please help (takeda,injen,stillen?)

Huan'z · 04-18-2010, 10:55 PM

just got my car couple days. plan to buy a intake for my new Z
so please help me out if which one is a good one.. i think takeda is the cheapest one.. next the injen and the most expensive one is the stillen.. so friends give some idea please!! thanks!!

Diocletian · 04-18-2010, 11:08 PM

Stay away from Takeda. Their SRI setup actually lowers performance because of the design. It ends up extracting air from the already hot engine bay. Injen's intakes are theoretically better. They are long and gradually curve, offering better air flow. The Stillen G3's are evenly matched, but I wasn't impressed by the complete package.

Keep in mind with either intake you won't notice any performance increase until close to 7k RPM. Just do a search on here to pull up some dyno sheets.

efuseakay · 04-19-2010, 12:22 AM

Check out R2c as well...

k20z3 · 04-19-2010, 12:33 AM

Agrees with Second post they have issues with MAF from what I've read.

Stillen makes A SOLID product for V6's in my opinion I'd go with that but the injen and stllen are so close!

kevin.z · 04-19-2010, 02:32 AM

none of them, just get drop-ins call it a day.

Daishi · 04-19-2010, 07:08 AM

If you wanna grt a cold air def go injen.. They fit right the first time without modifications.

Huan'z · 04-19-2010, 07:26 AM

Thanks tian! Then will do the seach on the injen. And do you have to take off the from bumper to Install the injen air intake?I'm newbie here and newbie about mod the car. So friends advice please. Thanks!

Zsteve · 04-19-2010, 10:09 AM

Quote:

Originally Posted by my37z

Thanks tian! Then will do the seach on the injen. And do you have to take off the from bumper to Install the injen air intake?I'm newbie here and newbie about mod the car. So friends advice please. Thanks!

Now you do realize that the stock intakes are CAIs. They just dont look real bling bling like. So with some drop ins, good for about 5 hp, you get about as much gains as the long tubes for a 1/10th of the price. just no bling. If you want bling then any long tubes will be ok but for $500.

Red370 · 04-19-2010, 11:10 AM

Quote:

Originally Posted by Daishi

If you wanna grt a cold air def go injen.. They fit right the first time without modifications.

except for the washer fluid relocation... BTW, G3's make the most gains if you're a power whore

Diocletian · 04-19-2010, 11:56 AM

It's technically not a relo, you just replace the gargantuan washer fluid bottle with the smaller one that's included with the kit.

Though I will admit those brackets were a pain in the arse.

FuszNissan · 04-19-2010, 11:59 AM

Stillen or Injen

RCZ · 04-19-2010, 12:03 PM

Another one of these threads, SEARCH.

Stillen G3 and Injen Long tubes are the only two good options.

Huan'z · 04-19-2010, 12:06 PM

Ok guys... So injen or stillen? Will order later. So please vote or pick one for me. Thanks!!

RCZ · 04-19-2010, 12:25 PM

I have the Stillen G3 and I couldn't be happier. A lot of the folks who are making the biggest power on bolt-on mods are running Stillens. Take a look at this guy: Full Stillen Bolt Ons + Berk Cats and UpRev Tune Results...

XwChriswX · 04-19-2010, 12:37 PM

Quote:

Originally Posted by my37z

just got my car couple days. plan to buy a intake for my new Z
so please help me out if which one is a good one.. i think takeda is the cheapest one.. next the injen and the most expensive one is the stillen.. so friends give some idea please!! thanks!!

Takeda - Cheapest, lowest results
Injen - Midline in cost, good results, needs a washer fluid tank swap
Stillen - Higher end cost, higher gains, needs front end fabrication
Top Secret - Ridiculously overpriced, SRI, higher gains than Stillen (Somehow

)

04-18-2010, 10:55 PM	#1 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	please help (takeda,injen,stillen?) just got my car couple days. plan to buy a intake for my new Z so please help me out if which one is a good one.. i think takeda is the cheapest one.. next the injen and the most expensive one is the stillen.. so friends give some idea please!! thanks!!

04-18-2010, 11:08 PM	#2 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	Stay away from Takeda. Their SRI setup actually lowers performance because of the design. It ends up extracting air from the already hot engine bay. Injen's intakes are theoretically better. They are long and gradually curve, offering better air flow. The Stillen G3's are evenly matched, but I wasn't impressed by the complete package. Keep in mind with either intake you won't notice any performance increase until close to 7k RPM. Just do a search on here to pull up some dyno sheets. __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

04-19-2010, 12:33 AM	#4 (permalink)
k20z3 A True Z Fanatic Join Date: May 2009 Location: Denver CO Age: 33 Posts: 2,146 Drives: 2006 Civic SI HFP Rep Power: 404	Agrees with Second post they have issues with MAF from what I've read. Stillen makes A SOLID product for V6's in my opinion I'd go with that but the injen and stllen are so close! __________________ 2006 RALLYE RED HONDA CIVIC SI HFP Clint's Helpful Photoshop Hints!

04-19-2010, 11:56 AM	#10 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	It's technically not a relo, you just replace the gargantuan washer fluid bottle with the smaller one that's included with the kit. Though I will admit those brackets were a pain in the arse. __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

04-19-2010, 11:59 AM	#11 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Stillen or Injen __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

04-19-2010, 12:22 AM	#3 (permalink)
efuseakay Enthusiast Member Join Date: Mar 2010 Location: The DAYNGA ZONE! Posts: 404 Drives: 2010 G37xS Sedan Rep Power: 15	Check out R2c as well...

04-19-2010, 02:32 AM	#5 (permalink)
kevin.z Enthusiast Member Join Date: Oct 2009 Location: vancouver(shipping:WA Posts: 359 Drives: 09 370z M6 PGtouring Rep Power: 15	none of them, just get drop-ins call it a day.

04-19-2010, 07:08 AM	#6 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 16	If you wanna grt a cold air def go injen.. They fit right the first time without modifications.

04-19-2010, 07:26 AM	#7 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Thanks tian! Then will do the seach on the injen. And do you have to take off the from bumper to Install the injen air intake?I'm newbie here and newbie about mod the car. So friends advice please. Thanks!

04-19-2010, 12:03 PM	#12 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Another one of these threads, SEARCH. Stillen G3 and Injen Long tubes are the only two good options.

04-19-2010, 12:06 PM	#13 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Ok guys... So injen or stillen? Will order later. So please vote or pick one for me. Thanks!!

04-19-2010, 12:25 PM	#14 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	I have the Stillen G3 and I couldn't be happier. A lot of the folks who are making the biggest power on bolt-on mods are running Stillens. Take a look at this guy: Full Stillen Bolt Ons + Berk Cats and UpRev Tune Results...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help (takeda,injen,stillen?)	Huan'z	Engine & Drivetrain	17	04-24-2010 07:32 AM
Stillen or Injen	Crazy8	Intake/Exhaust	1	03-23-2010 01:26 PM
CAI thread Stillen vs. Injen	gorillanismo	Intake/Exhaust	14	11-14-2009 01:55 PM
To Stillen or Injen or AEM	jyhighsky	Intake/Exhaust	10	08-10-2009 10:18 AM