heat shield near muffler

Notsud 13 · 10-01-2012, 07:24 PM

quick question, hopefully i can get a quick reply. we're putting ont he greddy right now, but theres this black box that sits where the right muffler needs to be. does that part come off?

thanks

Sent from my DROID4 using Tapatalk 2

864Zbeast · 10-01-2012, 07:32 PM

Yes I ran into same issue and yes you can take it off as long as you feel comfortable doing so. Mine has been off for months and its fine.

Notsud 13 · 10-01-2012, 07:48 PM

yea i just wasnt sure what the wires in that area were for. as long as its not fuel lines then i should be fine. i have about a finger gap between the wires and muffler.

Sent from my DROID4 using Tapatalk 2

DarkJak · 10-01-2012, 08:26 PM

I had to take mine off for my exhaust too. I think it was just 3 bolts to secure it. Been running just fine so far for about a month.

370Z Purist · 10-01-2012, 09:12 PM

That so called black box which you guys are sure is not a fuel component is actually the evap canister... for managing evaporated fuel...

That said, unless you're FI, you probably don't need to reconstruct the shield for it.

Waiz · 10-02-2012, 12:20 AM

What version Greddy are you referring to, did your kit not come with an EVAP relocation kit?

Notsud 13 · 10-02-2012, 01:18 AM

I have the greedy ti-c. Bought it from a member here and it didn't come with an evap relocation kit.

Sent from my Nexus 7 using Tapatalk 2

Waiz · 10-03-2012, 04:53 PM

Quote:

Originally Posted by Notsud 13

I have the greedy ti-c. Bought it from a member here and it didn't come with an evap relocation kit.

Sent from my Nexus 7 using Tapatalk 2

Have a shop fab you up a simple plate to relocate the Evap to where the heat shield is in the middle of the exhaust

Your other option is trying to order it directly from Greddy but they might not be able to find one for you

Notsud 13 · 10-03-2012, 06:00 PM

hey thanks for the suggestion. do i really need a shield there?

i might be changing out the exhaust so the shield might go back on.

Sent from my DROID4 using Tapatalk 2

Waiz · 10-03-2012, 06:37 PM

Quote:

Originally Posted by Notsud 13

hey thanks for the suggestion. do i really need a shield there?

i might be changing out the exhaust so the shield might go back on.

Sent from my DROID4 using Tapatalk 2

Totally not necessary if you're not using the OEM exhaust, I removed mine years ago!

Notsud 13 · 10-03-2012, 06:44 PM

awesome, thank you. +1!

Sent from my DROID4 using Tapatalk 2

Notsud 13 · 10-03-2012, 06:45 PM

+1 once i get back into the office...cant do it from my phone lol...

Sent from my DROID4 using Tapatalk 2

Waiz · 10-03-2012, 06:46 PM

Quote:

Originally Posted by Notsud 13

+1 once i get back into the office...cant do it from my phone lol...

Sent from my DROID4 using Tapatalk 2

No problem, glad I could offer some insight

10-01-2012, 07:24 PM	#1 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	heat shield near muffler quick question, hopefully i can get a quick reply. we're putting ont he greddy right now, but theres this black box that sits where the right muffler needs to be. does that part come off? thanks Sent from my DROID4 using Tapatalk 2

10-01-2012, 07:32 PM	#2 (permalink)
864Zbeast Track Member Join Date: May 2011 Location: Walhalla/Clemson, SC Posts: 874 Drives: 09 BS 370z Rep Power: 14	Yes I ran into same issue and yes you can take it off as long as you feel comfortable doing so. Mine has been off for months and its fine. __________________ Avant Garde M310 gloss black/ Nitto Invo/ black fangs and rear diffuser/ gloss black roof/ tinted tail lights/ GT-R start button

10-01-2012, 09:12 PM	#5 (permalink)
370Z Purist A True Z Fanatic Join Date: Jun 2009 Location: Zion, Illinois Posts: 1,873 Drives: '09 370Z-T BS M6 Rep Power: 18	That so called black box which you guys are sure is not a fuel component is actually the evap canister... for managing evaporated fuel... That said, unless you're FI, you probably don't need to reconstruct the shield for it. azian likes this. __________________ -Phil "Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
heat shield or no heat shield	livethefunk	Engine & Drivetrain	3	09-29-2011 12:29 AM
Q. Which heat wrap should I use for rather than the heat shield?	Click	Intake/Exhaust	4	07-15-2010 11:13 AM
Heat Shield Part #?	kielbasa16	Intake/Exhaust	6	07-12-2010 10:33 AM
UVS100 Heat Shield	vivalaReagan	Parts for sale (Private Classifieds)	1	07-09-2010 11:08 PM
For Those w/ Venture-shield Installed	nyc370z	Exterior & Interior	11	03-13-2010 07:19 AM

10-01-2012, 07:48 PM	#3 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	yea i just wasnt sure what the wires in that area were for. as long as its not fuel lines then i should be fine. i have about a finger gap between the wires and muffler. Sent from my DROID4 using Tapatalk 2

10-01-2012, 08:26 PM	#4 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	I had to take mine off for my exhaust too. I think it was just 3 bolts to secure it. Been running just fine so far for about a month.

10-02-2012, 12:20 AM	#6 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	What version Greddy are you referring to, did your kit not come with an EVAP relocation kit?

10-02-2012, 01:18 AM	#7 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	I have the greedy ti-c. Bought it from a member here and it didn't come with an evap relocation kit. Sent from my Nexus 7 using Tapatalk 2

10-03-2012, 06:00 PM	#9 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	hey thanks for the suggestion. do i really need a shield there? i might be changing out the exhaust so the shield might go back on. Sent from my DROID4 using Tapatalk 2

10-03-2012, 06:44 PM	#11 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	awesome, thank you. +1! Sent from my DROID4 using Tapatalk 2

10-03-2012, 06:45 PM	#12 (permalink)
Notsud 13 Enthusiast Member Join Date: Oct 2011 Location: SoCal Posts: 353 Drives: '09 Nissan 370z Rep Power: 13	+1 once i get back into the office...cant do it from my phone lol... Sent from my DROID4 using Tapatalk 2