Fast Intentions exhaust is here!

kevin1985912 · 03-03-2010, 03:03 PM

Quote:

Originally Posted by F.I. Inc.

Be here at 8:30 a.m. Saturday the 6th of March!

I will try to be there at 830, that means i have to leave at 6 since i'm driving up from SD. can we do like 9 or 10?

F.I. Inc. · 03-03-2010, 04:08 PM

Quote:

Originally Posted by kevin1985912

I will try to be there at 830, that means i have to leave at 6 since i'm driving up from SD. can we do like 9 or 10?

I have another customer coming in @ 10:30. The latest we can make your appointment is 9 a.m. sharp. Let me know if you can make it...

Tony

schrute · 03-03-2010, 10:35 PM

It will be worth getting up early for - trust me!

kevin1985912 · 03-04-2010, 01:43 AM

Quote:

Originally Posted by schrute

It will be worth getting up early for - trust me!

Gonna find a good excuse for my girlfriend for getting up at 6 in the morning on Saturday~

Slynky · 03-04-2010, 06:36 AM

Quote:

Originally Posted by kevin1985912

Gonna find a good excuse for my girlfriend for getting up at 6 in the morning on Saturday~

Hehe why not... :censored:

bejan · 03-03-2010, 10:39 PM

Tony is the man!

schrute · 03-04-2010, 02:02 AM

Take her shoe shopping after.

I know that would work with my wife.

pbpd4816 · 03-04-2010, 11:25 AM

Just got the non-resonated test pipes and non-resonated cat back installed. My God its loud and I love it! The mechanic that done the install was impressed with the welds and the attention to detail like polishing the welds down smooth just inside the flanges. Impressed! Money well spent! Now I need to get an oil cooler because I can tell I will be driving it harder than ever. My oil temp got just a bit past 260 earlier for the first time and its only 50 degrees outside and I'm sure it will only get worse as it gets warmer.

F.I. Inc. · 03-04-2010, 06:34 PM

Quote:

Originally Posted by pbpd4816

Just got the non-resonated test pipes and non-resonated cat back installed. My God its loud and I love it! The mechanic that done the install was impressed with the welds and the attention to detail like polishing the welds down smooth just inside the flanges. Impressed! Money well spent! Now I need to get an oil cooler because I can tell I will be driving it harder than ever. My oil temp got just a bit past 260 earlier for the first time and its only 50 degrees outside and I'm sure it will only get worse as it gets warmer.

I am glad that you got it and I am glad that you are satisfied! Do not hesitate to call me if you need anything...

Thank you, Tony

6spd · 03-04-2010, 03:02 PM

Mine was just delivered this morning. I am gonna go back to work tonight and install it!

F.I. Inc. · 03-04-2010, 06:36 PM

Quote:

Originally Posted by 6spd

Mine was just delivered this morning. I am gonna go back to work tonight and install it!

Keep us posted!

Rssundar · 03-04-2010, 07:00 PM

Yo Tony any update on my exhaust?? #89... Can't wait mannnnn

6spd · 03-04-2010, 09:56 PM

I just installed mine! Wow, what an amazing piece I must say. The workmanship is the best I've ever seen, and I've seen a ****-ton of exhausts. I had high expectations for this exhaust after talking to Tony and reading things here on the boards. This met my expectations for sure and is exactly what I was looking for. I was "-" <this close to buying a nismo exhaust, what at the time I expected to suit me best, but I couldn't go through with it knowing what high quality this FI exhaust is. Sounds just like everyone else explains, install was cake, and the finish is spectacular. Highly recommended! Thank you Tony for putting such great effort into this product. It shows that people still do care about the quality of the product/service they provide!

BTW, if you need to shim the hanger bracket, shim only the two inner bolts and not the outer. Tighten the two inners down and then gradually tighten the outer bolt and it will raise or lower the tip, allowing for better aligning. This way uses leverage to fine tune the position.

Rssundar · 03-05-2010, 08:35 AM

Quote:

Originally Posted by 6spd

I just installed mine! Wow, what an amazing piece I must say. The workmanship is the best I've ever seen, and I've seen a ****-ton of exhausts. I had high expectations for this exhaust after talking to Tony and reading things here on the boards. This met my expectations for sure and is exactly what I was looking for. I was "-" <this close to buying a nismo exhaust, what at the time I expected to suit me best, but I couldn't go through with it knowing what high quality this FI exhaust is. Sounds just like everyone else explains, install was cake, and the finish is spectacular. Highly recommended! Thank you Tony for putting such great effort into this product. It shows that people still do care about the quality of the product/service they provide!

BTW, if you need to shim the hanger bracket, shim only the two inner bolts and not the outer. Tighten the two inners down and then gradually tighten the outer bolt and it will raise or lower the tip, allowing for better aligning. This way uses leverage to fine tune the position.

Awesome...Good luck bro

F.I. Inc. · 03-05-2010, 01:29 PM

Quote:

Originally Posted by 6spd

I just installed mine! Wow, what an amazing piece I must say. The workmanship is the best I've ever seen, and I've seen a ****-ton of exhausts. I had high expectations for this exhaust after talking to Tony and reading things here on the boards. This met my expectations for sure and is exactly what I was looking for. I was "-" <this close to buying a nismo exhaust, what at the time I expected to suit me best, but I couldn't go through with it knowing what high quality this FI exhaust is. Sounds just like everyone else explains, install was cake, and the finish is spectacular. Highly recommended! Thank you Tony for putting such great effort into this product. It shows that people still do care about the quality of the product/service they provide!

BTW, if you need to shim the hanger bracket, shim only the two inner bolts and not the outer. Tighten the two inners down and then gradually tighten the outer bolt and it will raise or lower the tip, allowing for better aligning. This way uses leverage to fine tune the position.

All is well that ends well, right!

I am pleased to hear that it is installed and rolling smooth. As I always say, it is nice to see another satisfied customer. Do not hesitate to ask if you need anything...

Thanks, Tony

03-03-2010, 10:35 PM	#3 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 18	It will be worth getting up early for - trust me! __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

03-04-2010, 02:02 AM	#7 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 18	Take her shoe shopping after. I know that would work with my wife. __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

03-04-2010, 03:02 PM	#10 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 26	Mine was just delivered this morning. I am gonna go back to work tonight and install it! __________________ -Jay- jonathanjamesphotographer.com

03-04-2010, 07:00 PM	#12 (permalink)
Rssundar Base Member Join Date: Aug 2009 Location: NH Posts: 22 Drives: 2009 370Z black 6spd Rep Power: 17	Yo Tony any update on my exhaust?? #89... Can't wait mannnnn Last edited by Rssundar; 03-04-2010 at 07:31 PM.

03-04-2010, 09:56 PM	#13 (permalink)
6spd A True Z Fanatic Join Date: Aug 2009 Location: South Florida Posts: 3,001 Drives: Q50RS Rep Power: 26	I just installed mine! Wow, what an amazing piece I must say. The workmanship is the best I've ever seen, and I've seen a **-ton of exhausts. I had high expectations for this exhaust after talking to Tony and reading things here on the boards. This met my expectations for sure and is exactly what I was looking for. I was "-" <this close to buying a nismo exhaust, what at the time I expected to suit me best, but I couldn't go through with it knowing what high quality this FI exhaust is. Sounds just like everyone else explains, install was cake, and the finish is spectacular. Highly recommended! Thank you Tony for putting such great effort into this product. It shows that people still do care about the quality of the product/service they provide! BTW, if you need to shim the hanger bracket, shim only the two inner bolts and not the outer. Tighten the two inners down and then gradually tighten the outer bolt and it will raise or lower the tip, allowing for better aligning. This way uses leverage to fine tune the position. __________________ -Jay-** jonathanjamesphotographer.com

03-03-2010, 10:39 PM	#6 (permalink)
bejan Base Member Join Date: Feb 2010 Location: Chatsworth, CA Posts: 70 Drives: 09 Nissan 370Z PW M6 Rep Power: 16	Tony is the man!

03-04-2010, 11:25 AM	#8 (permalink)
pbpd4816 Base Member Join Date: Sep 2009 Location: Pine Bluff, Arkansas Posts: 103 Drives: 09 370z B+S 6MT Blk Rep Power: 16	Just got the non-resonated test pipes and non-resonated cat back installed. My God its loud and I love it! The mechanic that done the install was impressed with the welds and the attention to detail like polishing the welds down smooth just inside the flanges. Impressed! Money well spent! Now I need to get an oil cooler because I can tell I will be driving it harder than ever. My oil temp got just a bit past 260 earlier for the first time and its only 50 degrees outside and I'm sure it will only get worse as it gets warmer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM