:bowrofl: lmmfao on that one...

looks like they're set on it...

FI please send me a pm asap on any info u have on this...i would like it ordered asap!

Just in case anybody hasn't seen this...

ya, seen it awhile back :happydance:


i had to remanence though and turned my computer all the way up :tup:

the last part where he is almost a half mile away is truely priceless!

100% for the prototype. Beyond that we shall see. First and foremost it will come to how they perform as well as sound!

Thanks man!

Hey hey hey, get in line.

Yeah, but that has a 3.5" single race pipe which helps make it so loud.

haha now im gonna have to scratch the f.i. exhaust with 12in resonators along with there hfc's, and consider doing the long tube headers with the f.i. exhaust with the 18inch resonator setup!! (sigh) decisions, decisions.......:rofl2:

Ok dumb question, but what happens with the 02 sensors when you go with long tube headers. Is there any way around CEL with this kind of setup?

Considering I have had two different test pipes on my car, my guess would be YES!

If they put that 'L' shaped bung on it, I think there is a good shot to keep the CEL quiet.

I mean I had pure test pipes and resonated test pipes and both had that design and I had no CEL. (pure test pipes thru a CEL for the first 50 miles and never appeared again for the 2k I put on them afterwards.)

Unless distance creates a problem?

Here is a picture from Kolya's install yesterday...

http://i371.photobucket.com/albums/o...s/IMG_5128.jpg

Yeah, I thought about mentioning that. I more or less wanted people to get a feel for what they look like.

Is that the stainless steel or carbon fiber exhaust, 12"?

Stainless steel. The only part of the exhaust that is carbon fiber is the sleeve of the muffler, which its not in this case.

will the FI high flow cats throw a CEL?

No CEL yet here :tup:

Ok stop with the pics already! This kit looks BA, and I want it now! lol Just no car to put it on hahaha.

Thanks for that Pic' Tony. It gives a good idea of what the CF's will look like for us that will get them (yes they are Stainless above). Will show up nicely i think against my Chicane Yellow:tup:.

I suppose the cats out of the bag about the Long Tubes, hopefully there's a work around our Steering Rack (on the Correct side:stirthepot:).

PS Love that Long Tube Vid above, that is nuts LOL.

If anyone is worried about ground clearance, dont be. Got mine installed last night. My car is dropped on BC racing coilovers and I have gone over some rough stuff and have not heard a scrape. Will be a while before I can get Vids and pics. the shop cold not get one of the bolts on the stock cats off so I am running 1 Berk HFC and 1 stock cat right now, lol. When ever I have the time to get my car back to the shop so they can finish the job, then I will get to pics and vids.

Wonder what your ecu will think of that setup.

omg that's sex right there~!

is there a new updated list? whens number 15 shipping lmao.

Hey Tony, are u going to make a new thread similar to this one, for the long tube headers with pics/dyno/review?

Yes, we are and we are hoping to have the prototype completed within a few months or so. I will keep everyone posted as the details unfold.

We are working away here. I appreciate everyones patience. #04 and 05 should be in the mail tomorrow.

^awesome, i'll be outta town till the 16th, but when I get back I'm going to call you about ordering the exhaust. I plan on getting the 18" since I want to buy the longtube headers and don't want it to be annoying/ricer loud. Do u think that will be a good set-up sound & power wise?

Come in lucky number 7!:) I'm sure it's worth the wait!

Got the other Berk HFC installed yesterday. Sounds better inside the car. I still need to hear it outside the car. I was under the car last night and it looks like something has scraped the mufflers. Not sure when or where. I will keep an eye on it and see if it gets worse.

^^Take some pics, of the exhaust set up not the scraps.

Uh oh....

I talked to Import111 and I think it is safe to say it most likely happened on his driveway where there is a very steep Apex.

Udated List as of today:

Digtonium: 001 - Pre ordered since April (In transit)
Tonmed123: 002 (In transit)
Import111: 003 (Installed)
Zat Zuma: 004 (Shipping 8/7/09)
Dszombiex: 005 - Installation July 30th (Installed)
FuszNissan: 006 (Shipping 8/7/09)
Crbn_Fbr: 007 (Building)
Phelan: 008
Kolya: 009 - Installation August 3rd (Installed)
GMZ: 010
Wstar: 011
Zigmon: 012 - Installation August 7th
Drisko: 013 - Installation August 14th
Jason S: 014
Daishi: 015
HelloGoodbye: 016
Kdomilger: 017
B1nks: 018
MrBMW: 019
MrBMW: 020
MrBMW: 021
MacDaddy: 022


__________________

So what's the wait now? A month or so?

:excited:

Getting close! Hope all this rain lets up when it gets here

ha, damn! look at all those orders! nice! I knew I should have ordered mine back when I first had the chance. :p

Hey Tony, any chance that you can build me one and I can drive to Cali in the next 2 or 3 weeks for an install and "cut line"?? *wink wink nudge* :D


let me know when it gets here, I can't wait to check it out.
- fellow 1 of 3 pearl white 370Z's in Lexington, KY :tiphat:

wstar, you mod whore...

About a month but I just got another order so by the end of this week we could be looking at 5 weeks or so!

Tony, the package arrived yesterday. I couldn't wait to take a peek... my first ever aftermarket exhaust!!! WahoO! Hopefully I'll get it installed tomorrow. I'll get some vids loaded next week or so.