Top Speed Axleback Exhaust Fitment

WELL ZED · 06-02-2016, 08:13 PM

Hi all! Just thought I would share a video that a fellow Z owner posted on youtube earlier (with his permission) on the fitment of the top speed pro 1 axleback exhaust with beveled edge tips.

https://www.youtube.com/watch?v=eCUrd2kZHHw

brancky3 · 06-02-2016, 09:32 PM

Just installed mine today too, same fitment.

Zoom370z · 06-02-2016, 10:06 PM

It looks good ! Mine looks a little off on fitment, not looking aligned ?

Sent from my SM-G920T using Tapatalk

Zoom370z · 06-02-2016, 10:06 PM

I might need to tweak it alittle

Sent from my SM-G920T using Tapatalk

WELL ZED · 06-03-2016, 08:21 PM

Getting it cut and welded now

Zoom370z · 06-04-2016, 12:45 AM

Nice

Sent from my SM-G920T using Tapatalk

brancky3 · 06-04-2016, 09:01 AM

Quote:

Originally Posted by Zoom370z

I might need to tweak it alittle

Sent from my SM-G920T using Tapatalk

Make sure you follow their instructions and tighten the nuts in the correct order.

WELL ZED · 06-04-2016, 11:01 AM

So I got it welded at a buddys shop, not the best job out there but good enough (they didnt charge me because they felt bad). Honestly though, the fact that it sticks out doesnt bother me anymore. Thoughts?

Zoom370z · 06-04-2016, 11:45 AM

Oh does anyone have a manual or the way to tighten the exhaust bolts ? I got my beluga exhaust used no hardware or manual .

Sent from my SM-G920T using Tapatalk

brancky3 · 06-04-2016, 01:29 PM

I did the right side outside nut, left side outside nut, right inside, then left inside. It looked identical to the video OP posted.

Zoom370z · 06-04-2016, 01:45 PM

This is how mine looks like :/

Sent from my SM-G920T using Tapatalk

JC-Nismo · 06-04-2016, 02:49 PM

^^^ smh..................

Zoom370z · 06-04-2016, 02:55 PM

I know right, im going to try to re-adjust the driver side side.

Sent from my SM-G920T using Tapatalk

06-02-2016, 08:13 PM	#1 (permalink)
WELL ZED Base Member Join Date: May 2016 Location: Northern Virginia Posts: 83 Drives: #822 40th Rep Power: 8	Top Speed Axleback Exhaust Fitment Hi all! Just thought I would share a video that a fellow Z owner posted on youtube earlier (with his permission) on the fitment of the top speed pro 1 axleback exhaust with beveled edge tips. https://www.youtube.com/watch?v=eCUrd2kZHHw

06-02-2016, 09:32 PM	#2 (permalink)
brancky3 Track Member Join Date: Jun 2014 Location: Greer, SC Age: 36 Posts: 754 Drives: 14 370Z Gun Metallic Rep Power: 15	Just installed mine today too, same fitment. __________________ 2014 Nissan 370z Gun Metallic 6-spd Test Pipes \| Nismo CBE \| Stillen Gen3 \| Swift springs \| Advanation Sway Bars \| RJM Clutch \| GTR DBA Premium Wheels

06-04-2016, 01:29 PM	#10 (permalink)
brancky3 Track Member Join Date: Jun 2014 Location: Greer, SC Age: 36 Posts: 754 Drives: 14 370Z Gun Metallic Rep Power: 15	I did the right side outside nut, left side outside nut, right inside, then left inside. It looked identical to the video OP posted. __________________ 2014 Nissan 370z Gun Metallic 6-spd Test Pipes \| Nismo CBE \| Stillen Gen3 \| Swift springs \| Advanation Sway Bars \| RJM Clutch \| GTR DBA Premium Wheels

06-04-2016, 02:49 PM	#12 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 12	^^^ smh.................. Last edited by JC-Nismo; 06-04-2016 at 02:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Speed Pro1 Axleback Exhaust Video	Brax_on_Brax	Intake/Exhaust	3	09-21-2014 07:48 AM
Top Speed Axleback Exhaust System For Nismo	obwebpro	Intake/Exhaust	31	04-24-2014 04:36 PM
[FOR SALE] Top Speed Pro-1 Axleback Exhaust	jburke26	Parts for sale (Private Classifieds)	17	06-27-2013 04:11 PM
Top Speed Axleback Fitment	a6walter1	Intake/Exhaust	11	04-17-2013 05:01 PM
[FOR SALE] Top Speed 370Z 09-12 Upgrade Axleback Exhaust	GDonald386	Parts for sale (Private Classifieds)	20	03-06-2013 10:40 AM

06-02-2016, 10:06 PM	#3 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	It looks good ! Mine looks a little off on fitment, not looking aligned ? Sent from my SM-G920T using Tapatalk

06-02-2016, 10:06 PM	#4 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	I might need to tweak it alittle Sent from my SM-G920T using Tapatalk

06-04-2016, 12:45 AM	#6 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	Nice Sent from my SM-G920T using Tapatalk

06-04-2016, 11:45 AM	#9 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	Oh does anyone have a manual or the way to tighten the exhaust bolts ? I got my beluga exhaust used no hardware or manual . Sent from my SM-G920T using Tapatalk

06-04-2016, 01:45 PM	#11 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	This is how mine looks like :/ Sent from my SM-G920T using Tapatalk

06-04-2016, 02:55 PM	#13 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	I know right, im going to try to re-adjust the driver side side. Sent from my SM-G920T using Tapatalk