Stillen Exhaust with Berk HFCs

Minicobra1 · 03-10-2009, 02:58 AM

Quote:

Originally Posted by MaximumPwr

Sounds real good Semtex. I can't wait to install my BERK HFC's. I didn't have time this weekend. To much yard work to start on. It's just that time of year. But I did install Jim Wolf Popchargers since that only took about an hour. Those with HFC's and my Nismo exhaust. Should sound good and clean. Maybe next weekend.

I also have the Nismo exhaust and I'm thinking of ordering the Berks and JWT intakes, so please post up a video as soon as possible. Rep points are waiting

semtex · 03-10-2009, 07:44 AM

Quote:

Originally Posted by mattkim85

do they seriously pull you over if you have an aftermarket exhaust?

Yes, RDGR12 please elaborate on what you mean by 'visual inspection'. It's not like these things are huge or anything. In fact, I doubt anyone would even notice unless they're familiar with the 370 and are intentionally looking at the tips.

kustomZ · 03-10-2009, 07:51 AM

I don't think he's talking about the police pulling you over for aftermarket parts. He's talking about getting the car inspected....they'll go over the car visually to make sure all the parts are oem.

I had an inspector hassle me over my high-flow cats on the truck. In the end though he passed me, because he said he couldn't prove anything.

semtex · 03-10-2009, 08:00 AM

Hmm...interesting. I guess they really are brutal out in CA huh? In GA they just hook up a cable to your OBDII plug and check for any recent CELs. As long as you don't have any, you're good to go! They don't look under the car or anything.

bullitt5897 · 03-10-2009, 08:27 AM

Thank you GA! hey Semtex you were supposed to call me lol I had the camera sitting in the car the past few days! Ohhh I am also going over to Forged this weekend to meet up with sharif

we are going to test fit volks in a bunch of different offsets as well as get a baseline dyno

You can tag along if you would like hehe

semtex · 03-10-2009, 08:40 AM

Quote:

Originally Posted by bullitt5897

Thank you GA! hey Semtex you were supposed to call me lol I had the camera sitting in the car the past few days! Ohhh I am also going over to Forged this weekend to meet up with sharif

we are going to test fit volks in a bunch of different offsets as well as get a baseline dyno

You can tag along if you would like hehe

I don't think I got a response from you to my PM. (You didn't just reply via email, did you?) PM me your number. My wife is out of town this weekend, so I might just tag along with you to Forged!

arcticreaver · 03-11-2009, 12:08 AM

Quote:

Originally Posted by semtex

They are 49 state compliant, with California being the odd man out (go figure). Shouldn't be a problem with emissions. Keep in mind that these are actual catalytic converters -- they're just higher flowing ones is all. It's not like they're test pipes with no substrate material to filter the emissions. You can also look at Berk's website if you want more info.

just check out your vids man!! sweet!!! i really digg the sound!

that and living CA is turning out to be a problem with the mods i want to do to my 370z.

semtex · 03-12-2009, 07:08 PM

I took another video from the inside. I used a different camera this time -- one that doesn't have that annoying high-pitched hum. This one's a longer one; I just kept it rolling from the time I left my driveway to when I return.

kustomZ · 03-12-2009, 07:19 PM

Honestly, there were a few times when it sounded like a V-8. Sounds good bro..

RCZ · 03-13-2009, 05:07 PM

OK, I like the Stillen now. Sounds GREAT!

Thanks very much for taking the time to upload. I would give you more rep but it wont let me.

ZforMe · 03-14-2009, 08:35 AM

Can someone tell me if I'm hearing drone in this latest video, or is it just because the camera is in the back near the exhaust? Sounds awesome during acceleration!

370z4Steve · 03-14-2009, 06:06 PM

not bad at all..get a dyno of thecar now

semtex · 03-16-2009, 07:03 AM

Quote:

Originally Posted by 370z4Steve

not bad at all..get a dyno of thecar now

Per my OP, I will be getting a dyno after I get the Stillen G3 intakes installed.

JohnnyBgood · 03-18-2009, 10:11 AM

Hey, Semtex. Thanks for the great write up. Ordered the exhaust and cats yesterday. Can't wait to get them on.

semtex · 03-18-2009, 01:36 PM

Cool. I think you'll be pleased with the results.

03-10-2009, 07:51 AM	#48 (permalink)
kustomZ Base Member Join Date: Mar 2009 Location: Texas Posts: 112 Drives: TBD Rep Power: 256	I don't think he's talking about the police pulling you over for aftermarket parts. He's talking about getting the car inspected....they'll go over the car visually to make sure all the parts are oem. I had an inspector hassle me over my high-flow cats on the truck. In the end though he passed me, because he said he couldn't prove anything. __________________

03-10-2009, 08:00 AM	#49 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Hmm...interesting. I guess they really are brutal out in CA huh? In GA they just hook up a cable to your OBDII plug and check for any recent CELs. As long as you don't have any, you're good to go! They don't look under the car or anything. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-12-2009, 07:08 PM	#53 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Extended Drive Video I took another video from the inside. I used a different camera this time -- one that doesn't have that annoying high-pitched hum. This one's a longer one; I just kept it rolling from the time I left my driveway to when I return. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-12-2009, 07:19 PM	#54 (permalink)
kustomZ Base Member Join Date: Mar 2009 Location: Texas Posts: 112 Drives: TBD Rep Power: 256	Honestly, there were a few times when it sounded like a V-8. Sounds good bro.. __________________

03-13-2009, 05:07 PM	#55 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	OK, I like the Stillen now. Sounds GREAT! Thanks very much for taking the time to upload. I would give you more rep but it wont let me. Last edited by RCZ; 03-13-2009 at 05:09 PM.

03-10-2009, 08:27 AM	#50 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Thank you GA! hey Semtex you were supposed to call me lol I had the camera sitting in the car the past few days! Ohhh I am also going over to Forged this weekend to meet up with sharif we are going to test fit volks in a bunch of different offsets as well as get a baseline dyno You can tag along if you would like hehe

03-14-2009, 08:35 AM	#56 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Can someone tell me if I'm hearing drone in this latest video, or is it just because the camera is in the back near the exhaust? Sounds awesome during acceleration!

03-14-2009, 06:06 PM	#57 (permalink)
370z4Steve Base Member Join Date: Jan 2009 Location: west Posts: 231 Drives: 370z Rep Power: 672	not bad at all..get a dyno of thecar now

03-18-2009, 10:11 AM	#59 (permalink)
JohnnyBgood Base Member Join Date: Mar 2009 Location: Austin Posts: 55 Drives: 2016 Sport Tech 7AT Rep Power: 16	Hey, Semtex. Thanks for the great write up. Ordered the exhaust and cats yesterday. Can't wait to get them on.

03-18-2009, 01:36 PM	#60 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Cool. I think you'll be pleased with the results. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Berk Technology HFC Install	M.Bonanni	DIY Section (Do-It-Yourself)	203	08-03-2018 05:12 AM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Berk Technology HFCs gain +19whp + 18wtq!	M.Bonanni	Intake/Exhaust	73	08-13-2010 09:52 PM
STILLEN 370Z Dual Cat-Back Stainless Exhaust System	sktvietdragon	Intake/Exhaust	103	05-09-2009 06:06 PM
STILLEN Exhaust & Gen 3 Intake Dynos - 18hp Each!	Josh@STILLEN	Intake/Exhaust	96	03-09-2009 03:33 PM