GT-R R35 Plenum Test Fitment on my VQ37HR

Kingbaby · 08-07-2013, 07:25 PM

I think we're going to give GTM our money?

XwChriswX · 08-07-2013, 10:31 PM

Quote:

Originally Posted by Kingbaby

I think we're going to give GTM twice as much money?

Fixed.

chrischhorn · 08-08-2013, 12:58 AM

Quote:

Originally Posted by XwChriswX

Fixed.

Twicce as much? Earlier in this post, ChrisUr was saying his is gonna cost $1500 at a minimum....I think you got it backwards.

XwChriswX · 08-08-2013, 01:00 AM

Quote:

Originally Posted by chrischhorn

Twicce as much? Earlier in this post, ChrisUr was saying his is gonna cost $1500 at a minimum....I think you got it backwards.

He also said that his cost would include Everything you'd need to do it, including (if possible) his strut bar.

At GTM, just buying the manifold alone sets you back $2k. And they haven't even produced a strut bar mock up yet...

Not to mention, it was just for the lulz...

SgtGoldy · 08-08-2013, 12:21 AM

V8Killer · 08-08-2013, 07:24 AM

I already spoke to one shop near me to modify the GTR manifold I currently have to fit and they are asking 1250. That is not including the strut bar or enabling this manifold for direct injection. I was hoping to get a pm back from the OP materials and measurements but it's been a few weeks now and no answer.

Chuck33079 · 08-08-2013, 07:35 AM

Quote:

Originally Posted by V8Killer

direct injection

For meth/nitrous, or are you talking about fuel?

V8Killer · 08-09-2013, 07:45 AM

Quote:

Originally Posted by Chuck33079

For meth/nitrous, or are you talking about fuel?

Nitrous

sstroudwku · 08-08-2013, 05:53 PM

I messaged OP as well looking for info on this. My dad is a machinist here in the states and sells CNC, Vertical/Horizontal Lathes, and Drill and tap machines. I showed him the images and he said it wouldn't cost much in materials to have these made up. Would gladly help get this project going. There are several machine shops that owe him favors.

V8Killer · 08-09-2013, 08:11 AM

Quote:

Originally Posted by sstroudwku

I messaged OP as well looking for info on this. My dad is a machinist here in the states and sells CNC, Vertical/Horizontal Lathes, and Drill and tap machines. I showed him the images and he said it wouldn't cost much in materials to have these made up. Would gladly help get this project going. There are several machine shops that owe him favors.

That would be great man sounds like a good deal. Problem is OP is not coming on the forum, I hope it's just he doesn't have time not something bad has happened.

Spikuh · 08-09-2013, 08:49 AM

Quote:

Originally Posted by V8Killer

That would be great man sounds like a good deal. Problem is OP is not coming on the forum, I hope it's just he doesn't have time not something bad has happened.

I wouldn't lose faith just yet. We know he gets busy and will go long stints without an appearance only to show up and make us all have to clean off our keyboards and screens.

Kingbaby · 08-08-2013, 07:24 PM

Ask dad rough dimension of 17" lenght by 5" width and 5" depth box is the rough size of the adpater.

How much would it be to has out #20?

sstroudwku · 08-11-2013, 03:53 PM

Quote:

Originally Posted by Kingbaby

Ask dad rough dimension of 17" lenght by 5" width and 5" depth box is the rough size of the adpater.

How much would it be to has out #20?

it's not the material that is expensive it's the time. When dealing in aluminum we drill, cut, machine with carbide only. If I could get dimensions I could possible get a half dozen or so done for free as part of a sales demonstration to his clients.

Kingbaby · 08-12-2013, 12:34 AM

I just kicked my wife

Op where the hell are you? Cut vacation short!

V8Killer · 08-21-2013, 04:12 AM

Please come back

08-08-2013, 12:21 AM	#5 (permalink)
SgtGoldy A True Z Fanatic Join Date: Feb 2009 Location: Orange County, CA Posts: 3,503 Drives: C63 AMG - LSD Rep Power: 651	__________________ C63 AMG LSD - Straight Pipe - EuroCharge v5 - Vossen CV7 - IG: @SuperFastYo

08-08-2013, 07:24 AM	#6 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	I already spoke to one shop near me to modify the GTR manifold I currently have to fit and they are asking 1250. That is not including the strut bar or enabling this manifold for direct injection. I was hoping to get a pm back from the OP materials and measurements but it's been a few weeks now and no answer. __________________ "Punch" Too much to list and a baby shot of nitrous....

08-08-2013, 05:53 PM	#9 (permalink)
sstroudwku Base Member Join Date: May 2013 Location: Bowling Green, Ky Posts: 33 Drives: '11 370z MB 6mt Rep Power: 13	I messaged OP as well looking for info on this. My dad is a machinist here in the states and sells CNC, Vertical/Horizontal Lathes, and Drill and tap machines. I showed him the images and he said it wouldn't cost much in materials to have these made up. Would gladly help get this project going. There are several machine shops that owe him favors. Snow dog and critical like this. __________________ 2011 - MB - Base - 6MT - AFE Takeda - Nismo S CBE Nissan Master Tech - Swope Nissan - Elizabethtown, KY

08-21-2013, 04:12 AM	#15 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	Please come back __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kinetix 370Z Intake Plenum! Should i Buy it ?	Zedx	Intake/Exhaust	41	04-21-2012 12:59 PM
vq37hr	darron	Wanted	6	09-07-2011 11:27 PM
Plenum spacer anyone???	john370z	Intake/Exhaust	13	03-27-2010 11:02 AM
HKS test fitment on our PROJECT 370Z	LOU@AMPLIFIED	Brakes & Suspension	20	03-23-2009 01:13 PM