Br0... look into this stuff. Takes 20 mins...

Mothers® Mag & Aluminum Polish

they don't sell that here, I said that before.

also yeah the exhaust if pretty close to the bumper. but that is because of major problems when installing it, tom had to mod the hangers and **** since they didn't work. I dont know the details but he thinks there might be some difference between the american version and european.

which makes sense, hell when I ordered my amuse kit they asked if it was a japanese, american or european version saying there are differences.

XwChriswX · 02-10-2011, 05:55 PM

Quote:

Originally Posted by Vegitto-kun

they don't sell that here, I said that before.

also yeah the exhaust if pretty close to the bumper. but that is because of major problems when installing it, tom had to mod the hangers and **** since they didn't work. I dont know the details but he thinks there might be some difference between the american version and european.

which makes sense, hell when I ordered my amuse kit they asked if it was a japanese, american or european version saying there are differences.

Oh you did!? Oh snap, my bad br0. I must have missed that... Can you order it online and have it shipped to Belgium?

Vegitto-kun · 02-10-2011, 05:58 PM

Quote:

Originally Posted by XwChriswX

Oh you did!? Oh snap, my bad br0. I must have missed that... Can you order it online and have it shipped to Belgium?

well not from the mothers own site.

I remember some guy here offering to ship some here but I never heard from him again

XwChriswX · 02-10-2011, 06:08 PM

Quote:

Originally Posted by Vegitto-kun

well not from the mothers own site.

I remember some guy here offering to ship some here but I never heard from him again

Have you tried ordering it off of Amazon.. I know they ship everywhere lol

Vegitto-kun · 02-10-2011, 06:09 PM

Quote:

Originally Posted by XwChriswX

Have you tried ordering it off of Amazon.. I know they ship everywhere lol

lol I never bought anything from amazon

I keep on hearing about it but never went on the site.

XwChriswX · 02-10-2011, 06:10 PM

Quote:

Originally Posted by Vegitto-kun

lol I never bought anything from amazing

I keep on hearing about it but never went on the site.

Amazon.com: Mothers 5100 Mag & Aluminum Polish Paste - 5 oz: Automotive

Order it, use it, love it.

02-09-2011, 04:57 PM	#5356 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Well kinda bummed! I scrapped my exhaust today going over a stupid speed bump! It wasn't even a big one from what I could tell, but I kinda rolled over it at a slight angle which was not good. I usually CRAWL over them but since this one seemed smaller I just drove over it slowly and at an angle and the cans scrapped a little. Not bad but still some scrapes. Anything that can be done to fix this or just leave it alone? BTW I have a 1" drop on swifts. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

02-10-2011, 05:39 PM	#5360 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Looks really close to your bumper... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

02-10-2011, 05:26 PM	#5358 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	After a hour of rubbing and cleaning I finally did it my CBE is clean again

02-10-2011, 05:44 PM	#5361 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	used some rim cleaner I used before and used those rough sponge thingies, rough but not rough enough to scratch up the exhaust. those + a hour of spray product, scrub and rinse