Stillen HFC vs. BERK HFC

travisjb · 04-13-2009, 10:42 AM

Ok... are you saying that based on experience with a 350z or this car ?

Josh, this would be a good place for you to step in and comment

NIZMOZ · 04-13-2009, 02:42 PM

Quote:

Originally Posted by travisjb

Ok... are you saying that based on experience with a 350z or this car ?

Josh, this would be a good place for you to step in and comment

350Z with the HR. The HR is so similar to your 370z VHR that it will happen. Reason why Berk said it too that it needs the non-foulers.

semtex · 04-13-2009, 12:15 PM

In all this discussion about CELs and extended tubes, etc., I think we've glossed over something else that's kinda significant. Stillen claims less of a gain on their HFCs than Berk. Although I must say, their web page for the HFCs is a tad confusing right now, because they claim only +9hp and +8ft/lbs tq. Yet, when you open up their dyno chart (for a G37), it shows +16hp and +13ft/lbs tq. In any case, they're claiming less gain than Berk either way you look at it.

NIZMOZ · 04-13-2009, 02:46 PM

Quote:

Originally Posted by semtex

In all this discussion about CELs and extended tubes, etc., I think we've glossed over something else that's kinda significant. Stillen claims less of a gain on their HFCs than Berk. Although I must say, their web page for the HFCs is a tad confusing right now, because they claim only +9hp and +8ft/lbs tq. Yet, when you open up their dyno chart (for a G37), it shows +16hp and +13ft/lbs tq. In any case, they're claiming less gain than Berk either way you look at it.

It is possible they are using a less flowing cats on theirs compared to Berk, so they may clean better but also flow slightly better. Berks are proven and flow great. If someone get's these cats, please take a picture inside of the cat so we can see how they are made through one of the pipe openings.

NIZMOZ · 04-13-2009, 03:25 PM

The cats caused it. Exactly as you said. As many have noticed on the forum, it took their cars 3-4k of miles to have a light come on. Some came on right away, but most took a few thousand miles.

Nothing changed on my car during that time. Nothing.

RCZ · 04-13-2009, 06:34 PM

Gahhh I want the Stillen pipes already!

dainedazz · 04-14-2009, 06:59 AM

hmmm CEL's with HFC's? tsk tsk. i hate it when i see that light. i had that on my old b13. hmm did anyone have CEL's on their Stillen Cat back alone? or even with the g3's? i really would like to know cuz i'm really interested in getting the Stillen exhaust system with the g3 intakes. i was wondering if they'll throw CELs. looking forward to answers.

semtex · 04-14-2009, 07:06 AM

Quote:

Originally Posted by dainedazz

hmmm CEL's with HFC's? tsk tsk. i hate it when i see that light. i had that on my old b13. hmm did anyone have CEL's on their Stillen Cat back alone? or even with the g3's? i really would like to know cuz i'm really interested in getting the Stillen exhaust system with the g3 intakes. i was wondering if they'll throw CELs. looking forward to answers.

I haven't had a single CEL, and I have all three components installed.

Musashi · 04-14-2009, 08:15 AM

Quote:

Originally Posted by dainedazz

hmmm CEL's with HFC's? tsk tsk. i hate it when i see that light. i had that on my old b13. hmm did anyone have CEL's on their Stillen Cat back alone? or even with the g3's? i really would like to know cuz i'm really interested in getting the Stillen exhaust system with the g3 intakes. i was wondering if they'll throw CELs. looking forward to answers.

I have the Stillen cat back and gen 3 air intake. NO CELS.

Kyle@STILLEN · 04-14-2009, 12:20 PM

Hey Guys,

Sorry that we haven't jumped in here yet. Josh and I hadn't seen this thread until it was brought to my attention.

It's pretty much a gaurantee that the hi-flow cats will set off check engine lights. We are currently working on a way to defeat that though and hope to have that solution soon. Our engineers are testing two different ways to fix the CEL issue. We would like to stay away from tricking the ECU if possible.

In regards to the advertised horsepower output. You are correct, we have a typo on the website and we will correct that ASAP. The dyno for the G37 is the one we should be using for the 370Z but our literature is from the 350Z.

NIZMOZ · 04-14-2009, 07:52 AM

^^ Like I said, give it more time. We all thought the same at first.

semtex · 04-14-2009, 08:10 AM

^^ I'm just answering the guy's question, not taking a position as to whether or not it'll ever happen. And quite frankly, I don't care if it does. If it throws a CEL, then I'll fix it. I just don't consider it that big a deal. If you're into modding, it just comes with the territory as far as I'm concerned. I expect problems, and when I don't experience them I consider it a bonus that exceeds my expectations. IMHO, anyone who expects everything to be smooth sailing just isn't experienced at modding.

axio · 04-14-2009, 03:40 PM

Quote:

Originally Posted by semtex

^^ I'm just answering the guy's question, not taking a position as to whether or not it'll ever happen. And quite frankly, I don't care if it does. If it throws a CEL, then I'll fix it. I just don't consider it that big a deal. If you're into modding, it just comes with the territory as far as I'm concerned. I expect problems, and when I don't experience them I consider it a bonus that exceeds my expectations. IMHO, anyone who expects everything to be smooth sailing just isn't experienced at modding.

How exactly do you intend to fix it? I ordered the Berk cats, and like you, i'm not too concerned about a CEL. But if it shows up, is the fix something as simple as removing the cat, and then inspecting it and cleaning it out?

Forgive me if this is incorrect, but could the CEL be showing up on these Berk cats because of carbon build-up in that O2 sensor extender tube? could it be something as simple as removing the O2 sensor and then cleaning any carbon build-up? Again, I have no idea, just throwing out some possibilities on what could be causing it.

semtex · 04-14-2009, 03:44 PM

Quote:

Originally Posted by axio

How exactly do you intend to fix it? I ordered the Berk cats, and like you, i'm not too concerned about a CEL. But if it shows up, is the fix something as simple as removing the cat, and then inspecting it and cleaning it out?

Forgive me if this is incorrect, but could the CEL be showing up on these Berk cats because of carbon build-up in that O2 sensor extender tube? could it be something as simple as removing the O2 sensor and then cleaning any carbon build-up? Again, I have no idea, just throwing out some possibilities on what could be causing it.

Dude, review the thread. I already explained the fix a couple of pages back. I even included a link to a DIY with pics.

Edit: Here's the link to the exact post. It's called the non-fouler method. You can also just stuff some steel wool into the port and apparently that works as well. Hope this helps! (Actually, I hope your HFCs never throw a CEL to require one of these fixes to begin with!) Stillen HFC vs. BERK HFC

axio · 04-14-2009, 03:51 PM

Quote:

Originally Posted by semtex

Dude, review the thread. I already explained the fix a couple of pages back. I even included a link to a DIY with pics.

Edit: Here's the link to the exact post. It's called the non-fouler method. You can also just stuff some steel wool into the port and apparently that works as well. Hope this helps! (Actually, I hope your HFCs never throw a CEL to require one of these fixes to begin with!) Stillen HFC vs. BERK HFC

Ahhhh woops, my bad. Thanks again, great info on this thread

I hope you never throw any as well, but aparantly you know how to fix em in case they do!

04-13-2009, 12:15 PM	#3 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 55 Posts: 5,995 Drives: People to drink Rep Power: 34	In all this discussion about CELs and extended tubes, etc., I think we've glossed over something else that's kinda significant. Stillen claims less of a gain on their HFCs than Berk. Although I must say, their web page for the HFCs is a tad confusing right now, because they claim only +9hp and +8ft/lbs tq. Yet, when you open up their dyno chart (for a G37), it shows +16hp and +13ft/lbs tq. In any case, they're claiming less gain than Berk either way you look at it. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-13-2009, 03:25 PM	#5 (permalink)
NIZMOZ Track Member Join Date: Nov 2008 Location: San Antonio, TX Posts: 634 Drives: 07 NISMO 350Z SA M6 Rep Power: 492	The cats caused it. Exactly as you said. As many have noticed on the forum, it took their cars 3-4k of miles to have a light come on. Some came on right away, but most took a few thousand miles. Nothing changed on my car during that time. Nothing. __________________ SOLD: 2007 NISMO 350Z #0044 Silver Alloy New DD: 2010 Titan Pro4X CC

04-14-2009, 07:52 AM	#11 (permalink)
NIZMOZ Track Member Join Date: Nov 2008 Location: San Antonio, TX Posts: 634 Drives: 07 NISMO 350Z SA M6 Rep Power: 492	^^ Like I said, give it more time. We all thought the same at first. __________________ SOLD: 2007 NISMO 350Z #0044 Silver Alloy New DD: 2010 Titan Pro4X CC

04-14-2009, 08:10 AM	#12 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 55 Posts: 5,995 Drives: People to drink Rep Power: 34	^^ I'm just answering the guy's question, not taking a position as to whether or not it'll ever happen. And quite frankly, I don't care if it does. If it throws a CEL, then I'll fix it. I just don't consider it that big a deal. If you're into modding, it just comes with the territory as far as I'm concerned. I expect problems, and when I don't experience them I consider it a bonus that exceeds my expectations. IMHO, anyone who expects everything to be smooth sailing just isn't experienced at modding. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf. Last edited by semtex; 04-14-2009 at 08:14 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-13-2009, 10:42 AM	#1 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 190	Ok... are you saying that based on experience with a 350z or this car ? Josh, this would be a good place for you to step in and comment

04-13-2009, 06:34 PM	#6 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1120	Gahhh I want the Stillen pipes already!

04-14-2009, 06:59 AM	#7 (permalink)
dainedazz A True Z Fanatic Join Date: Jan 2009 Location: NY, NJ, Philippines Posts: 1,325 Drives: 09' SR 6MT Z34 Rep Power: 295	hmmm CEL's with HFC's? tsk tsk. i hate it when i see that light. i had that on my old b13. hmm did anyone have CEL's on their Stillen Cat back alone? or even with the g3's? i really would like to know cuz i'm really interested in getting the Stillen exhaust system with the g3 intakes. i was wondering if they'll throw CELs. looking forward to answers.

04-14-2009, 12:20 PM	#10 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 308	Hey Guys, Sorry that we haven't jumped in here yet. Josh and I hadn't seen this thread until it was brought to my attention. It's pretty much a gaurantee that the hi-flow cats will set off check engine lights. We are currently working on a way to defeat that though and hope to have that solution soon. Our engineers are testing two different ways to fix the CEL issue. We would like to stay away from tricking the ECU if possible. In regards to the advertised horsepower output. You are correct, we have a typo on the website and we will correct that ASAP. The dyno for the G37 is the one we should be using for the 370Z but our literature is from the 350Z.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Berk Technology HFC Install	M.Bonanni	DIY Section (Do-It-Yourself)	203	08-03-2018 05:12 AM
Stillen Exhaust with Berk HFCs	semtex	Intake/Exhaust	127	12-01-2009 02:53 PM
Stillen Headers + Berk HFCs self-install report	wstar	Intake/Exhaust	84	04-14-2009 12:09 PM
Redline Time Attack Results are in! DDM 370Z, BERK S2000 & BERK BMW 135i on track!	BerkTech	Track / Autocross / Drifting / Dragstrip	8	04-02-2009 11:37 AM