whew..

just be careful bro...

dont want to see you on the 6 oclock news squashed under a z...:tup:

look forward to your review...

Tell me about it. I'm fully prepared to stop and take it somewhere if I don't think I can safely do it.

I will probably do it on two stands. I've never put a car on 4 before and don't really want to practice now! Two stands up front will take care of the HFCs and the front half of the CBE. I'll put the rear up to put the mufflers on. Should be OK!

in for results :tup:

goodluck with the install mustang ;)

BTW, kdo, you know how it is with the SN95 installs... tails go up over the axle so you have to get under there with a sawzall. :)

cant remember if i had to cut it out or not... i think i did...i did throw it away though when i put the slp on, i definately rememebr using a lift...

i used a lift this time too and i would recommend any one wanting to swap cbe out use one...it makes it so much easier and you can knock out the oil change at the same time...

Yeah, I mean, I would, but there are no places around here to do it. And I don't have my military ID anymore so I don't think I can get on base to use theirs.

fort eustis?

here you dont need a military id to get on post anymore

Ft. Belvoir and Quantico are the two nearest.

ah..have you been to their mwr websites to see if they have a sprockets or something like it?

Lift bay fee $5.50 per hour

Fort Belvoir MWR Arts & Crafts

< still trying to figure this out. The exhaust replaces the cats, but the headers they are developing will also replace the cats? :confused:

no...the exhaust replace everything from the cats to the exhaust tips...

the headers will replace the manifolds and cats...

Which completely makes sense. I guess what was throwing me off is that a HFC price was being listed in the first post as if it somehow came with the system.

Can some of the 'new' recipients of their exhausts post some new vids? Thanks.

frost,

there's 3 pieces to the puzzle

Headers >> HFC/Test Pipes >> Catback

also, Longtubes = Headers and test pipes in one piece

these long tube headers that FI is comming out with in late October - November is the reason why i didnt get HFC's :tup:

sweet 16

I'll have mine up this weekend. Exhaust comes in tomorrow (according to tracking # it's one state over right now, ugh, so close!)

I purchased the 18" resonators and HFC's. I'm looking to do videos of both, possibly. Without a doubt I will do videos of the end result, but I haven't decided if I want to just install all at once (easiest) or to install just the exhaust, drive for a few days and add the HFC's over the weekend.

Regardless, plenty of new pictures and a video or two will be coming in the next few days. :tup:

I'd love to hear it with 18" resonators WITHOUT the HFCs if it's not too much trouble for you. Another member said he actually preferred the sounds without HFCs and was considering taking them back off. Either way though, vids would be much appreciated.

I *might* be installing both separatly so theres a chance I might do videos of both. Will be doing the work this saturday.

Adakja1: Thank you for the order,

Digitonium: 001 (Installed)
Tonmed123: 002 (Installed)
Import111: 003 (Installed)
Zat Zuma: 004 (Installed)
Dszombiex: 005 (Installed)
FuszNissan: 006 (Installed)
Crbn_Fbr: 007 (Installed)
Phelan: 008 (Installed)
Kolya: 009 (Installed)
GMZ: 010 (Installed)
Wstar: 011 (Installed)
Zigmon: 012 (Installed)
Drisko: 013 - (Installed)
Jason S: 014 (Delivered)
Daishi: 015 (Installed)
Kdomilger: 016 (Installed)
B1nks: 017 (Installed)
MrBMW: 018 (Delivered)
MrBMW: 019 (Delivered)
MrBMW: 020 (Delivered)
MacDaddy: 021 (In Transit)
Sonic370Z: 022 (In Transit)
m4a1mustang: 023 (In Transit)
Seeyabud86: 024 (Shipping tomorrow/Friday)
Overzlus: 025 (Shipping tomorrow/Friday)
G35Guy84: 026 (Shipping Monday/Tuesday)
Argen G (Non Forum Member): 027 (Install late October)
Pointman: 028
Racerxj17: 029
Dainedazz: 030
Jerkey: 031
Caleb B (Non Forum Member): 032
Devious Z: 033
Nick B (Non Forum Member-England): 034
DunW/4Bangerz: 035
David L (Non Forum Member): 036
Cgmobile370Z: 037
Knives: 038
Abakja1: 039

Getting real close to #40!!!

i think you have a few more years before you need to worry about hitting 40 :tup:

:iagree:

Nice Exhaust. SOUNDS GREAT :tup:.

I'm interested in the long tube headers. Hope to see results soon.

Good luck.

The long tubes are gonna throw CEL's thought right? Since there's no cat?

I would like to 2nd this, gotta keep those RED Z's about:tup:

I wish we had something similar to this. It does seem like there is an abundance of similar type setups for you guys. I would so love to do the Exhaust install myself if i had access to this.

Not long now:excited::excited::excited:

suppose to be using bungs so it doesnt throw CELs...no way to know for sure until they actually start testing the prototype...and that isnt hapening until they build the prototype...

tomorrow right MrBMW?

Yeah but even headers with bungs still manage to throw CEL's, mine does right now on my tC as well... But while its in the shop this Friday at Intense, I'mma try the steel wool IN the bung trick and see if that helps at all...

i hope Tony works his magic and makes a solution for this. i hate seeing CELs.

it will

All going well with the Customs papers today, they are meant to be delivered to my Wifes work today (while i DAMN sleeping), so tomorrow is the biz. I so hate waiting.....

Seriously, I need to clear mine... Without the port plug things, is it the positive or the neg termnial I need to remove, I can never remember which one...

omgomgomgomgomgomg

We are going to do everything in our power to keep the CEL light from coming on. I have a few tricks up my sleeve that I am confident will work. No one knows what will happen for sure until the headers are prototyped!

Soon my friends, soon!

work your magic Tony! goodluck :tup:

That's EXACTLY the way I feel!!!!!!!

:happydance: :happydance: :happydance: :happydance: :happydance: :happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:
:happydance: :happydance: :happydance: :happydance: :happydance:

Now I have to go and change my underwear. :leghump:

Yes Sir ^^ we are next Eric! cant wait!

15!

Delivery Date / Time: 24-September-2009 / 10:58 AM
Driver Release Location: GARAGE

ill stop by and pick it up for ya :tup: