Heat wrap Motordyne Longtube headers

ABUNAI NISMO · 03-21-2020, 12:53 PM

MOTORDYNE M370 INTAKE
MOTORDYNE CBE
MOTORDYNE LTH w/ HELMHOLTZ RESONATORS

ABUNAI NISMO · 03-21-2020, 03:49 PM

Quote:

Originally Posted by chuckie311

should of had them ceramic coated instead

shoulda, coulda, Dona! Thank you for your advice. I removed the original heat wrap sent hem out for 3 days to be ceramic coated and then did the wrap over again. Thank you!

Blizzak · 03-22-2020, 02:17 PM

Video not working

Rusty · 03-22-2020, 04:33 PM

Quote:

Originally Posted by Blizzak

Video not working

JARblue · 03-22-2020, 04:38 PM

Here is a working video link:

Quicksilvers · 03-22-2020, 11:17 PM

Congratulations if that is the exhaust sound you want from your Z. Also kudos on the oil catch cans always a good idea if you can swing it.

projectpanda · 03-23-2020, 08:51 AM

Quote:

Originally Posted by ABUNAI NISMO

shoulda, coulda, Dona! Thank you for your advice. I removed the original heat wrap sent hem out for 3 days to be ceramic coated and then did the wrap over again. Thank you!

How's the heat in the bay feel now in comparison to stock? I'm getting my headers coated soon and curious if that'll be enough to keep my floor board from getting hot.

johnnydrama · 03-23-2020, 01:17 PM

Sounds good congrats!

ABUNAI NISMO · 03-31-2020, 12:04 AM

Quote:

Originally Posted by The Real JayZ

Do you still have the infamous hiss/rasp with these headers?

I can definitely hear a hiss when warming up after cold start but after about 45 seconds. It slows and calms down considerably. After that...I would say there is an ever so slight hiss from the sound. Hope this helps
ENGINE STARTS at 50 seconds in the clip if you want to skip!

The Real JayZ · 03-31-2020, 08:38 PM

Helps tremendously... Bought some longtubes and thinking about installing especially with down time. So bizarre though, maybe a turbo would eliminate it lol

ABUNAI NISMO · 04-01-2020, 08:06 PM

Quote:

Originally Posted by The Real JayZ

Do you still have the infamous hiss/rasp with these headers?

Yes, on coldstart. Fades after warm up but still slightly hear it. It does still produce on revs as well

ABUNAI NISMO · 04-01-2020, 08:09 PM

Quote:

Originally Posted by The Real JayZ

Helps tremendously... Bought some longtubes and thinking about installing especially with down time. So bizarre though, maybe a turbo would eliminate it lol

Im talking to Aaron right now. I gave him my info. I will patiently wait! IM GOING SUPERCHARGED!

Until then, Im working on - ID1300X INJECTORS WALBORO 525 FUEL pump and CJM S1.SE fuel return system

AFTERWARD, I hope to tune with SEB at specialty Z. YAY!

JLarson · 04-02-2020, 06:25 AM

Quote:

Originally Posted by The Real JayZ

Helps tremendously... Bought some longtubes and thinking about installing especially with down time. So bizarre though, maybe a turbo would eliminate it lol

My mid mount turbo eliminated it entirely.

03-21-2020, 12:53 PM	#16 (permalink)
ABUNAI NISMO Base Member Join Date: Nov 2019 Location: Irvine Posts: 69 Drives: 2020 NISMO BLK Rep Power: 5	Full motordyne sound MOTORDYNE M370 INTAKE MOTORDYNE CBE MOTORDYNE LTH w/ HELMHOLTZ RESONATORS Last edited by ABUNAI NISMO; 03-31-2020 at 12:06 AM.

03-22-2020, 02:17 PM	#18 (permalink)
Blizzak Base Member Join Date: Oct 2019 Location: Atlanta Posts: 36 Drives: 2017 Nismo Rep Power: 3360	Video not working Rusty and Memphis370Z like this.

03-22-2020, 04:38 PM	#20 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Here is a working video link: johnnydrama and Rusty like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-22-2020, 11:17 PM	#21 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25462	Congratulations if that is the exhaust sound you want from your Z. Also kudos on the oil catch cans always a good idea if you can swing it. __________________ Mr. Clean

03-23-2020, 01:17 PM	#23 (permalink)
johnnydrama Track Member Join Date: Feb 2010 Location: Bloomington, IN Age: 39 Posts: 578 Drives: Nismo & FPace SVR Rep Power: 2231	Sounds good congrats! __________________ 358WHP/271WTQ BUILD THREAD

03-31-2020, 08:38 PM	#25 (permalink)
The Real JayZ Base Member Join Date: Feb 2020 Location: NC Posts: 60 Drives: 280z Rep Power: 5	Helps tremendously... Bought some longtubes and thinking about installing especially with down time. So bizarre though, maybe a turbo would eliminate it lol ABUNAI NISMO likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motordyne longtube headers w helmholtz resonators	ABUNAI NISMO	Member's 370Z Gallery	4	09-25-2020 09:07 AM
[FOR SALE] OBX Longtube Headers	Alberto18	Parts for sale (Private Classifieds)	5	12-03-2019 07:41 AM
[WTB] PPE longtube headers	j-rho	Parts for sale (Private Classifieds)	3	04-01-2015 06:57 PM
[WTB] WTB longtube headers SoCal	raynman9	Parts for sale (Private Classifieds)	0	07-11-2012 09:33 AM
Q. Which heat wrap should I use for rather than the heat shield?	Click	Intake/Exhaust	4	07-15-2010 11:13 AM