07-24-2017, 02:07 PM
|
#6 (permalink)
|
|
Base Member
Join Date: Mar 2016
Location: Sweden
Posts: 9
Drives: 11 370Z M6
Rep Power: 11
|
Quote:
Originally Posted by SouthArk370Z
Since the bad reading is following the sensor, I think you have diagnosed the problem - bad sensor. O2 sensors are pretty fragile and you probably damaged it when removing.
Leakage past the threads could be the cause. Put some PTFE on the threads and see if the reading comes up. Don't run like that for very long as PTFE can form poisonous gasses when it burns.
You are welcome.
You could possibly also have a bad post-cat sensor but I'd fix the pre-cat problem before worrying about it.
|
I think I was a little unclear, it was the postcat sensors I switched, and the readings followed. I haven't touched the precat sensors at all. I can't seem to find any readings in the torque app for those either.
Even though the error code doesn't have anything to do with the postcat sensor, I feel like it could be related anyway?
|
|
|
Similar Threads
4Likes
Threaded Mode
