Are you serious - it's only 3/8" lower than the lowest point of the stock exhaust, and the lowest point on the FI exhaust?

If so :shakes head: - I'm an asshat, and I apologize for busting balls over this.

Yeah, it really isn't a concern at all.

hey mustang, is your Z dropped?

Nope.

No apology needed, and I have measured it one more than one car just to compare. The lowest point of the stock system is the tubes leading up to the rear muffler. As for ours it is the front of the mufflers themselves. They give the appearance that they are so much lower because you see so much of them. They stand out quite a bit more.

Tony, I was looking at possibly buying a supercharger, but I heard that since your exhaust has 2.5 inch piping, it would not be a good choice if considering a S/C. Any inputs you could add would be great. Any info on how the header is coming along? And I'm almost ready to order the exhaust :)

^^ info on the long tube headers please ;)

2.5" for an S/C setup is ideal.

3.0" is typically what you want for a TT setup, but a 2.5" would be fine up to 400-450 rwhp.

^Thanks alot for responding to both of my threads, it looks like I'll be the next to order the exhaust - 18" CF Exhaust

2.5" will be more than enough to about 525-550 RWH. Now, you can make more with the 2.5" but it becomes restrictive at that point. You have to be careful in regaurds to a S/C with the exhaust. Bigger is not always better. The supercharger will need back pressure unlike turbos which need no back pressure but trust me when I tell you this, our exhaust with a supercharger will outperform any other 2.5" cat back on the market.

I would bet the farm on it.

Are you saying that you are going to be #42? When your ready, we are here...

Thanks, Tony

I do not have any info to give you yet.

Can u pm me your number? My name is Jon, so u know who I am when I call, I figured this will be my first mod since it is better then the stock unit, adds power/sound, and is 20lbs lighter. If I ordered this week, what would the wait be to recieve it? (18" CF Exhaust)

mmmmmm 8 days :)

That's what we are here for :tup:

I think I'm sold again - lol!

Has anyone ran these with a G3 intake and compared with HFC's and not with HFC's?

I noticed there about a 5HP gain (RWHP) between HFC's and Resonated Test Pipes, so I'm curious if there might be a limit on the intake side, where the G3's would resolve that, and produce even more HP with HFC's (or resonated test pipes) - sort of highlighting the different in restriction between the two?

Jon,

Our number is: (818) 882-2788

Ask for Tony

If you are sold and ready, lets do it.

(818) 882-2788

Thanks, Tony

You are exactly correct. We have tapped into so much power with the full exhaust that it reaches a wall or plateau with the stock intakes. Now, replace those with a better intake and you will allow the resonated test pipes or HFC's to a more efficient job!

The bottom line is, the more (cold) air you cram into your engine and the more efficient you can let the exhaust out, the more torque and power you will make!

i cant wait to drive home from the shop next Saturday after i get my FI CBE 18" Resonators and G3 Intakes installed!

will be a fun drive for sure!

^^ how many days man!!!

7 days @ midnight!

:leghump:

Ur counting down for both of us, bro! I've been waiting for this moment for so long and it's so surreal that I've yet to schedule my install. But I think I'm going to do it tomorrow and schedule my install for the 10th as well!! :happydance:

See you in about a week! :drool:

yeah eric, i BEEN scheduled my install @ VTR at 10am October 10th! lol! i hope to see you there broski! be easyyyyyyyyyy!

TONY, thanks again for this very sexual exhaust :tup:

You guys are little kids in a candy shop.

and the candy are delish.

How long will it take to recieve an exhaust If I order this week?

3-4 weeks

woot woot!
hey TONY if you see this,
THE MONEY'S IN THE BIZZZANK! lol

waiting for 1.4g's to be deducted today ;)

ship today ship today ship today ship today :D :D :D :D :D

It is shipping today...

And I guess that means mine will also be shipping today!!!!!!!!!!! :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl: :happydance: :bowrofl:

Hey Tony,

How long you think shipping will take cross-country?

^^^ Looks like this guy might need new pants...

we'll get it the earliest on Thursday & Friday the latest :)

omgomgomgomgomgomgomgogmogmogmogmogmogmogmogmogmgo mgomgomgomgomgomgomg

:happydance::happydance::happydance::happydance:
:tup::tup::tup::tup:
:excited::excited::excited::excited:
:driving::driving::driving::driving:
:D:D:D:D:D:D:D:D:D:D:D:D
:):):):):):):):)

Hell yah man. I'm happy u got your shipping out. That means I'm Really close to gettn mine! Waiting for that call so I can pay the rest of my balance in full!!!

:tup::tup::tup:

hey dude, i see your license plate.
you trying to say "kantot me" ?

haha you filipino broski?

Hey Daine,

I set up my install with VTR today for Saturday at 9am. See you then, b!