Fast Intentions exhaust and header comparison. Before and after UPRev tune (Dyno)

semtex · 04-08-2010, 01:36 PM

Yeah the measurement is just in a single gear. You've seen my dyno vids, right? If you watch closely, you can see them run up through to 5th gear quickly, then they just hold it there for a sec at like 2500 rpm while they hit the start button on the measurement software, then they floor it all the way to redline and then they're done.

XwChriswX · 04-08-2010, 01:40 PM

Quote:

Originally Posted by semtex

Yeah the measurement is just in a single gear. You've seen my dyno vids, right? If you watch closely, you can see them run up through to 5th gear quickly, then they just hold it there for a sec at like 2500 rpm while they hit the start button on the measurement software, then they floor it all the way to redline and then they're done.

I guess I just need to go to a dyno shop and have them see what my baselines are... And let them explain it to me as they do...

How much +/- will a run set you back? Say if I wanna do 3 for a good average to use as my baseline?

semtex · 04-08-2010, 01:41 PM

Quote:

Originally Posted by XwChriswX

I guess I just need to go to a dyno shop and have them see what my baselines are... And let them explain it to me as they do...

How much +/- will a run set you back? Say if I wanna do 3 for a good average to use as my baseline?

Depends on the shop. Anywhere from $70-$100 is the norm. And 3 pulls is also standard.

vipor · 04-08-2010, 01:42 PM

Quote:

Originally Posted by XwChriswX

I guess I just need to go to a dyno shop and have them see what my baselines are... And let them explain it to me as they do...

How much +/- will a run set you back? Say if I wanna do 3 for a good average to use as my baseline?

3 runs with no tuning at a shop around here is like $65. I think it allocates you like an hour and 1 technician. You can do minor things to your car in between, but that's it.

XwChriswX · 04-08-2010, 01:44 PM

Quote:

Originally Posted by vipor

3 runs with no tuning at a shop around here is like $65. I think it allocates you like an hour and 1 technician. You can do minor things to your car in between, but that's it.

Hmm, ok. That sounds reasonable right?

vipor · 04-08-2010, 01:58 PM

Quote:

Originally Posted by XwChriswX

Hmm, ok. That sounds reasonable right?

Just called another shop who has a 4WD dyno and they charge $75 for 3 runs regardless of 2WD/4WD.

EDIT: hahaha just called Jotech and they said $85 or $100 with wideband

XwChriswX · 04-08-2010, 02:00 PM

I guess I have to scavenge the west side to find a dyno shop...

vipor · 04-08-2010, 02:06 PM

Quote:

Originally Posted by XwChriswX

I guess I have to scavenge the west side to find a dyno shop...

Automotive Diagnostic Specialties - Chandler, AZ - Auto Repair, A/C, Brakes, Emissions, Computer Diagnostics, Tune Ups, Diesel Repair, Alignments
Dyno-Comp - Scottsdale, Arizona Premier Automotive Tuning | Luxury and Sports Automotive | Accessories | Performance Components

04-08-2010, 01:36 PM	#1 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 55 Posts: 5,995 Drives: People to drink Rep Power: 34	Yeah the measurement is just in a single gear. You've seen my dyno vids, right? If you watch closely, you can see them run up through to 5th gear quickly, then they just hold it there for a sec at like 2500 rpm while they hit the start button on the measurement software, then they floor it all the way to redline and then they're done. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-08-2010, 02:00 PM	#7 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	I guess I have to scavenge the west side to find a dyno shop... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions Exhaust Installed	Daishi	Intake/Exhaust	125	06-17-2010 08:04 PM
Stillen or Fast Intentions Exhaust	DirtyDave	Southern California Region	3	11-28-2009 01:38 AM
Fast Intentions RTP's & CF Mufflers & Stillen G3 Intakes+Dyno.	MrBMW	Australia/New Zealand	28	10-04-2009 07:34 PM
Fast Intentions RTP's & CF Mufflers & Stillen G3 Intakes+Dyno	MrBMW	Intake/Exhaust	36	09-30-2009 10:36 AM