AAM short tail exhaust installed (shout out to Daniel at Z-Street club)

864Zbeast · 01-21-2012, 03:03 PM

How much did you pay?

I ordered my gtr start button from z1. Do the spacers come in a set of 4?

darionlear · 01-21-2012, 03:08 PM

Two sets. Like 65 for each pair... was like 140 total. LoL

864Zbeast · 01-21-2012, 03:11 PM

Nice so they work fine? I was looking at inchiba or h&r spacers and they were crazy expensive like $160 for a set of 2

darionlear · 01-21-2012, 03:14 PM

These are awesome. I've hit 130+... no shaking .... very good. Aluminum ... I'd recommend

MJB · 01-21-2012, 07:34 PM

Quote:

Originally Posted by darionlear

These are awesome. I've hit 130+... no shaking .... very good. Aluminum ... I'd recommend

I have Z1 spacers as well, the ones with extended studs. I drove all the way from TX to CA with them, no vibrations or anything. Great quality.

864Zbeast · 01-21-2012, 03:21 PM

Very nice man! Yeah I might get those next... My motto one mod at a time lol. I just want the spacers to look fresh when I decide to go with springs. I want the driving to feel the same which obviously it does.

darionlear · 01-21-2012, 03:32 PM

That's why I chose 20mm... I want flush... and springs will just barley clear... ill post pics once I get. >=)

roplusbee · 01-21-2012, 04:20 PM

Which ones did you go with? The ones with the extended studs or the bolt ons?

sfearl1 · 01-21-2012, 04:32 PM

I got mine from Z1 as well and can follow up Dan's comments and say they're great quality parts. I had a slight issue w/ one of the lugs supplied w/ the 20mm's but that was user error (rounded the nut off torquing it down).

mine are bolt-on's... no wobbling, vibration, nothing out of the ordinary, and it's been about month since install.

roplusbee · 01-21-2012, 04:34 PM

Cool

darionlear · 01-21-2012, 06:49 PM

I did like a week of searching. The ones Z1 have were best on price and quality. Not in that order... O_o lol

darionlear · 01-21-2012, 06:51 PM

Quote:

Originally Posted by sfearl1

it was a reply to your email the other day (yesterday I think)...

lmk if it didn't go through and I'll resend.

What email are you sending it to? LoL

Use

Vicente.Daniel@Z-Street.org

sfearl1 · 01-22-2012, 02:49 PM

Yeah, that's the one. Just resent/forwarded it again.

Quote:

Originally Posted by darionlear

What email are you sending it to? LoL

Use

Vicente.Daniel@Z-Street.org

864Zbeast · 01-21-2012, 07:09 PM

Quote:

Originally Posted by darionlear

I did like a week of searching. The ones Z1 have were best on price and quality. Not in that order... O_o lol

You did get hubcentric you said and 2 sets. I'm going to make sure I get the right ones. I heard bolt ons don't work with springs.

darionlear · 01-21-2012, 07:15 PM

Quote:

Originally Posted by 864Zbeast

You did get hubcentric you said and 2 sets. I'm going to make sure I get the right ones. I heard bolt ons don't work with springs.

I got these

http://www.z1motorsports.com/g37_370...oducts_id=5392

01-21-2012, 04:20 PM	#8 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Which ones did you go with? The ones with the extended studs or the bolt ons? __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

01-21-2012, 04:32 PM	#9 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	I got mine from Z1 as well and can follow up Dan's comments and say they're great quality parts. I had a slight issue w/ one of the lugs supplied w/ the 20mm's but that was user error (rounded the nut off torquing it down). mine are bolt-on's... no wobbling, vibration, nothing out of the ordinary, and it's been about month since install. __________________ Scott

01-21-2012, 04:34 PM	#10 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Cool __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just installed AAM Competition S-Line Short Tail Exhaust	MQDuclos	Intake/Exhaust	37	02-21-2017 12:44 PM
[FOR SALE] Custom short tail exhaust	BAHUMAT2JZ	Parts for sale (Private Classifieds)	16	08-09-2012 02:51 PM
AAM Short Tail Exhaust	MrZ	Intake/Exhaust	15	03-07-2012 09:23 AM
[WTB] AAM Short tail exhaust	864Zbeast	Parts for sale (Private Classifieds)	3	01-09-2012 11:36 AM
[FOR SALE] --BRAND NEW AAM Short Tail Exhaust--	urvokbm	Parts for sale (Private Classifieds)	6	12-14-2011 09:55 AM

01-21-2012, 03:03 PM	#1 (permalink)
864Zbeast Track Member Join Date: May 2011 Location: Walhalla/Clemson, SC Posts: 874 Drives: 09 BS 370z Rep Power: 15	How much did you pay? I ordered my gtr start button from z1. Do the spacers come in a set of 4?

01-21-2012, 03:08 PM	#2 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 13	Two sets. Like 65 for each pair... was like 140 total. LoL

01-21-2012, 03:11 PM	#3 (permalink)
864Zbeast Track Member Join Date: May 2011 Location: Walhalla/Clemson, SC Posts: 874 Drives: 09 BS 370z Rep Power: 15	Nice so they work fine? I was looking at inchiba or h&r spacers and they were crazy expensive like $160 for a set of 2

01-21-2012, 03:14 PM	#4 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 13	These are awesome. I've hit 130+... no shaking .... very good. Aluminum ... I'd recommend

01-21-2012, 03:21 PM	#6 (permalink)
864Zbeast Track Member Join Date: May 2011 Location: Walhalla/Clemson, SC Posts: 874 Drives: 09 BS 370z Rep Power: 15	Very nice man! Yeah I might get those next... My motto one mod at a time lol. I just want the spacers to look fresh when I decide to go with springs. I want the driving to feel the same which obviously it does.

01-21-2012, 03:32 PM	#7 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 13	That's why I chose 20mm... I want flush... and springs will just barley clear... ill post pics once I get. >=)

01-21-2012, 06:49 PM	#11 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 13	I did like a week of searching. The ones Z1 have were best on price and quality. Not in that order... O_o lol