Fast Intentions exhaust is here! (continued)

TaroBaapG35

Installation took ~1hr-1hr 30, Had to bend the heat shield a little and add 2 washers to both rear hangars to even out tips.

Completely worth the Wait.

Videos/Review to come soon (After Break in is complete ~End of Week)

At home: (Car is sitting @ Stock Height)

__________________
Future 2021 Z 6MT Current '18 B9 S4 - ABT HAS l AWE Track + RDP 102mm l Roc-Euro l Deval l All 034 l Forge Recirc l Volk TE37 Ultra l Gone 12 370z 6MT l K&N+HPS l FI l EcuTek l Swift l Eibach l

twentyinrims

Um got a question? Washers added and bend the heat shield, is that common?

SwissCheese

Yep! Actually, both are included in the installation instructions! Here's some screenshots from it:

Heat Shield:


Washers:


I went ahead and attached a PDF of the install instructions as well.

Attached Files

370Z Cat Back Instructions.pdf (98.6 KB, 17 views)

__________________
Current Ride: 2012 Nissan 370Z NISMO #0389
Mods: Fast Intentions Resonated Test Pipes and TDX Exhaust with 18" Resonators (#1054), K&N Drop-Ins, GTR Start Button

twentyinrims

Ok, thanks. Should have mine soon.

1222

klee370z

I was a little nervous myself about doing the install, but once you get under there and get going, it's really pretty simple. WD40 is the key, there is also a pretty good video on YouTube that you can use for a reference along with the instructions. You have probably looked at it already, but here is the link if you haven't. Good luck

https://www.youtube.com/watch?v=E98uyU-ISWI

__________________
2012 Nissan 370z Touring Edition, Fast Intentions Non-Resonated Cat-Back Exhaust. Stillen Gen 3 CAI coming soon!

mattanthony23

#1199 non res SS getting installed this Friday at FI!

Thanks to Kevin @ FI for squeezing me into the schedule.

Sales@F.I. Inc.

See you on Friday!

- Kevin

__________________
Follow us on Facebook: Fast Intentions Inc. / Instagram: @FastIntentions
Phone: (805) 522-FAST (3278)
Email: kevin@fastintentions.com
www.fastintentions.com
"FUELED BY PASSION"

Zcup

I found a local shop to do mine. Installed it for $100. He said it was one of the easiest after-market exhaust installs he had ever done. Everything fit. He seemed surprised. Took him 90 minutes. It would take me all day, so $100 well spent.

__________________
F.I. CBE/Z1 Post MAF Tubes/ K&N Drop-ins

TaroBaapG35

It's common on 2009-Early 2012 Models. Mine being early 2012, I had to bend the heat shield back so that the Mufflers are not touching/scraping it. Washers were added to level out the exhaust. Not necessary that everyone will have to, but it's common.

__________________
Future 2021 Z 6MT Current '18 B9 S4 - ABT HAS l AWE Track + RDP 102mm l Roc-Euro l Deval l All 034 l Forge Recirc l Volk TE37 Ultra l Gone 12 370z 6MT l K&N+HPS l FI l EcuTek l Swift l Eibach l

ZWig22

Mind if I ask where you had your exhaust installed?