My new HPS post MAF tubes installed

'10Anamoly · 02-14-2011, 10:41 AM

Agreed, but most of the gains are in the exhaust dept, the intake is pretty open as is with a direct cold air feed too. I've seen Stillen intakes make 6 hp up top and lose midrange so I do not see 12whp for just tubes at all.

5whp is believable though.

GZ3 · 02-14-2011, 01:27 PM

Quote:

Originally Posted by '10Anamoly

Agreed, but most of the gains are in the exhaust dept, the intake is pretty open as is with a direct cold air feed too. I've seen Stillen intakes make 6 hp up top and lose midrange so I do not see 12whp for just tubes at all.

5whp is believable though.

I just posted my results on the same dyno where i got my baseline. Outside temp was about 70 both times and oil temp was about 180...Did 3 pulls after my mods (hps + AFE filter) and all 3 pulls net 285rwhp. the 370Z seems to be very consistent. I just got my ART pipes installed awhile back and waitng for my dyno here hopefully this week. If you cant believe 285 from 273, then i wonder what you will feel like when i break 300 with these pipes...am just being optimistic

cujo · 02-17-2011, 12:19 PM

I just sent my order last night and it's back ordered at this point

Not sure how long this will take....

chops · 02-17-2011, 07:59 PM

Quote:

Originally Posted by cujo

I just sent my order last night and it's back ordered at this point

Not sure how long this will take....

mines been back ordered for almost 3 weeks.....

Mr. Q · 02-18-2011, 12:03 PM

Any reason not to get the cobb tubes? Those were in stock

GZ3 · 02-18-2011, 12:53 PM

Quote:

Originally Posted by Mr. Q

Any reason not to get the cobb tubes? Those were in stock

last i heard they were out and no plans to remake. When i was looking they only had blue too

Mr. Q · 02-18-2011, 01:41 PM

I guess I got near the last ones then plus my car is blue. Any chance the ones for the 350 fit ours cause they still have those

Machine · 02-18-2011, 09:12 PM

Ordered from Corsport this passed Thursday, received today, and installed this evening. I didn't remove the strut tower brace and really didn't feel this was that difficult, I got lucky I guess. No need to trim these, as instructions mention, perfect fit. I also have the AFE dry filters. Butt-dyno approved.

GZ3 · 02-18-2011, 09:29 PM

Quote:

Originally Posted by Machine

Ordered from Corsport this passed Thursday, received today, and installed this evening. I didn't remove the strut tower brace and really didn't feel this was that difficult, I got lucky I guess. No need to trim these, as instructions mention, perfect fit. I also have the AFE dry filters. Butt-dyno approved.

Good Man! thats my exact intake set up

cujo · 02-18-2011, 09:48 PM

Don't remove the strut tower, just lube it with a little KY Jelly...Any works with KY Jelly ha ha

Mr. Q · 02-18-2011, 10:13 PM

Quote:

Originally Posted by cujo

Don't remove the strut tower, just lube it with a little KY Jelly...Any works with KY Jelly ha ha

I didn't remove the strut tower and had no lube but a little sweet talking and a lot of force and she finally gave in. Wait what are we talking about? Also the Cobb tubes just came in a box with a receipt and no instructions only in hindsight did I think it would have been easier without the tower there, and now KY

TonyBPD · 02-20-2011, 02:59 PM

A mistake was made somewhere during the packaging. I just took a look at mine and they are different with different part numbers.

Red__Zed · 02-23-2011, 10:19 AM

ahhh...they're back-ordered everywhere...

Mr. Q · 02-23-2011, 10:49 PM

If the AFE part# is 31-10173 then you get two in a package.

darrinps · 02-26-2011, 12:42 AM

Quote:

Originally Posted by Mr. Q

If the AFE part# is 31-10173 then you get two in a package.

I do not think you are correct. Am pretty sure that is the single filter.

The dual filter package is 31-10196

02-14-2011, 10:41 AM	#1 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Agreed, but most of the gains are in the exhaust dept, the intake is pretty open as is with a direct cold air feed too. I've seen Stillen intakes make 6 hp up top and lose midrange so I do not see 12whp for just tubes at all. 5whp is believable though. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

02-17-2011, 12:19 PM	#3 (permalink)
cujo Base Member Join Date: Nov 2010 Location: California Posts: 99 Drives: 2010 370z Roadster Rep Power: 15	I just sent my order last night and it's back ordered at this point Not sure how long this will take.... __________________ Brilliant Silver/Roadster/Touring/6MT/Fast Intentions.

02-18-2011, 09:48 PM	#10 (permalink)
cujo Base Member Join Date: Nov 2010 Location: California Posts: 99 Drives: 2010 370z Roadster Rep Power: 15	Don't remove the strut tower, just lube it with a little KY Jelly...Any works with KY Jelly ha ha __________________ Brilliant Silver/Roadster/Touring/6MT/Fast Intentions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB Tuning Post MAF Tubes	hfrog355	Exhaust/Intake	1	03-03-2011 04:37 PM
FS: Cobb Post-MAF intake tubes (Black)	ArtVandaleigh	Parts for sale (Private Classifieds)	4	10-04-2010 10:14 PM
WTB: COBB post-Maf tubes - Black	kielbasa16	Parts for sale (Private Classifieds)	10	07-29-2010 09:05 AM
FS: Cobb Black Silicone Post-MAF Tubes	'10Anamoly	Parts for sale (Private Classifieds)	21	07-16-2010 07:39 AM

02-18-2011, 12:03 PM	#5 (permalink)
Mr. Q Enthusiast Member Join Date: Dec 2009 Location: Texas Posts: 349 Drives: 09 MB 370z Rep Power: 16	Any reason not to get the cobb tubes? Those were in stock

02-18-2011, 01:41 PM	#7 (permalink)
Mr. Q Enthusiast Member Join Date: Dec 2009 Location: Texas Posts: 349 Drives: 09 MB 370z Rep Power: 16	I guess I got near the last ones then plus my car is blue. Any chance the ones for the 350 fit ours cause they still have those

02-18-2011, 09:12 PM	#8 (permalink)
Machine Base Member Join Date: Jul 2010 Location: Alabama Posts: 16 Drives: 94 Z32, 09 Z34 Rep Power: 16	Ordered from Corsport this passed Thursday, received today, and installed this evening. I didn't remove the strut tower brace and really didn't feel this was that difficult, I got lucky I guess. No need to trim these, as instructions mention, perfect fit. I also have the AFE dry filters. Butt-dyno approved.

02-20-2011, 02:59 PM	#12 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 18	A mistake was made somewhere during the packaging. I just took a look at mine and they are different with different part numbers.

02-23-2011, 10:19 AM	#13 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 121	ahhh...they're back-ordered everywhere...

02-23-2011, 10:49 PM	#14 (permalink)
Mr. Q Enthusiast Member Join Date: Dec 2009 Location: Texas Posts: 349 Drives: 09 MB 370z Rep Power: 16	If the AFE part# is 31-10173 then you get two in a package.