My new HPS post MAF tubes installed

VaGntlmn · 10-22-2010, 03:27 PM

The K&N Short Intakes that I installed didn't have that extra chamber either.
I wouldn't worry about it.
It might have to do with noise reduction. I think the car is a lot louder when I stomp it.

PR370z · 11-09-2010, 03:08 PM

ordered these today from corsport, well see how it goes

Motordyne · 01-26-2011, 03:33 PM

Quote:

Originally Posted by shabarivas

Looks good but would look better w/out that silver crap on the strut bar

I was just about to say the pin striping looks good.

kenchan · 10-22-2010, 01:56 PM

hey looks good, AZ.

One_Quick_Z · 10-23-2010, 10:31 AM

Congrats on the install!

I have a set of these coming monday in the mail!

DAN

ProfessorDave · 10-23-2010, 12:15 PM

Nice! Interested in hearing about your impressions as you do more driving. I, too, along with the K&N drop-ins would probably only consider this option as far as intake mods go.

LightsOut · 11-05-2010, 11:04 AM

hummm... I've been interested in doing this for awhile now.

I have takeda intakes and if this feels better, I just might be selling my intake.

GZ3 · 11-05-2010, 11:18 AM

bamboozled**

XwChriswX · 11-05-2010, 01:57 PM

I have a similar setup, I went K&N's as well, but I got a good deal on a set of black Cobb tubes so I snatched those up.

The stock intakes are actually pretty maxed out. This is why I couldn't see dropping $400-500 for a full up aftermarket intake...

I'm hoping to get a Dyno done here soon to see how my setup is pre-tuning.

GZ3 · 11-05-2010, 02:01 PM

Quote:

Originally Posted by XwChriswX

I have a similar setup, I went K&N's as well, but I got a good deal on a set of black Cobb tubes so I snatched those up.

The stock intakes are actually pretty maxed out. This is why I couldn't see dropping $400-500 for a full up aftermarket intake...

I'm hoping to get a Dyno done here soon to see how my setup is pre-tuning.

+1, just improving on the design a little is really all you need...I got the HPS hoses, and now the AFE dry flow dropins...dont really know where to improve after this.....!?!

XwChriswX · 11-05-2010, 02:30 PM

Quote:

Originally Posted by GZ3

+1, just improving on the design a little is really all you need...I got the HPS hoses, and now the AFE dry flow dropins...dont really know where to improve after this.....!?!

F.I. Exhaust

Jordo! · 11-05-2010, 08:42 PM

I too have a set on order. Will dyno to see if there are any gains.

Philipp · 11-18-2010, 09:10 PM

Quote:

Originally Posted by Jordo!

I too have a set on order. Will dyno to see if there are any gains.

Jordo!
Did you got your order & dyno feedback?
Phil

Jordo! · 11-19-2010, 06:06 AM

Quote:

Originally Posted by Philipp

Jordo!
Did you got your order & dyno feedback?
Phil

Intake tubes should be here tomorrow -- will dyno as soon as I get them on. Probably by next week... will post details in the Proven Power Dyno Database thread.

NISMOFO · 01-26-2011, 02:48 PM

Quote:

Originally Posted by Jordo!

Intake tubes should be here tomorrow -- will dyno as soon as I get them on. Probably by next week... will post details in the Proven Power Dyno Database thread.

Did you ever post dyno results?

10-22-2010, 03:27 PM	#1 (permalink)
VaGntlmn Enthusiast Member Join Date: May 2010 Location: Centreville, Va Age: 65 Posts: 378 Drives: '10 Tour/Sport, 6MT Rep Power: 17	The K&N Short Intakes that I installed didn't have that extra chamber either. I wouldn't worry about it. It might have to do with noise reduction. I think the car is a lot louder when I stomp it. __________________ Bill 2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq. To view a list of my mods, click here; To view a photo journal of the mods, click here.

11-09-2010, 03:08 PM	#2 (permalink)
PR370z Base Member Join Date: Jun 2010 Location: Puerto Rico Posts: 108 Drives: 2008 BMW E60 M5 Rep Power: 16	ordered these today from corsport, well see how it goes __________________ MODS:293 Whp/ 246 Tq K&N drop ins, ERZ HFC, JIC-Magic Y Pipe, HPS post MAF tubes, Nismo shift knob, 30% tints, JDM rear fog light more to come!

10-23-2010, 10:31 AM	#5 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 221	Congrats on the install! I have a set of these coming monday in the mail! DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

10-23-2010, 12:15 PM	#6 (permalink)
ProfessorDave A True Z Fanatic Join Date: Jul 2010 Location: Scranton, PA Posts: 1,580 Drives: In the fairway Rep Power: 20	Nice! Interested in hearing about your impressions as you do more driving. I, too, along with the K&N drop-ins would probably only consider this option as far as intake mods go. __________________ Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB Everything else: 2009 370z, PW Touring 6MT

11-05-2010, 11:18 AM	#8 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 23	bamboozled** __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

10-22-2010, 01:56 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	hey looks good, AZ.

11-05-2010, 11:04 AM	#7 (permalink)
LightsOut Base Member Join Date: Nov 2010 Location: 323-909 Posts: 68 Drives: Low n Aggressive 4Dr Rep Power: 16	hummm... I've been interested in doing this for awhile now. I have takeda intakes and if this feels better, I just might be selling my intake.

11-05-2010, 01:57 PM	#9 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	I have a similar setup, I went K&N's as well, but I got a good deal on a set of black Cobb tubes so I snatched those up. The stock intakes are actually pretty maxed out. This is why I couldn't see dropping $400-500 for a full up aftermarket intake... I'm hoping to get a Dyno done here soon to see how my setup is pre-tuning. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

11-05-2010, 08:42 PM	#12 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 420	I too have a set on order. Will dyno to see if there are any gains. __________________ Enjoy it. Destroy it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB Tuning Post MAF Tubes	hfrog355	Exhaust/Intake	1	03-03-2011 04:37 PM
FS: Cobb Post-MAF intake tubes (Black)	ArtVandaleigh	Parts for sale (Private Classifieds)	4	10-04-2010 10:14 PM
WTB: COBB post-Maf tubes - Black	kielbasa16	Parts for sale (Private Classifieds)	10	07-29-2010 09:05 AM
FS: Cobb Black Silicone Post-MAF Tubes	'10Anamoly	Parts for sale (Private Classifieds)	21	07-16-2010 07:39 AM