UPDATE on AEM Intake CAI correction modules

Venom13132 · 10-01-2015, 06:11 AM

So I began having some issues with my car cutting out and found it was most likely the AEM intake correction modules. I tried removing them and ofcourse the car will barely run like that. So I contacted AEM. They have an updated module out and it is under warranty.

Old Cal. # 41-1001-01

new Cal. #41-1001-02

They will send you these for free. Just go to the "contact us" link on AEM's web page and they will get back with you within a day or so.

I have not received my new ones yet and will update when I do. Just trying to get the word out!

UPDATE!!!

Ok well they said that the cal sticker was an old one but it had the new program. I went ahead and installed the senors and they worked! So if you have the old sensors and are having issues, get the new ones!

*Disclamer*I tried to search for this but the search on here wont search for 3 letter words and I did a google search and only found 2+ year old threads on the AEM intakes. If this is old info or you already knew about it, in stead of putting a usless "I already knew this post" be helpfull and post the link to the other threads for those on here who may have not had this info yet! Thanks!

Merv · 10-01-2015, 09:58 AM

Good spot on info. I'm sure there are others that are unaware.

Venom13132 · 10-06-2015, 06:28 AM

I got the correction modules in the mail last night. They just sent me an entire new hardware kit for the Intakes. So lots of spare parts now haha. I will put the new modules in today after work and see how they do.

SS_Firehawk · 10-06-2015, 12:41 PM

Are they still only compatible with 2009-2011

Venom13132 · 10-06-2015, 02:09 PM

Quote:

Originally Posted by SS_Firehawk

Are they still only compatible with 2009-2011

Never asked since mine is a 2010

Venom13132 · 10-06-2015, 05:43 PM

they sent me the same cal number i had before. I will call them tomorrow and see what is up, and update.

Venom13132 · 10-12-2015, 07:59 AM

Ok well they said that the cal sticker was an old one but it had the new program. I went ahead and installed the senors and they worked! So if you have the old sensors and are having issues, get the new ones!

10-01-2015, 06:11 AM	#1 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 10	UPDATE on AEM Intake CAI correction modules So I began having some issues with my car cutting out and found it was most likely the AEM intake correction modules. I tried removing them and ofcourse the car will barely run like that. So I contacted AEM. They have an updated module out and it is under warranty. Old Cal. # 41-1001-01 new Cal. #41-1001-02 They will send you these for free. Just go to the "contact us" link on AEM's web page and they will get back with you within a day or so. I have not received my new ones yet and will update when I do. Just trying to get the word out! UPDATE!!! Ok well they said that the cal sticker was an old one but it had the new program. I went ahead and installed the senors and they worked! So if you have the old sensors and are having issues, get the new ones! DisclamerI tried to search for this but the search on here wont search for 3 letter words and I did a google search and only found 2+ year old threads on the AEM intakes. If this is old info or you already knew about it, in stead of putting a usless "I already knew this post" be helpfull and post the link to the other threads for those on here who may have not had this info yet! Thanks! Last edited by Venom13132; 10-12-2015 at 07:59 AM.

10-01-2015, 09:58 AM	#2 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 14	Good spot on info. I'm sure there are others that are unaware. Venom13132 likes this. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!

10-06-2015, 12:41 PM	#4 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Are they still only compatible with 2009-2011 __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camber and Toe Correction	Ire	Canada	0	05-09-2014 11:07 AM
Fuel pressure modules/ gauges	blackonorange	Forced Induction	0	11-20-2012 10:28 PM
M-Benz C300 Paint Correction	OTD	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	0	05-14-2012 06:59 PM
Carbon correction work	GaleForce	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	10	03-06-2012 12:40 PM
Paint correction of Mazdaspeed 3	Methodical4u	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	14	07-07-2011 06:34 PM

10-06-2015, 06:28 AM	#3 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 10	I got the correction modules in the mail last night. They just sent me an entire new hardware kit for the Intakes. So lots of spare parts now haha. I will put the new modules in today after work and see how they do.

10-06-2015, 05:43 PM	#6 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 10	they sent me the same cal number i had before. I will call them tomorrow and see what is up, and update.

10-12-2015, 07:59 AM	#7 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 10	Ok well they said that the cal sticker was an old one but it had the new program. I went ahead and installed the senors and they worked! So if you have the old sensors and are having issues, get the new ones!