Washer Mod

dudesky · 05-27-2011, 02:23 PM

hello guys,
I'm trying to do washer mod DIY and need to know the size of bolts and washers.
I believe my stock bolts are probably really rusted and might want to replace them to new ones. Can some one tell me the exact sizes of the bolts and washer I need to do for this Mod?
Thank You

6MT · 05-27-2011, 02:29 PM

"washer" mod?! Are you talking about the windsheild washer?

Kingbaby · 05-27-2011, 02:32 PM

no!

ahahahahahahah

cheap and retarded don't do it...better off buying a single if or welding a straight pipe in there

6MT · 05-27-2011, 02:40 PM

OK, I'll give

are you talking about?

sinceday1 · 05-27-2011, 02:43 PM

It's a mod strictly for tonal improvement of your exhaust.

It's done by adding a couple washer between exhaust canister and the pipe on the bolt creating a small gap.

dudesky · 05-27-2011, 02:52 PM

so you guys don't recommend it? What about removing my muffler and weld custom pipe and tip?? but then, not having a muffler is illegal, isn't it?

Kingbaby · 05-27-2011, 02:57 PM

I don't recommend it...

6MT · 05-27-2011, 02:57 PM

Quote:

Originally Posted by sinceday1

it's a mod strictly for tonal improvement of your exhaust.

It's done by adding a couple washer between exhaust canister and the pipe on the bolt creating a small gap.

t h a n k y o u !

WAGAWAGA · 05-27-2011, 02:59 PM

i think it sounds really nice.

dudesky · 05-27-2011, 03:15 PM

hmmmm maybe, I will do it just until I get my cat-back exhaust

2ndChance · 05-28-2011, 01:08 AM

Don't do the washer mod.. it sounds raspy as hell!

If you want good sound for cheap, fabricate some straight tubes with tips. That will regulate the airflow and remove some of the rasp.

Chriz · 05-28-2011, 01:28 AM

Ive done it before, didn't think it was raspy at all. I believe it was lock washer = 10mm and bolt = 10mm-1.25 x 30mm

05-27-2011, 02:23 PM	#1 (permalink)
dudesky Track Member Join Date: Apr 2011 Location: Kraid's lair Posts: 516 Drives: E46 M3 6MT Rep Power: 15	Washer Mod hello guys, I'm trying to do washer mod DIY and need to know the size of bolts and washers. I believe my stock bolts are probably really rusted and might want to replace them to new ones. Can some one tell me the exact sizes of the bolts and washer I need to do for this Mod? Thank You

05-27-2011, 02:29 PM	#2 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1789	"washer" mod?! Are you talking about the windsheild washer? __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

05-27-2011, 02:40 PM	#4 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1789	OK, I'll give are you talking about? __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

05-28-2011, 01:28 AM	#12 (permalink)
Chriz Track Member Join Date: Dec 2009 Location: Houston TX Posts: 626 Drives: '10 370z PW 7AT Rep Power: 16	Ive done it before, didn't think it was raspy at all. I believe it was lock washer = 10mm and bolt = 10mm-1.25 x 30mm __________________ PW 7AT w/Sports Pkg Hook Em!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crush Washer?	NeedforZ	Nissan 370Z General Discussions	32	04-24-2017 12:11 PM
Washer Mod	Nismoracer	Nismo 370Z	70	09-21-2015 11:37 PM
Enhance the look of your P/S, Washer, and Coolent Reservoirs!	DressUpBolts	Body Interior/Exterior	16	10-22-2013 09:50 PM
Headlight Washer?	Bagherra	Nissan 370Z Photos / Spyshots / Video / Media Gallery	8	01-07-2011 05:45 PM
What is washer mod??	Dan Z Man	Intake/Exhaust	90	09-28-2010 10:27 AM

05-27-2011, 02:43 PM	#5 (permalink)
sinceday1 Track Member Join Date: Oct 2009 Location: Canada Posts: 514 Drives: 09 Nissan 370Z M6 Rep Power: 16	It's a mod strictly for tonal improvement of your exhaust. It's done by adding a couple washer between exhaust canister and the pipe on the bolt creating a small gap.

05-27-2011, 02:52 PM	#6 (permalink)
dudesky Track Member Join Date: Apr 2011 Location: Kraid's lair Posts: 516 Drives: E46 M3 6MT Rep Power: 15	so you guys don't recommend it? What about removing my muffler and weld custom pipe and tip?? but then, not having a muffler is illegal, isn't it?

05-27-2011, 02:59 PM	#9 (permalink)
WAGAWAGA Base Member Join Date: Apr 2010 Location: riverside Posts: 155 Drives: 2010 370z Black Rep Power: 15	i think it sounds really nice.

05-27-2011, 03:15 PM	#10 (permalink)
dudesky Track Member Join Date: Apr 2011 Location: Kraid's lair Posts: 516 Drives: E46 M3 6MT Rep Power: 15	hmmmm maybe, I will do it just until I get my cat-back exhaust

05-28-2011, 01:08 AM	#11 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	Don't do the washer mod.. it sounds raspy as hell! If you want good sound for cheap, fabricate some straight tubes with tips. That will regulate the airflow and remove some of the rasp.