Nissan 370Z Forum - Racelogic Traction Control System

Nissan 370Z Forum (http://www.the370z.com/)

- Group Buys (http://www.the370z.com/group-buys/)

- - Racelogic Traction Control System (http://www.the370z.com/group-buys/68931-racelogic-traction-control-system.html)

Quote:

Originally Posted by JMac88 (Post 2658189)

I updated the 1st page with the following

Is there anything else that I may need for install?
You will need a few things:
-You will need a spool of wire, some buttconnectors, and crimpers.
-10k resistor
-L7805 regulator or a 12v to 5v converter. I have run the L7805 for years and it is a couple of bucks. you may have a 12v to 5v if you run aftermarket sensors.
-Its also recommended that you have a laptop for easy configuration, but is not required if you have the digital adjuster.
-Patch harness (370Z/G37 (VQ37VHR) ECU Wiring Harness)

You'll notice i took out the uprev, as misfire detection has not been a problem.

If you absolutely want a harness made, we might be able to work something out. Keep in mind that I can not give you a 100% plug and play harness as some of the wires get long (the ones going from the wheelsensors back to the main sensor for instanace). You will still need to tap into certain wires as well.

As for pricing I still need to confirm nothing has changed. I would say if you budgeted $2100 that it would be more then enough. That's if you want the no lift shift, digital adjuster, ect... the full load deal.

I understand this. I don't mind tapping into those and running wires, I just don't want to cut any of my wires going to the ecu.....

Quote:

Originally Posted by fireman3361 (Post 2658204)

I understand this. I don't mind tapping into those and running wires, I just don't want to cut any of my wires going to the ecu.....

Thats what the patch harness is for, no cutting of any ecu wires required :) I have the link in my post above

Quote:

Originally Posted by JMac88 (Post 2658421)

Thats what the patch harness is for, no cutting of any ecu wires required :) I have the link in my post above

cool, I missed the link the first time around.
well not ordering anything from there till we have a for sure deal.
keep us posted

updated post 2 with a written DIY. I wrote it all at once, so I may need to make some corrections/edits later, but should give you a general idea of what's required. We will see if there is enough interest for the last two kits with that, if there is I will rip the car apart and take corresponding pictures.

So who all is in on this......

If anyone wants the canbus model I should be able to grab those as well. This would be for the AT guys or people that do not require the no lift shift. You would not need to tap any wheel speed sensors. My guess is around 1700(including all the small stuff) for everything with the canbus but need to confirm with RL

Quote:

Originally Posted by JMac88 (Post 2663528)

stuck at 3 again...

I don't see how tons of ppl are not jumping at this.....
I am not even boosted, I just hate my factory traction control....
and I plan on being boosted in the future lol

Quote:

Originally Posted by fireman3361 (Post 2663540)

I don't see how tons of ppl are not jumping at this.....
I am not even boosted, I just hate my factory traction control....
and I plan on being boosted in the future lol

make that 4 im in :tiphat:

Quote:

Originally Posted by hjo1078 (Post 2664401)

make that 4 im in :tiphat:

glad to have you, one more needed

Quote:

Originally Posted by hjo1078 (Post 2664401)

make that 4 im in :tiphat:

sweeeeeeet

so if we get one more person how much does this kit come down to ? can you pm me on this ?

Quote:

Originally Posted by hjo1078 (Post 2664428)

so if we get one more person how much does this kit come down to ? can you pm me on this ?

Prices are posted on first couple pages and I have a post in the last page or two where he tells the final price including digital controller, wiring harness, etc....

Think it's like 2100 total everything

Quote:

Originally Posted by hjo1078 (Post 2664428)

so if we get one more person how much does this kit come down to ? can you pm me on this ?

With your build you are definitely gonna want this man! I hope to see your car at ZdayZ and go for a ride!

Dude i cant wait. And this traction control def sounds like it will keep me from killing myself in my car. Lol.

@fireman: i will def read this thread more thoroughly.

Sent from my iPhone using Tapatalk