heat wrapping intakes?

edub370 · 10-02-2012, 01:52 PM

anyone have the torque app for their andriod that can display air inlet temps (maybe i can use my laptop and uprev?) to see if this would have any real world benefit

SouthArk370Z · 10-02-2012, 02:07 PM

Quote:

Originally Posted by edub370

anyone have the torque app for their andriod that can display air inlet temps (maybe i can use my laptop and uprev?) to see if this would have any real world benefit

I'm not familiar with the UpRev software, but Inlet Air Temp (IAT) is part of the standard data that most cars have available. If IAT display is not a standard option in UpRev, let me know and I can provide the PID and scaling for manual configuration (assuming UpRev allows such).

-Edit-
Mode: 01
PID: 0F
Data: 1 hex byte
Data Range: 0-255 (dec)
Data Units: degrees C
Scaling: data - 40

edub370 · 10-02-2012, 02:17 PM

Quote:

Originally Posted by SouthArk370Z

I'm not familiar with the UpRev software, but Inlet Air Temp (IAT) is part of the standard data that most cars have available. If IAT display is not a standard option in UpRev, let me know and I can provide the PID and scaling for manual configuration (assuming UpRev allows such).

Not sure what all this means. i'm more confused than a chameleon in a bag of skittles.

SouthArk370Z · 10-09-2012, 10:54 PM

Quote:

Originally Posted by edub370

Not sure what all this means. i'm more confused than a chameleon in a bag of skittles.

If you are using OBD/CAN monitoring (eg, UpRev, ScanGaugeII), the Intake Air Temperature is readily available. I would guess that most software will have IAT as a pre-configured item (pick from a list) for monitoring. The few apps I have played with all had it pre-configd. If it is not pre-configd, you may be able to use the Mode/PID info to manually set it up.

Zoren 370 · 04-21-2018, 10:24 AM

I miss the people in this thread most of them are gone!

DepointfiveO where are you buddy? :-(

Nut_N_Much · 04-24-2018, 05:21 PM

Always heat wrap my intakes and test pipes.. Heat saturation is so bad in the engine compartment.

10-02-2012, 01:52 PM	#1 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 21	anyone have the torque app for their andriod that can display air inlet temps (maybe i can use my laptop and uprev?) to see if this would have any real world benefit __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

04-21-2018, 10:24 AM	#5 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	I miss the people in this thread most of them are gone! DepointfiveO where are you buddy? :-( God-Speed, SouthArk370Z, JARblue and 1 others like this.

04-24-2018, 05:21 PM	#6 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Always heat wrap my intakes and test pipes.. Heat saturation is so bad in the engine compartment. Punisher00 likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Wrapping Your Key Fob	SgtGoldy	DIY Section (Do-It-Yourself)	8	12-12-2012 02:18 AM
Wrapping HFC's	chuck62290	Intake/Exhaust	0	07-30-2011 10:30 AM
Wrapping a car....yourself?	Amuse370z	Exterior & Interior	7	07-07-2011 03:43 PM
Opinion on Heat Wrapping	V8Killer	Intake/Exhaust	5	07-03-2011 06:09 AM
Q. Which heat wrap should I use for rather than the heat shield?	Click	Intake/Exhaust	4	07-15-2010 11:13 AM