Which of these gaskets should i use? Installing XYZ Y-pipe

ben1620 · 07-10-2012, 07:53 PM

Im installing my XYZ y-pipe and im wondering which gasket i should use to connect to the cats.The one from the shop that put on my HFCs? or the one that motordyne sent me. Or both?

This first gasket(s) was installed with my HFCs about 2 weeks ago. The silver one is towards the rear. The multi-layered copper gasket is getting burned.

This is what motordyne sent me for the cat and midpipe connections. Are these supposed to be used in addition to other gaskets?

Lastly here is the old gasket from my stock Ypipe/midpipe connection. Looks toast

Thanks for any help as im halfway through my install.

ChrisSlicks · 07-10-2012, 08:12 PM

Use whichever one looks the most durable

But only use one.

The silvery colored dimpled ones burn up pretty quickly in my experience.

ben1620 · 07-10-2012, 08:15 PM

Quote:

Originally Posted by ChrisSlicks

Use whichever one looks the most durable

But only use one.

The silvery colored dimpled ones burn up pretty quickly in my experience.

Did the shop use 2 for some reason?

ben1620 · 07-10-2012, 08:24 PM

Also the motordyne gaskets are pliable.

m4a1mustang · 07-10-2012, 08:54 PM

Quote:

Originally Posted by ChrisSlicks

Use whichever one looks the most durable

But only use one.

The silvery colored dimpled ones burn up pretty quickly in my experience.

ChrisSlicks · 07-10-2012, 09:17 PM

Motordyne changed what they were using, the old ones were the silver colored dimpled ones and lasted a matter of days. You can try the new ones out and see if they work better. At least on the Y-pipe side of the cat the temperature is slightly lower than the header side.

ben1620 · 07-10-2012, 09:19 PM

Thanks again. I'm putting the MD gaskets on now. I'll update tomorrow.

Motordyne · 07-11-2012, 01:27 PM

Yes, just use the Motordyne gaskets. The other gaskets shown are the wrong size.

ben1620 · 07-11-2012, 02:29 PM

Quote:

Originally Posted by Motordyne

Yes, just use the Motordyne gaskets. The other gaskets shown are the wrong size.

My test run today was GREAT! The motordyne gaskets were a perfect fit and absolutely no leaks. I LOVE the XYZ. After replacing my stillen y-pipe the rattle or rasp that i was hearing in the stillen cats is gone. My wife didnt understand why i would spend the extra money until she heard it. It sounds awesome! I'll post some comparison vids when I get a chance.
Thanks to Chris Steve and Tony.

07-10-2012, 07:53 PM	#1 (permalink)
ben1620 Base Member Join Date: Sep 2011 Location: Arkansas Posts: 191 Drives: '05 Denali '09 370z Rep Power: 13	Which of these gaskets should i use? Installing XYZ Y-pipe Im installing my XYZ y-pipe and im wondering which gasket i should use to connect to the cats.The one from the shop that put on my HFCs? or the one that motordyne sent me. Or both? This first gasket(s) was installed with my HFCs about 2 weeks ago. The silver one is towards the rear. The multi-layered copper gasket is getting burned. This is what motordyne sent me for the cat and midpipe connections. Are these supposed to be used in addition to other gaskets? Lastly here is the old gasket from my stock Ypipe/midpipe connection. Looks toast Thanks for any help as im halfway through my install. __________________ 09 Black 7AT Sport, UpRev, Koni, Swift, Whiteline, Motordyne XYZ, Stillen HFC/Exhaust, Stillen 25 row, Pioneer, Infinity Last edited by ben1620; 07-10-2012 at 08:34 PM.

07-10-2012, 08:12 PM	#2 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Use whichever one looks the most durable But only use one. The silvery colored dimpled ones burn up pretty quickly in my experience. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

07-10-2012, 08:24 PM	#4 (permalink)
ben1620 Base Member Join Date: Sep 2011 Location: Arkansas Posts: 191 Drives: '05 Denali '09 370z Rep Power: 13	Also the motordyne gaskets are pliable. __________________ 09 Black 7AT Sport, UpRev, Koni, Swift, Whiteline, Motordyne XYZ, Stillen HFC/Exhaust, Stillen 25 row, Pioneer, Infinity

07-10-2012, 09:17 PM	#6 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Motordyne changed what they were using, the old ones were the silver colored dimpled ones and lasted a matter of days. You can try the new ones out and see if they work better. At least on the Y-pipe side of the cat the temperature is slightly lower than the header side. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

07-10-2012, 09:19 PM	#7 (permalink)
ben1620 Base Member Join Date: Sep 2011 Location: Arkansas Posts: 191 Drives: '05 Denali '09 370z Rep Power: 13	Thanks again. I'm putting the MD gaskets on now. I'll update tomorrow. __________________ 09 Black 7AT Sport, UpRev, Koni, Swift, Whiteline, Motordyne XYZ, Stillen HFC/Exhaust, Stillen 25 row, Pioneer, Infinity

07-11-2012, 01:27 PM	#8 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 16	Yes, just use the Motordyne gaskets. The other gaskets shown are the wrong size.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gaskets	Bowshier86	Intake/Exhaust	0	05-13-2012 07:45 PM
[FOR SALE] OBX Y pipe - includes hardware and gaskets	Jordo!	Parts for sale (Private Classifieds)	23	09-25-2011 02:52 PM
Stock Exhaust Gaskets vs Nismo Gaskets	litesky	Nissan 370Z General Discussions	3	09-29-2010 03:35 AM
Berk HFC Gaskets?	JonnieN	Intake/Exhaust	5	06-26-2009 04:06 PM
Gaskets	>135I	Nissan 370Z General Discussions	6	04-29-2009 04:44 PM