HFC Gasket?

woodsjo3 · 08-13-2010, 11:55 AM

BTW this forum rocks. I just purchased my first mod. Well a used mod. I purchased a BERK HFC. My question is, can I reuse the old gasket or do I have to pay another $27 for Berk to send me a new one. I'll pay if it will leak. Or can I pick up one at a local autozone? Thanks for the help again!

G37sHKS · 08-13-2010, 12:00 PM

You can reuse them. But if they are burned or if there is any leak after leak testing then get new gasket

christian370z · 08-13-2010, 03:38 PM

You will need to use the new gasket supplied with the Berk HFCs from the header connection with the HFCs. There is no gasket stock because there is a bevelled edge with the stock cats that seal to the headers. The Berks do not have this and therefore will leak like crazy (ask me how I know).

Just use the supplied gaskets.

Trips · 08-13-2010, 03:56 PM

Quote:

Originally Posted by christian370z

You will need to use the new gasket supplied with the Berk HFCs from the header connection with the HFCs. There is no gasket stock because there is a bevelled edge with the stock cats that seal to the headers. The Berks do not have this and therefore will leak like crazy (ask me how I know).

Just use the supplied gaskets.

That is correct, it's always a good thing to replace used gaskets to insure no leaks. Have Fun

08-13-2010, 11:55 AM	#1 (permalink)
woodsjo3 Base Member Join Date: Jun 2010 Location: Baton Rouge Posts: 31 Drives: 2010 Nissan 370z Rep Power: 14	HFC Gasket? BTW this forum rocks. I just purchased my first mod. Well a used mod. I purchased a BERK HFC. My question is, can I reuse the old gasket or do I have to pay another $27 for Berk to send me a new one. I'll pay if it will leak. Or can I pick up one at a local autozone? Thanks for the help again!

08-13-2010, 03:38 PM	#3 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	You will need to use the new gasket supplied with the Berk HFCs from the header connection with the HFCs. There is no gasket stock because there is a bevelled edge with the stock cats that seal to the headers. The Berks do not have this and therefore will leak like crazy (ask me how I know). Just use the supplied gaskets. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crush gasket needed?	SlikNik	Nissan 370Z General Discussions	17	07-20-2010 03:35 PM
Those who installed HFC's, is there a factory gasket between the header and cat?	rsximus	Intake/Exhaust	6	04-05-2010 08:22 PM
Header-Downpipe gasket & Stillen CBE Allignment	DannyGT	Intake/Exhaust	21	04-24-2009 11:35 AM

08-13-2010, 12:00 PM	#2 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	You can reuse them. But if they are burned or if there is any leak after leak testing then get new gasket