Fast Intentions exhaust is here! (continued)

jlw2546 · 10-18-2013, 09:50 AM

Quote:

Originally Posted by ZForce

Thanks, Tony

I am good to go as I am not using stock cats and going with your HFC's. All new bolts and gaskets....yippee

Oh....and I am investing in the CF Canisters. Such a great investment. I am in line within the next 2 weeks for mine to be completed and ready for shipping. .... # 872

Do you mean 2 months ? I'm 850 and I'm looking at November 15. Give or take a week.

Rangerz · 10-18-2013, 11:52 AM

Quote:

Originally Posted by jlw2546

Do you mean 2 months ? I'm 850 and I'm looking at November 15. Give or take a week.

I was thinking the same thing. Looks like he had a typo ZForce is #827.

critical · 10-17-2013, 10:53 PM

so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did.

roplusbee · 10-19-2013, 02:03 PM

Quote:

Originally Posted by critical

so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did.

Can You elaborate a little more on this one. I think I missed this one.......

kfull · 10-20-2013, 07:41 PM

selling 18 inch resonated X pipe if anyone is interested :Fast Intentions X pipe with 18 inch resonators

faceglide · 10-21-2013, 02:22 AM

Quote:

Originally Posted by roplusbee

Can You elaborate a little more on this one. I think I missed this one.......

The last bend can make it tricky to get one of the bigger jacks onto the diff jack point without hitting the pipes. I use a wooden block to get in there, works fine. Just make sure it can sit squarely on the jack pad.

critical · 10-22-2013, 10:56 AM

Quote:

Originally Posted by roplusbee

Can You elaborate a little more on this one. I think I missed this one.......

the cans are low. i can barely squeeze my jack under them to get to the rear diff and i hit them if i try to jack from there. it's just not a viable jack position for me any more.

bchinfoon · 10-18-2013, 02:03 PM

Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status.

F.I. Inc. · 10-18-2013, 02:24 PM

Quote:

Originally Posted by bchinfoon

Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status.

Shooting to have it in the mail this afternoon!

Thanks, Tony

AWIZRD · 10-19-2013, 12:11 PM

Today's install day! Yippee!!!!!

konrad · 10-21-2013, 04:12 AM

Install Day-
4AM wake up + 3HR drive to visit Tony and the Fast Intentions Team. I had anxiety the entire drive down there. Tony and the team really know what they are doing - their attention to detail is outstanding - really top notch quality hands down. You can tell that Tony truly cares about his customers and is passionate about his craft. Best investment ever! I could not be any more happy right now. The drive back home with the new exhaust was simply .... AWESOME!!!

Thank you Tony and the Fast Intentions Team !!

megalapagas · 10-21-2013, 06:32 PM

I wasn't sure but I have a stupid question, is it supposed to look like this? And both tips are touching the bumper.

[IMG]

[/IMG]

F.I. Inc. · 10-21-2013, 07:10 PM

Quote:

Originally Posted by megalapagas

I wasn't sure but I have a stupid question, is it supposed to look like this? And both tips are touching the bumper.

Impossible to tell from this angle. If this is your car opposed to a picture you saw online, take a picture from a better angle so we can make a determination...The tips should not touch the bumper. I installed two systems last week and had about 3/16"-1/4" air gap between the top of the tip and bottom of the bumper.

Thanks, Tony

P.S. I received your email and will get back to you shortly.

Super Werty · 10-21-2013, 07:15 PM

no that is definitely wrong...you need to lose that dealer plate frame asap!

megalapagas · 10-21-2013, 07:48 PM

Awesome sounds good tony and here I took quick pics of how it looks, problem is is that I didn't install it myself I had installed by a local shop here that deals with imports and if it wrong aligned well so I can take to get it foxed or just try and see what I can do myself lol (Don't mind the bumber some idiot hit and runned on me but its in preperation to get fixed)

(Right Side)
[IMG]

[/IMG]

(Left Side)

10-17-2013, 10:53 PM	#3 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 16	so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

10-20-2013, 07:41 PM	#5 (permalink)
kfull Track Member Join Date: Mar 2012 Location: Massachusetts Posts: 909 Drives: A lot Rep Power: 15	selling 18 inch resonated X pipe if anyone is interested :Fast Intentions X pipe with 18 inch resonators __________________ 2012 GM 6MT sports package \| FI non res cf exhaust \| K&N Drop Ins \| Viper 3303 security system w/ tilt sensor \| GTR start button \| 35% rear 45% side window tint \| Michelin PSS

10-19-2013, 12:11 PM	#10 (permalink)
AWIZRD Base Member Join Date: Jun 2013 Location: Arizona Posts: 42 Drives: '13 370Z 6MT Sport Rep Power: 13	Today's install day! Yippee!!!!! __________________ 1967 Mustang (ProStreet BBF, 600+ HP) 2001 Porsche 996TT (Sold)

10-21-2013, 06:32 PM	#12 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 13	I wasn't sure but I have a stupid question, is it supposed to look like this? And both tips are touching the bumper. [IMG][/IMG] __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

10-21-2013, 07:15 PM	#14 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 14	no that is definitely wrong...you need to lose that dealer plate frame asap! __________________ The Build

10-18-2013, 02:03 PM	#8 (permalink)
bchinfoon Base Member Join Date: Oct 2009 Location: Austin, TX Posts: 42 Drives: 2010 Nismo 370Z Rep Power: 16	Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status.

10-21-2013, 04:12 AM	#11 (permalink)
konrad Base Member Join Date: Jul 2013 Location: Shell Beach, CA Posts: 2 Drives: 2009 370Z Rep Power: 13	Install Day- 4AM wake up + 3HR drive to visit Tony and the Fast Intentions Team. I had anxiety the entire drive down there. Tony and the team really know what they are doing - their attention to detail is outstanding - really top notch quality hands down. You can tell that Tony truly cares about his customers and is passionate about his craft. Best investment ever! I could not be any more happy right now. The drive back home with the new exhaust was simply .... AWESOME!!! Thank you Tony and the Fast Intentions Team !!

10-21-2013, 07:48 PM	#15 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 13	Awesome sounds good tony and here I took quick pics of how it looks, problem is is that I didn't install it myself I had installed by a local shop here that deals with imports and if it wrong aligned well so I can take to get it foxed or just try and see what I can do myself lol (Don't mind the bumber some idiot hit and runned on me but its in preperation to get fixed) (Right Side) [IMG][/IMG] (Left Side) __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM