Adding throttle to start car after stillen SC install

clkio · 09-29-2014, 08:49 AM

Thanks so much Chuck, much appreciated dude. So you recommending the frozen boost heat exchanger for the kit and a CSF radiator for the car? Also, I know you said meth is not needed, but does it help with regulating the fuel and maybe push little extra ponies LOL.

Chuck33079 · 09-29-2014, 08:59 AM

Quote:

Originally Posted by clkio

Thanks so much Chuck, much appreciated dude. So you recommending the frozen boost heat exchanger for the kit and a CSF radiator for the car? Also, I know you said meth is not needed, but does it help with regulating the fuel and maybe push little extra ponies LOL.

Meth doesn't regulate jack ****. Meth adds octane to pump gas. You would have to have a map tuned for the meth where it gets leaned out to compensate and you can be more aggressive with timing. You'd gain some power and it would run cooler, but if you have a meth system failure or a clogged line or any other interruption in flow under boost you now need a new motor.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car Wont Start, Throttle Body Codes	Mitco39	Engine & Drivetrain	8	04-28-2014 10:43 AM
Z1 Motorsport oil cooler install, oil warning light at start up	peter_s	Engine & Drivetrain	27	10-31-2013 09:44 AM
Car won't start after pedal install	mwhit02	DIY Section (Do-It-Yourself)	10	08-01-2013 07:40 PM
Audio Install: Now Car Won't Start	6spd	Audio & Video	24	01-10-2012 03:47 PM
Can we start a STICKY for install materials needed?	abakja1	Audio & Video	1	09-24-2009 04:31 PM

09-29-2014, 08:49 AM	#1 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 13	Thanks so much Chuck, much appreciated dude. So you recommending the frozen boost heat exchanger for the kit and a CSF radiator for the car? Also, I know you said meth is not needed, but does it help with regulating the fuel and maybe push little extra ponies LOL.