Stillen G3 Intake fit with 34 Row oil cooler?
 

Will it fit?
According to Z1motorsports

34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler.

Have installed plenty. No problem.

So there will be no problems at all when installing these two together? No modifications required?

Installed where? description on Z1's website says it will need to be relocated

Simple relocation....that's all...It will work with the Stillen G3's...you will just have to relocate the oil cooler from mounting space indicated in the manual....

Hi guys,

There is no problem for these to clear. This is of course referencing our kit. We recommend the recessed mounting posistion to better support the oil cooler, while not putting as much strain on the composite core support.

We have actually had the Stillen Gen 3's installed on our car with the oil cooler in the forward posistion, and a nismo front body brace (we did have to shim the mounting of the nismo front body brace to clear our AN fittings on the core, but it all fit).

There is no additional modification or deviation from our standard install to allow Stillen Gen 3 intakes.

I hope this helps. :tup: