Slow acceleration after intake and exhaust

Originally Posted by henry0844

thanks guys for all your input so far. as to the clamp question, I have worm type at the throttle body and t bolts for the rest. I have some extra t bolts that Im going to install at the throttle body just to make sure everything is clamped securely. I'm going to look at everything this weekend and see if I can find out if there is a leak somewhere. about the idle, it seems to idle smoothly but sometimes idles a little rough. the thing I notice the most is when the car is warmed up and idling the revs will drop a little then go back to normal. idle doesn't bounce around but drops slightly then goes back to normal. it's also not the fan kicking on either because the fan doesn't come on when the revs drop. hope this makes sense.

Originally Posted by Methodical4u

hmmmm.... I haven't been around my car while it was warmed up and idling to see if it does this, so i'm not sure about it.... i'm to cheap with gas lol. It's always possible though. How many miles are on the set-up since everything was installed?

There is also the chance the mechanic damaged the MAF sensor when doing the install. Not like most people are going to be honest and pay 200 or however much those things are to replace it.

Originally Posted by henry0844

2000 miles on g3's, 500 with both g3's and exhaust. like I stated before, car ran great then overnight took a **** on me. hasn't run well since.

Originally Posted by Methodical4u

Yeah, that's so odd. I really think the issue will wind up being a MAF sensor going bad or something along that line, but hopefully not.