370Z Equipped with HKS Intake System, Racing Suction Reloaded

abgyak · 03-10-2010, 11:30 AM

Hi everyone,

Just wanna share my latest Mod... the HKS Intake System, Racing Suction Reloaded... Here's some few pics:

Enjooooy!!!

Red370 · 03-10-2010, 12:34 PM

Nice looking intakes but i'm curious why you decided to go with those, more $ for less gains...

Nitex · 03-10-2010, 12:50 PM

im guessing he didnt want to cut anything? In retrospect im not sure i really feel it was needed to add the Gen 3's.

TBSS2008 · 03-10-2010, 01:36 PM

Quote:

Originally Posted by Nitex

im guessing he didnt want to cut anything? In retrospect im not sure i really feel it was needed to add the Gen 3's.

I get a lot of ? About my takeda intakes that should get rid of them I am probably losing hp. But I still managed to trap over 109mph at the drag strip with hfc and the takeda's!

Red370 · 03-10-2010, 01:43 PM

Quote:

Originally Posted by TBSS2008

I get a lot of ? About my takeda intakes that should get rid of them I am probably losing hp. But I still managed to trap over 109mph at the drag strip with hfc and the takeda's!

I wouldnt assume you lost power, you probably just didnt gain any. The HFC's were the difference maker. Plus you have an auto, they trap better than the 6MT.

abgyak · 03-10-2010, 04:37 PM

Quote:

Originally Posted by Red370

Nice looking intakes but i'm curious why you decided to go with those, more $ for less gains...

What do you mean by less gains? do you mean i lose some hp? Seriously? So what kind of advantage does this HKS intake offer?

Nitex · 03-10-2010, 05:20 PM

Quote:

Originally Posted by abgyak

What do you mean by less gains? do you mean i lose some hp? Seriously? So what kind of advantage does this HKS intake offer?

It is possible you may loose some HP when the hood is down and the car is running hot. The reason for this is due to the lack of a heat shield. Once the temperture inside the engine bay is hot, the intakes are now sucking in hot air.

With the hood up on a dyno... i bet it does gain a few HP on the top end, while losing a few on the bottom. Essentially your shifting your powerband higher in the RPM range.

I currently have Gen 3's, Stillen CBE and Berk HFC's. I do feel like i gained some up top!

Red370 · 03-10-2010, 05:51 PM

Quote:

Originally Posted by Nitex

It is possible you may loose some HP when the hood is down and the car is running hot. The reason for this is due to the lack of a heat shield. Once the temperture inside the engine bay is hot, the intakes are now sucking in hot air.

With the hood up on a dyno... i bet it does gain a few HP on the top end, while losing a few on the bottom. Essentially your shifting your powerband higher in the RPM range.

I currently have Gen 3's, Stillen CBE and Berk HFC's. I do feel like i gained some up top!

I DEFINITELY feel like I gained some up top, i have the same mods, but I also definitely feel a loss in low end torque, I'm hoping this Cobb Accessport will get my torque back. And as far as the HKS intakes, they're short rams, and without heat shields no less. Basically when the engine gets hot, they're consistently heat soaking and pulling in hot air. The Stillen and Injen intakes are positioned in such a fashion that they pull the coolest air possible, thus the huge gains they make. Hey Nitex, have you touched your intakes after a few spirited runs or after a drag? Ice cold to the touch every time i've done it, apparently they really do pull in cold air

Daishi · 03-10-2010, 06:35 PM

i have the r2c intakes and after a run my intake tubes are cold as well.. they dont get hot. only difference is the r2c intakes have heat shields vs the hks.

TonyBPD · 03-10-2010, 06:40 PM

That HKS system looks damn good though!

Endgame · 03-10-2010, 09:44 PM

Quote:

Originally Posted by Daishi

i have the r2c intakes and after a run my intake tubes are cold as well.. they dont get hot. only difference is the r2c intakes have heat shields vs the hks.

Where did you get your R2C intakes?

Daishi · 03-10-2010, 10:22 PM

Quote:

Originally Posted by Endgame

Where did you get your R2C intakes?

from a vendor on here i dont quite remember the name ill pm you as soon as i find it lol.

Zsteve · 03-10-2010, 11:15 PM

does having a bracket by the filter make it a bad thing as it cant flex when the engine torques?

Nitex · 03-11-2010, 12:35 PM

Quote:

Originally Posted by Zsteve

does having a bracket by the filter make it a bad thing as it cant flex when the engine torques?

I would assume that it depends on how loose they are. I had my mechanic fab a bracket for one side that had to much play, due to opening the core support to much. In the end i took it off as it seems its not really doing any damage moving around. I need to keep my eye on it though.

Yes i have noticed that my intake tubes are cold after some hard driving. They are definitely doing their job. I am hoping that a tune will bring me back some torque as well. I need to do some research on Cobb AP vs Uprev tune.

Red370 · 03-11-2010, 12:58 PM

I should be receiving mine tomorrow, i'll let you know how it turns out.

03-10-2010, 11:30 AM	#1 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 15	370Z Equipped with HKS Intake System, Racing Suction Reloaded Hi everyone, Just wanna share my latest Mod... the HKS Intake System, Racing Suction Reloaded... Here's some few pics: Enjooooy!!! __________________ Brunei Darussalam: Abode Of Peace Last edited by abgyak; 06-12-2011 at 07:58 PM.

03-10-2010, 12:34 PM	#2 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 295	Nice looking intakes but i'm curious why you decided to go with those, more $ for less gains... __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

03-10-2010, 11:15 PM	#13 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 21	does having a bracket by the filter make it a bad thing as it cant flex when the engine torques? __________________ 2010 LS3 C6 Silver coupe corvette

03-11-2010, 12:58 PM	#15 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 295	I should be receiving mine tomorrow, i'll let you know how it turns out. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-10-2010, 12:50 PM	#3 (permalink)
Nitex Track Member Join Date: Jan 2010 Location: Seattle Posts: 848 Drives: '13 GTI Stage 2 UNI Rep Power: 16	im guessing he didnt want to cut anything? In retrospect im not sure i really feel it was needed to add the Gen 3's.

03-10-2010, 06:35 PM	#9 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 16	i have the r2c intakes and after a run my intake tubes are cold as well.. they dont get hot. only difference is the r2c intakes have heat shields vs the hks.

03-10-2010, 06:40 PM	#10 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 16	That HKS system looks damn good though!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HKS Racing Suction Reloaded Kit Nissan 370Z: FREE SHIPPING In Stock @ INTENSEPOWER!!!	INTENSEPOWER	Exhaust/Intake	88	08-01-2014 12:31 AM
HKS Racing Suction Reloaded Kit Nissan 370Z	INTENSEPOWER	Exhaust/Intake	10	07-03-2009 09:50 PM
HKS Racing Suction Kit	BPAuto	Intake/Exhaust	11	03-09-2009 12:10 PM