Nissan 370Z Forum  

So just ordered my Stillen SC

Originally Posted by mikey1600 ANMVQ had upgraded to the frozenboost heat exchanger when motor popped. clkio was still running standard stillen heat exchanger when motor popped. They are talking about

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree180Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 12-29-2014, 05:26 AM   #1 (permalink)
Enthusiast Member
 
Join Date: May 2014
Location: Cambridge ON
Posts: 265
Drives: 09 370z M6
Rep Power: 12
clkio will become famous soon enough
Default

Quote:
Originally Posted by mikey1600 View Post
ANMVQ had upgraded to the frozenboost heat exchanger when motor popped.

clkio was still running standard stillen heat exchanger when motor popped.

They are talking about moving the MAF's which are currently before the supercharger to a better location as the temp probably changes between where it's measured and where the air ends up entering the engine. Not sure where the best location would be though.

Anyone ran a water/meth kit also?
I am currently working on it. I am really excited to see how much she will put down after meth as my engine is very low compression and my tuner doesn't think it will help alot with power. My engine spec
HBR performance built VQ37VHR Bore 3.7805 Stroke 3.460 Wiseco k643m96 dished 8.5:1 Pistons, Wiseco 9600 XS Rings, K1 Billet 4340 Steel H Beam connecting rods.

Z&I likes this.
clkio is offline   Reply With Quote
Old 12-29-2014, 11:27 AM   #2 (permalink)
Z&I
Enthusiast Member
 
Z&I's Avatar
 
Join Date: Feb 2013
Location: New Jersey
Posts: 410
Drives: '09 370z 6MT FI
Rep Power: 13
Z&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the rough
Default

Quote:
Originally Posted by clkio View Post
I am currently working on it. I am really excited to see how much she will put down after meth as my engine is very low compression and my tuner doesn't think it will help alot with power. My engine spec
HBR performance built VQ37VHR Bore 3.7805 Stroke 3.460 Wiseco k643m96 dished 8.5:1 Pistons, Wiseco 9600 XS Rings, K1 Billet 4340 Steel H Beam connecting rods.

Like that Photo gave me a few ideas.
Looks like you used to have woofers and now you have drywall... :-)

I will be installing the AquaMist water/meth injection.
I have the 9.5 CR Carillo pistons and rods - race bearings and ARP bolts.

Will be posting all of the particulars once the build is satisfactory completed.
__________________
.
BB

Last edited by Z&I; 12-29-2014 at 11:37 AM.
Z&I is offline   Reply With Quote
Old 12-29-2014, 09:16 PM   #3 (permalink)
Track Member
 
mikey1600's Avatar
 
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 17
mikey1600 is on a distinguished road
Default

Quote:
Originally Posted by clkio View Post
I am currently working on it. I am really excited to see how much she will put down after meth as my engine is very low compression and my tuner doesn't think it will help alot with power. My engine spec
HBR performance built VQ37VHR Bore 3.7805 Stroke 3.460 Wiseco k643m96 dished 8.5:1 Pistons, Wiseco 9600 XS Rings, K1 Billet 4340 Steel H Beam connecting rods.

8.5:1?! holy hell man that's low. have you tuned the kit with the new engine build yet or still in the making? are you looking to go much higher psi than just the upgraded impeller?
mikey1600 is offline   Reply With Quote
Old 01-04-2015, 05:06 PM   #4 (permalink)
Enthusiast Member
 
Join Date: May 2014
Location: Cambridge ON
Posts: 265
Drives: 09 370z M6
Rep Power: 12
clkio will become famous soon enough
Default

Quote:
Originally Posted by mikey1600 View Post
8.5:1?! holy hell man that's low. have you tuned the kit with the new engine build yet or still in the making? are you looking to go much higher psi than just the upgraded impeller?
You see mikey, I bought a used supercharger kit from g37 forums and the kit had all the upgrades done to to it (pushing 12.5 psi) on the stock engine, car was making around 480whp and 357 torque, I went ahead and installed the meth kit but didnt tune yet. After few days of driving with the supercharger, engine blew (before I got to tune for meth) so I found a great deal on the rebuild engine I have right now. Unfortunatly, car made less power 462whp but made 380 torque but still not tuned for meth. I will be running meth around March and see how it goes. If I am not happy with the setup at the end, I will be removing the supercharger, selling it and buy a TT as the built engine i have now is better for a turbo setup.
clkio is offline   Reply With Quote
Old 01-04-2015, 09:10 PM   #5 (permalink)
Track Member
 
mikey1600's Avatar
 
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 17
mikey1600 is on a distinguished road
Default

Quote:
Originally Posted by clkio View Post
You see mikey, I bought a used supercharger kit from g37 forums and the kit had all the upgrades done to to it (pushing 12.5 psi) on the stock engine, car was making around 480whp and 357 torque, I went ahead and installed the meth kit but didnt tune yet. After few days of driving with the supercharger, engine blew (before I got to tune for meth) so I found a great deal on the rebuild engine I have right now. Unfortunatly, car made less power 462whp but made 380 torque but still not tuned for meth. I will be running meth around March and see how it goes. If I am not happy with the setup at the end, I will be removing the supercharger, selling it and buy a TT as the built engine i have now is better for a turbo setup.
fair enough, thought you would have lost a lot of power going from 11:1 to 8.5:1, turbo setup sounds good, I'm still torn about doing all the changes to mine now, probably too much $$ compared to the gains. Still waiting on pricing back from vortech supplier here in Aus to do the upgrades
mikey1600 is offline   Reply With Quote
Old 01-05-2015, 06:04 AM   #6 (permalink)
Enthusiast Member
 
Join Date: May 2014
Location: Cambridge ON
Posts: 265
Drives: 09 370z M6
Rep Power: 12
clkio will become famous soon enough
Default

Quote:
Originally Posted by mikey1600 View Post
fair enough, thought you would have lost a lot of power going from 11:1 to 8.5:1, turbo setup sounds good, I'm still torn about doing all the changes to mine now, probably too much $$ compared to the gains. Still waiting on pricing back from vortech supplier here in Aus to do the upgrades
Out of curiosity, how much is this going to cost you? Dont get caught up with the numbers because uou are absolutely right about the $$ going to be spent vs the gains. Extra 60hp will cost you maybe 2000? Why don't you sell your setup all together to a turbo? The reason I ask is I bought the stillen kit used of the forums for $4k with all the upgrades done as well as walbro 340 fuel pump and 1000CC injectors which was the best deal at that time. Personally, I wouldnt put the money on rebuilding the kit since I am spending thousands, you want more power, sell the kit and buy a TT because the thousands you going to spend here will yield you a lot more gains than 60hp.
clkio is offline   Reply With Quote
Old 01-05-2015, 04:52 PM   #7 (permalink)
Track Member
 
mikey1600's Avatar
 
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 17
mikey1600 is on a distinguished road
Default

Quote:
Originally Posted by clkio View Post
Out of curiosity, how much is this going to cost you? Dont get caught up with the numbers because uou are absolutely right about the $$ going to be spent vs the gains. Extra 60hp will cost you maybe 2000? Why don't you sell your setup all together to a turbo? The reason I ask is I bought the stillen kit used of the forums for $4k with all the upgrades done as well as walbro 340 fuel pump and 1000CC injectors which was the best deal at that time. Personally, I wouldnt put the money on rebuilding the kit since I am spending thousands, you want more power, sell the kit and buy a TT because the thousands you going to spend here will yield you a lot more gains than 60hp.
yeah I hear what you are saying, it's going to be easily over $2k for the upgrades, no idea on HP gain really at the end of the day.

only kit I can get here in Aus is $10.5k and it's basically the exact same as the original GTM stage 1 kit, which for me is just way overpriced, none of the other US kits will fit the RHD setup. So would really have to get someone local to do a turbo setup, aka guinea pig, which I really don't want to be around here.. so unfortunately it's kind of do these upgrades or nothing really.
mikey1600 is offline   Reply With Quote
Old 01-05-2015, 09:00 PM   #8 (permalink)
Enthusiast Member
 
Join Date: May 2014
Location: Cambridge ON
Posts: 265
Drives: 09 370z M6
Rep Power: 12
clkio will become famous soon enough
Default

Quote:
Originally Posted by mikey1600 View Post
yeah I hear what you are saying, it's going to be easily over $2k for the upgrades, no idea on HP gain really at the end of the day.

only kit I can get here in Aus is $10.5k and it's basically the exact same as the original GTM stage 1 kit, which for me is just way overpriced, none of the other US kits will fit the RHD setup. So would really have to get someone local to do a turbo setup, aka guinea pig, which I really don't want to be around here.. so unfortunately it's kind of do these upgrades or nothing really.
I am almost 100% certain your stock engine will not lost long if you upgrade that kit so here goes another 5-7k. Enjoy the car mikey, the headache and agony that I went through when my engine went and thousands spent was not worth the little extra power.
clkio is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Just ordered my Stillen CBE carmelvalleyZ Intake/Exhaust 12 03-23-2014 02:20 PM
Just ordered a 1LE 280z/300zx Other Vehicles 4 08-18-2013 01:05 PM
Just ordered Stillen gen 3 cai henryy370z Intake/Exhaust 3 08-02-2012 09:03 PM
just ordered! nj2alaska New 370Z Owner 9 07-21-2011 03:18 AM
Stillen CBE and Berk HFC ordered Nitex Intake/Exhaust 19 02-07-2010 07:45 AM


All times are GMT -5. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2