Fast Intentions exhaust and header comparison. Before and after UPRev tune (Dyno)

G37sHKS · 03-24-2010, 03:13 AM

and now I have to wait again for the dyno.... grrrr!! Did i mentioned that i hate teasers!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!

kolya · 03-24-2010, 11:37 AM

First off, I'd like to thank Tony, he is truly and upstanding guy and went out of his way to make sure I was satisfied. The headers made some very significant gains in hp and torque in the midrange.

On the drive home I was really able to feel the difference. The car pulls harder and doesn't have that split second lag at around 4k rpm. After driving the car for about 400 miles I can now say I am satisfied with the results.

Sebastian at Specialty Z did a great job on the tune. He spent well over four hours making sure everything was perfect. All things considered I had a great time, learned a lot, and made my car a bit faster. Good times.

G37Sam · 03-24-2010, 11:53 AM

Quote:

Originally Posted by kolya

First off, I'd like to thank Tony, he is truly and upstanding guy and went out of his way to make sure I was satisfied. The headers made some very significant gains in hp and torque in the midrange.

On the drive home I was really able to feel the difference. The car pulls harder and doesn't have that split second lag at around 4k rpm. After driving the car for about 400 miles I can now say I am satisfied with the results.

Sebastian at Specialty Z did a great job on the tune. He spent well over four hours making sure everything was perfect. All things considered I had a great time, learned a lot, and made my car a bit faster. Good times.

Congrats, now post up some numbers

F.I. Inc. · 03-24-2010, 11:57 AM

Quote:

Originally Posted by G37Sam

Congrats, now post up some numbers

Relax, I am working on exhaust, headers, PMS and emails today. Running around like a mad man. I need to scan the dyno charts and then post them. I will get to it soon...

Thanks, Tony

BTW- what kind of dyno was your testing done on ? Meaning the brand!

XwChriswX · 03-24-2010, 11:58 AM

I reccomend the first person that they try human cloning on is Tony, he needs an assistant who works just as much as he does.

nuTinmuch · 03-24-2010, 12:00 PM

Quote:

Originally Posted by F.I. Inc.

Relax, I am working on exhaust, headers, PMS and emails today. Running around like a mad man. I need to scan the dyno charts and then post them. I will get to it soon...

Thanks, Tony

BTW- what kind of dyno was your testing done on ? Meaning the brand!

You need to really start abbreviating private messages as PMs rather than PMS.

Doesn't look too right if you are working on your PMS.

Caravanshaka · 03-24-2010, 12:02 PM

Quote:

Originally Posted by nuTinmuch

Doesn't look too right if you are working on your PMS.

F.I. Inc. · 03-24-2010, 12:03 PM

PMs, beter...

XwChriswX · 03-24-2010, 12:02 PM

Quote:

Originally Posted by nuTinmuch

You need to really start abbreviating private messages as PMs rather than PMS.

Doesn't look too right if you are working on your PMS.

F.I. Inc. · 03-24-2010, 11:55 AM

Quote:

Originally Posted by kolya

First off, I'd like to thank Tony, he is truly and upstanding guy and went out of his way to make sure I was satisfied. The headers made some very significant gains in hp and torque in the midrange.

On the drive home I was really able to feel the difference. The car pulls harder and doesn't have that split second lag at around 4k rpm. After driving the car for about 400 miles I can now say I am satisfied with the results.

Sebastian at Specialty Z did a great job on the tune. He spent well over four hours making sure everything was perfect. All things considered I had a great time, learned a lot, and made my car a bit faster. Good times.

It was great hanging with you for two days. I am glad that you are satisfied! Customer satisfaction is a HUGE part of the entire equation.

We might have something in the works as far as a cold air intake system. It is very preliminary and Dan and I were only discussing it this morning. However, if it works you will love it. Right now all the details are ultra top secret but I told you I would keep you informed before you left yesterday.

We will be up in Vegas the weekend of June 18th for my party, you know the one. I look forward to hanging and having a drink or two...

Thanks, Tony

bejan · 03-24-2010, 11:51 PM

Quote:

Originally Posted by F.I. Inc.

We might have something in the works as far as a cold air intake system. It is very preliminary and Dan and I were only discussing it this morning. However, if it works you will love it. Right now all the details are ultra top secret but I told you I would keep you informed before you left yesterday.
Thanks, Tony

Why didn't anyone get excited about this?

Tony, let me go ahead and put a deposit on your intakes! lol

I will be #1 on the FI Intake buy list for sure!

vipor · 03-25-2010, 08:20 AM

Quote:

Originally Posted by bejan

Why didn't anyone get excited about this?

Tony, let me go ahead and put a deposit on your intakes! lol

I will be #1 on the FI Intake buy list for sure!

Show me some sweet intakes to dissuade me from getting G3's. Don't be like AEM and eff up my sprayer bottle either. Gogogo

Daishi · 03-25-2010, 09:07 AM

Lol you know I'm down for the intakes too just go ahead and put me on the list alrdy lol

semtex · 03-24-2010, 12:25 PM

Quote:

Originally Posted by kolya

First off, I'd like to thank Tony, he is truly and upstanding guy and went out of his way to make sure I was satisfied. The headers made some very significant gains in hp and torque in the midrange.

On the drive home I was really able to feel the difference. The car pulls harder and doesn't have that split second lag at around 4k rpm. After driving the car for about 400 miles I can now say I am satisfied with the results.

Sebastian at Specialty Z did a great job on the tune. He spent well over four hours making sure everything was perfect. All things considered I had a great time, learned a lot, and made my car a bit faster. Good times.

Not trying to rain on the parade here, but I have to say that I find the absence of any comment on the impact of these headers on low-end torque and power somewhat conspicuous. What happened on the low end? Please tell me that the gains in the midrange didn't come at a huge expense on the low end. *keeping fingers crossed*

F.I. Inc. · 03-24-2010, 01:05 PM

Quote:

Originally Posted by semtex

Not trying to rain on the parade here, but I have to say that I find the absence of any comment on the impact of these headers on low-end torque and power somewhat conspicuous. What happened on the low end? Please tell me that the gains in the midrange didn't come at a huge expense on the low end. *keeping fingers crossed*

On the contrary, we actually picked up torque and power throughout! At the highest gap for a torque increase it was at 4300 RPM's. We had an increase of 18 FT LBS. A far as power, the highest gap increase was at 4300 as well as 5900 RPM's. That increase was around 15-16 RWH. This is just a tid bit, I promise I will post the dynos soon. As far as the tune, what we were mainly able to do is clean the A/F up which made the car safe. The timing we demanded was kicked back by the ECU and I feel higher octane fuel than our California 91 garbage will help the car perform better!

03-24-2010, 11:37 AM	#2 (permalink)
kolya Base Member Join Date: Jul 2009 Location: Las Vegas, NV Posts: 6 Drives: 09 370Z WHT 6MT Rep Power: 17	First off, I'd like to thank Tony, he is truly and upstanding guy and went out of his way to make sure I was satisfied. The headers made some very significant gains in hp and torque in the midrange. On the drive home I was really able to feel the difference. The car pulls harder and doesn't have that split second lag at around 4k rpm. After driving the car for about 400 miles I can now say I am satisfied with the results. Sebastian at Specialty Z did a great job on the tune. He spent well over four hours making sure everything was perfect. All things considered I had a great time, learned a lot, and made my car a bit faster. Good times. __________________ FI TDX, HFC, G3

03-24-2010, 11:58 AM	#5 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	I reccomend the first person that they try human cloning on is Tony, he needs an assistant who works just as much as he does. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

03-24-2010, 12:03 PM	#8 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 687	PMs, beter... __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions Exhaust Installed	Daishi	Intake/Exhaust	125	06-17-2010 08:04 PM
Stillen or Fast Intentions Exhaust	DirtyDave	Southern California Region	3	11-28-2009 01:38 AM
Fast Intentions RTP's & CF Mufflers & Stillen G3 Intakes+Dyno.	MrBMW	Australia/New Zealand	28	10-04-2009 07:34 PM
Fast Intentions RTP's & CF Mufflers & Stillen G3 Intakes+Dyno	MrBMW	Intake/Exhaust	36	09-30-2009 10:36 AM

03-24-2010, 03:13 AM	#1 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 22	and now I have to wait again for the dyno.... grrrr!! Did i mentioned that i hate teasers!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!

03-25-2010, 09:07 AM	#13 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 18	Lol you know I'm down for the intakes too just go ahead and put me on the list alrdy lol