Burning some Titanium Intakes for 370Z

kannibul · 10-27-2009, 02:09 PM

Quote:

Originally Posted by EVOR

Purpose of using Titanium is that Titanium is the best material that takes heat and lower the temp the fastest. So as hot air or engine hot air goes to it, it lowers the temp fastest. If you don't like the burned color, I can offer not burned version. It will just be chromed polished.

EDIT: just rehashed other peoples thoughts on engine bay heat and intake temps.

rednek01 · 10-27-2009, 02:32 PM

Quote:

Originally Posted by EVOR

Actually real reason is it is super light weight and looks good. This is why ARC does their stuff with titanium. Also same with lots exhaust systems.

you have got to be kidding me! weigh that intake then weigh an aluminum Takeda intake and or Stillen (if theirs is in fact aluminum) I bet you money you are talking about ounces difference. Nice try though.

The reason the exhaust is done is because its a crap load more tubing and you can save 20-30 lbs when its a full titanium exhaust ,look at the C5 and maybe later Z06's for example They used titanium exhaust in order to get just a little bit more weight savings but didn't gain much.

EVOR · 10-27-2009, 09:30 PM

Quote:

Originally Posted by rednek01

I guess I just dont get the rainbow colored titanium look...maybe I'm not JDM enough?

Exactly...

JoeD · 10-27-2009, 09:45 PM

Looks badass. Don't listen to the haters.

However, I think the biggest factor here is that they are short-ram intakes. Although it will be cost-prohibitive from a manufacturing standpoint as you are on a smaller scale than big names like Stillen and Injen...create a similar design as theirs and you will have an instant knockout.

I commend you on your recent work, though. You are putting out some very cool products.

EVOR · 10-27-2009, 10:23 PM

Quote:

Originally Posted by JoeD

Looks badass. Don't listen to the haters.

However, I think the biggest factor here is that they are short-ram intakes. Although it will be cost-prohibitive from a manufacturing standpoint as you are on a smaller scale than big names like Stillen and Injen...create a similar design as theirs and you will have an instant knockout.

I commend you on your recent work, though. You are putting out some very cool products.

Thanks. What type of intake would be more popular? Cuz these things are no molding involved. So cost of making one custom is almost same as making 10 or 20. The intake sensor are still the same. In fact intake sensor for 370Z 350Z G35 G37 are all the same.

Zsteve · 10-27-2009, 11:51 PM

I want one that just hooks up to the stock air box, Ill wait to see if you can get it ti work. Want to keep it CAI. If running smooth pipes is better than the ribbed then why dont they just make them that way?

mr_desmo · 10-28-2009, 07:19 PM

Quote:

Originally Posted by EVOR

Thanks. What type of intake would be more popular? Cuz these things are no molding involved. So cost of making one custom is almost same as making 10 or 20. The intake sensor are still the same. In fact intake sensor for 370Z 350Z G35 G37 are all the same.

ive logged on just to make you do money

People whant a stock box (which the air box are perfect) setup...burned titanium look awesome...mate your ti pipe with sensor to the existing boxes and ill buy it even if its more expensive then all the crap that got out so far....a lot of time were spent by nissan to get the box setup right and it takes air at the right place....we just dont whant the power robbing weiving plastic that silence air into the engine...your intake will sound more aggressive!

Nikon FM · 10-28-2009, 08:33 PM

Quote:

Originally Posted by mr_desmo

ive logged on just to make you do money

People whant a stock box (which the air box are perfect) setup...burned titanium look awesome...mate your ti pipe with sensor to the existing boxes and ill buy it even if its more expensive then all the crap that got out so far....a lot of time were spent by nissan to get the box setup right and it takes air at the right place....we just dont whant the power robbing weiving plastic that silence air into the engine...your intake will sound more aggressive!

I agree. Going to the stock boxes with the burnt Ti pipes would be really nice.

kenchan · 10-29-2009, 01:18 PM

maybe you can do a CF air box of the stock intake + ti piping and call it a day?

Zsteve · 10-29-2009, 07:43 PM

no CF for me I want to keep the price down.

kenchan · 10-31-2009, 12:52 PM

yet you're looking at titanium? lol

Zsteve · 10-31-2009, 01:32 PM

I know I wish they would do just a pipe to the airbox with regular piping to keep costs down but then I guess no company would want to spend time producing an inexpensive product and not make much money from it.

Modshack · 10-31-2009, 01:51 PM

Quote:

Originally Posted by Zsteve

I know I wish they would do just a pipe to the airbox with regular piping to keep costs down but then I guess no company would want to spend time producing an inexpensive product and not make much money from it.

You can do your own to the stock box with 2.75 silicone tubing. Smooth, No accordion, less heat pick-up, bigger ID, pick a color..

You'll need (2) 2.75" ID 45 degree elbos and a foot of 2.75" hose + 8 clamps. Get a few joiners (mine are custom) tap in a 1/2" pipe nipple for the PCV hook-up and you're done..
http://www.siliconeintakes.com

nogoodname · 10-31-2009, 02:20 PM

should try to make some heat shields like the R2C's intakes and then you got something

Modshack · 10-31-2009, 02:43 PM

Quote:

Originally Posted by nogoodname

should try to make some heat shields like the R2C's intakes and then you got something

My heat shields are integrated into the tubes..Powdercoated Sheet steel wrap over a Phenolic tube and 2 layers of Foil and bubble insulation.. With the fang vents, My IAT numbers look just like a G3's......

.....5 degrees over ambient at cruise..I can't see it getting any better than that as long as the MAF elements (which read IAT) are in the engine bay...Plus, there is less heat pick-up after the MAF's with the silicone in lieu of metal..

10-27-2009, 11:51 PM	#21 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	I want one that just hooks up to the stock air box, Ill wait to see if you can get it ti work. Want to keep it CAI. If running smooth pipes is better than the ribbed then why dont they just make them that way? ~37oZ~ likes this. __________________ 2010 LS3 C6 Silver coupe corvette

10-29-2009, 01:18 PM	#24 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	maybe you can do a CF air box of the stock intake + ti piping and call it a day? 370zHawaii likes this.

10-29-2009, 07:43 PM	#25 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	no CF for me I want to keep the price down. __________________ 2010 LS3 C6 Silver coupe corvette

10-31-2009, 01:32 PM	#27 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	I know I wish they would do just a pipe to the airbox with regular piping to keep costs down but then I guess no company would want to spend time producing an inexpensive product and not make much money from it. __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Faint burning smell?	spearfish25	Nissan 370Z General Discussions	50	08-19-2016 10:24 AM
MCR Titanium Exhaust for 370z 12.29.08	AK370Z	Intake/Exhaust	40	03-31-2010 06:22 AM
Titanium 370Z	NissanZ46	Nissan 370Z General Discussions	11	05-06-2009 02:19 AM
Burning Oil?	Ed In Medford	Engine & Drivetrain	8	03-23-2009 10:26 PM
ZELE: Titanium Muffler development for the 370Z 12.15.08	AK370Z	Intake/Exhaust	17	12-15-2008 03:52 PM

10-27-2009, 09:45 PM	#19 (permalink)
JoeD Banned Join Date: Aug 2009 Location: CA Posts: 495 Drives: Z Rep Power: 0	Looks badass. Don't listen to the haters. However, I think the biggest factor here is that they are short-ram intakes. Although it will be cost-prohibitive from a manufacturing standpoint as you are on a smaller scale than big names like Stillen and Injen...create a similar design as theirs and you will have an instant knockout. I commend you on your recent work, though. You are putting out some very cool products.

10-31-2009, 12:52 PM	#26 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yet you're looking at titanium? lol

10-31-2009, 02:20 PM	#29 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	should try to make some heat shields like the R2C's intakes and then you got something