CNT H-pipe Issue

scionide · 05-03-2012, 10:31 PM

^ make that two lol.

chrischhorn · 05-04-2012, 01:40 AM

Quote:

Originally Posted by harman.khinda

hey chrischhorn, I got the same issue with the mid-pipe. It's easy to make the assumption ERZ is knowingly shipping "bolt-on" exhausts that require modification to fit; and that they can't be bothered to replace the missing bits and pieces.

It ISN'T an issue with stock cats. It only became an issue to me when we installed HFC's. If i were you, i would go ahead and cut the bracket off just so it isn't an issue in the future for whatever reason. Either way as stated, you get what you pay for so im not mad by any means. Just letting others know my experience and what i did to fix them.

By the way, i hope you bought it off ebay cause they have it posted on ebay for $50 less then forum price.........

harman.khinda · 05-04-2012, 11:34 AM

I don't plan on changing my cats.... should have left it on.

chrischhorn · 05-04-2012, 10:25 PM

Quote:

Originally Posted by harman.khinda

I don't plan on changing my cats.... should have left it on.

Doesn't make a difference. Just an unnecessary hassle for you lol. Doesn't effect the durability of it. Wont cause vibrations or anything. It was just a random extra bracket to start.

MacLean · 05-04-2012, 11:05 PM

edub370 & scionide, the two of you are pretty effen lucky then. Not sure if everyone else had some drugged out, or hung over SOB put their pieces together.

harman.khinda · 05-05-2012, 05:05 PM

^ haha. yeah I had trouble getting everything to line up too; muffler's hitting my swaybar. I live in a small town; no exhaust shop is open till Monday.

stells370 · 05-07-2012, 12:24 PM

mine went on great no problems at all... but i did have that little cross pipe welded instead of using a clamp

Cell · 05-07-2012, 01:58 PM

Quote:

Originally Posted by edub370

i feel like the only person that didnt have a problem with putting this exhaust on

I didn't have any problems either.

harman.khinda · 05-08-2012, 06:31 PM

I got done installing my exhaust on Friday and really had to muscle the flanges to get them lined up. There's not enough clearance between the mufflers and rear sway bar, the rattle was horrible. It was so bad that the screws holding the exhaust tips in place fell out....

The exhaust note isn't bad, the price point is good, and I really like how quite it is. The fact that they knowingly ship out exhausts that are missing accessories and you have to cut a brace to make sure it deosn't f'up your driveshaft is a major issue with me.

harman.khinda · 05-10-2012, 07:01 AM

I pm ERZ and got a prompt response they will ship the screw tips at no extra charge. +1 for customer service.

chrischhorn · 05-10-2012, 10:16 AM

Quote:

Originally Posted by harman.khinda

I pm ERZ and got a prompt response they will ship the screw tips at no extra charge. +1 for customer service.

Must be nice.....i already posted the response from them when i didn't receive the bolts at all. I guess they like to pick and choose who they help. Good for you though.

harman.khinda · 05-10-2012, 02:43 PM

^ i was suprised. must have been a different person. try pming them.

harman.khinda · 05-10-2012, 02:49 PM

^ I was suprised and happy.

ERZ response to the brace question and muffler hitting the rear sway bar-

"What you need to do is put a radiator hose and cable tie it on the part of the exhaust that hits the sway bar this will eliminate and rattling noise you might have. What is your shipping address I can reship you 4 of those screws that is not a problem. There was three brackets weld on to the mid pipe one on top and two on the bottom the two on the bottom won't hit anything since it's facing the ground so you saw off the one on top?"

MaDMaXX · 05-10-2012, 03:10 PM

You were happy with that??!!!

Wow, ok.

chrischhorn · 05-10-2012, 11:43 PM

Quote:

Originally Posted by MaDMaXX

You were happy with that??!!!

Wow, ok.

exactly.......wasn't even gonna bother em with the brace on mine cause i knew their response would basically be "derp derp derp fix it yourself. derp derp derp." Hell I was too much of an inconvenience to get screws for my tips....

05-07-2012, 12:24 PM	#22 (permalink)
stells370 Enthusiast Member Join Date: Mar 2011 Location: Jennings, la Posts: 262 Drives: 09 370z pw Rep Power: 14	mine went on great no problems at all... but i did have that little cross pipe welded instead of using a clamp __________________ 09 sport/swift/ichiba/cnt/blue batmobile/alpine/evo-r/ams/volk/stillen

05-10-2012, 03:10 PM	#29 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 13	You were happy with that??!!! Wow, ok. __________________ '04.5 350Z - Very Motordyne.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW: Megan Racing Y-Pipe, Mid-Pipe, Axlebacks! Best Prices + Free S&H!!	AJ@ECSMotorsports	Exhaust/Intake	30	01-24-2016 12:15 PM
*MXP 370z Test Pipe SUPER SALE* \| Resonated and Straight Pipe	SE	Exhaust/Intake	10	04-17-2012 05:33 PM
Ebay test-pipe and y-pipe combo	harman.khinda	Intake/Exhaust	6	02-13-2012 08:43 PM
Tanabe y pipe vs motordyne y pipe help me choose please	zuperman 370	Intake/Exhaust	14	01-30-2012 10:48 PM
Help CNT Racing Test Pipe Install Issue	fairladyZ34	Intake/Exhaust	14	04-18-2011 02:28 PM

05-03-2012, 10:31 PM	#16 (permalink)
scionide Enthusiast Member Join Date: Mar 2011 Location: so-cal Posts: 436 Drives: 11 370z PW 6mt Rep Power: 14	^ make that two lol.

05-04-2012, 11:34 AM	#18 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	I don't plan on changing my cats.... should have left it on.

05-04-2012, 11:05 PM	#20 (permalink)
MacLean A True Z Fanatic Join Date: Apr 2012 Location: Houston Posts: 1,589 Drives: '12 GM Nismo # 0445 Rep Power: 16	edub370 & scionide, the two of you are pretty effen lucky then. Not sure if everyone else had some drugged out, or hung over SOB put their pieces together.

05-05-2012, 05:05 PM	#21 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	^ haha. yeah I had trouble getting everything to line up too; muffler's hitting my swaybar. I live in a small town; no exhaust shop is open till Monday.

05-08-2012, 06:31 PM	#24 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	I got done installing my exhaust on Friday and really had to muscle the flanges to get them lined up. There's not enough clearance between the mufflers and rear sway bar, the rattle was horrible. It was so bad that the screws holding the exhaust tips in place fell out.... The exhaust note isn't bad, the price point is good, and I really like how quite it is. The fact that they knowingly ship out exhausts that are missing accessories and you have to cut a brace to make sure it deosn't f'up your driveshaft is a major issue with me.

05-10-2012, 07:01 AM	#25 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	I pm ERZ and got a prompt response they will ship the screw tips at no extra charge. +1 for customer service.

05-10-2012, 02:43 PM	#27 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	^ i was suprised. must have been a different person. try pming them.

05-10-2012, 02:49 PM	#28 (permalink)
harman.khinda Enthusiast Member Join Date: Feb 2012 Location: Red Bluff, CA Posts: 378 Drives: 10 Nissan 370 PG 7AT Rep Power: 6723	^ I was suprised and happy. ERZ response to the brace question and muffler hitting the rear sway bar- "What you need to do is put a radiator hose and cable tie it on the part of the exhaust that hits the sway bar this will eliminate and rattling noise you might have. What is your shipping address I can reship you 4 of those screws that is not a problem. There was three brackets weld on to the mid pipe one on top and two on the bottom the two on the bottom won't hit anything since it's facing the ground so you saw off the one on top?"