|
Hi guys, There is no problem for these to clear. This is of course referencing our kit. We recommend the recessed mounting posistion to better support the oil cooler, while
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
01-21-2011, 09:38 AM
|
#1 (permalink) |
|
Base Member
Join Date: Oct 2010
Location: Hiram, GA
Posts: 83
Drives: 2011 370Z track rat
Rep Power: 15  |
Hi guys,
There is no problem for these to clear. This is of course referencing our kit. We recommend the recessed mounting posistion to better support the oil cooler, while not putting as much strain on the composite core support. We have actually had the Stillen Gen 3's installed on our car with the oil cooler in the forward posistion, and a nismo front body brace (we did have to shim the mounting of the nismo front body brace to clear our AN fittings on the core, but it all fit). There is no additional modification or deviation from our standard install to allow Stillen Gen 3 intakes. I hope this helps. 
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler | Dustin@Z1 | Engine & Drivetrain | 158 | 03-10-2014 02:27 PM |
| STILLEN oil cooler kit + STILLEN power steering cooler = fit? | ZBW39 | STILLEN | 2 | 07-02-2010 01:08 PM |
| Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust | axio | Intake/Exhaust | 82 | 07-31-2009 12:41 PM |
| Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust.... | 2theextreme | The Lounge (Off Topic) | 8 | 06-18-2009 10:01 PM |
Hybrid Mode
