Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Reflections on GTM over the years (http://www.the370z.com/forced-induction/90996-reflections-gtm-over-years.html)

bullitt5897 02-20-2015 08:48 AM

Actually my car was sitting on a lift with not much being done during that time so I have no clue where that money went...

FPenvy 02-20-2015 08:50 AM

Quote:

Originally Posted by bullitt5897 (Post 3117397)
Actually my car was sitting on a lift with not much being done during that time so I have no clue where that money went...

i know but for joke purposes i had to use your car as an example lol

i mean it is one of what 3 cars that actually made it out alive. :roflpuke2:

bullitt5897 02-20-2015 08:51 AM

Yeah and I have to thank the Tech for all the extra hours he put in off the books to get me out alive!

To him I say Thanks!

FPenvy 02-20-2015 08:53 AM

Quote:

Originally Posted by bullitt5897 (Post 3117402)
Yeah and I have to thank the Tech for all the extra hours he put in off the books to get me out alive!

To him I say Thanks!

i'm thankful to since i will be able to see this monster at zdayz right? :tup:

bullitt5897 02-20-2015 08:53 AM

of COURSE!!!

bullitt5897 02-20-2015 08:54 AM

All I know is my wife is going to be pissed hahaha... She is bringing our nismo and everyone is going to be all about my car!

FPenvy 02-20-2015 08:54 AM

Quote:

Originally Posted by bullitt5897 (Post 3117407)
of COURSE!!!

hell yea! i'm excited to see this in person as i'm sure you were excited to see it off a lift lol

FPenvy 02-20-2015 08:55 AM

Quote:

Originally Posted by bullitt5897 (Post 3117410)
All I know is my wife is going to be pissed hahaha... She is bringing our nismo and everyone is going to be all about my car!

normal nismo vs 4.5 stroked with 1000hp.......i mean you kinda cant be mad at the crowd going towards it

DEpointfive0 02-20-2015 11:17 AM

Quote:

Originally Posted by G37sTT (Post 3117190)
Dang Man You Too? i am on my 3rd CSF radiator as well,yeah they replaced the first 2 two..but what about $300+ in mechanics fee's +time...i picked CSF cause they had good reviews..Hopefully their newest ish is better..

And i think GTM's customer service is fine..not AMAZING..BuT not horrible..definitely Acceptable and sometimes quite well...i've been in contact with him as i am preparing to have them Built me a 4.2L Stroker Longblock,and then i might ship my car out to them to have it installed as well.He's treated me fairly,prepared my quote and for the most part answered all my questions..(an i ask alot) ...So yeah Hopefully G.T.M is doing well and Continues to do So.. as im fixing to spend almost 20grand with them, I'd Hope So..lol

Mind blowing that you'd do that. There is more than one engine builder in the U.S. I'd rather stick needles in my díck that give him 20k

njobe89 02-20-2015 11:18 AM

Quote:

Originally Posted by DEpointfive0 (Post 3117612)
Mind blowing that you'd do that. There is more than one engine builder in the U.S. I'd rather stick needles in my díck that give him 20k

:rofl2: :rofl2: :rofl2:
well damn

DEpointfive0 02-20-2015 11:20 AM

Quote:

Originally Posted by njobe89 (Post 3117616)
:rofl2: :rofl2: :rofl2:
well damn

Look, unless I made $500k a year, 20k is a lot of money to gamble on someone that can't keep his shít together and has already filed for bankruptcy.

Needle in my díck will heal faster than a $20k hole in my pocket

njobe89 02-20-2015 11:22 AM

Quote:

Originally Posted by DEpointfive0 (Post 3117621)
Look, unless I made $500k a year, 20k is a lot of money to gamble on someone that can't keep his shít together and has already filed for bankruptcy.

Needle in my díck will heal faster than a $20k hole in my pocket

unless that needle is infected with HIV :eek:

but yea, i wouldn't trust them either. that's why i said he should just give me the 20k :D

JARblue 02-20-2015 11:22 AM

Quote:

Originally Posted by DEpointfive0 (Post 3117621)
Look, unless I made $500k a year, 20k is a lot of money to gamble on someone that can't keep his shít together and has already filed for bankruptcy.

Needle in my díck will heal faster than a $20k hole in my pocket

Gay porn stars inject speed directly into their dicks to perform longer :twocents:

njobe89 02-20-2015 11:25 AM

Quote:

Originally Posted by JARblue (Post 3117627)
Gay porn stars inject speed directly into their dicks to perform longer :twocents:

aren't you just full of facts today... makes you wonder how you know that one :stirthepot:

bullitt5897 02-20-2015 11:28 AM

Quote:

Originally Posted by FPenvy (Post 3117412)
normal nismo vs 4.5 stroked with 1000hp.......i mean you kinda cant be mad at the crowd going towards it

Hers wont be a normal nismo by Zdayz... Hers is all JDM at the moment.

GaleForce 02-20-2015 11:49 AM

Quote:

Originally Posted by JARblue (Post 3117627)
Gay porn stars inject speed directly into their dicks to perform longer :twocents:

http://media.tumblr.com/tumblr_lptp0wk3TW1qc9ljx.gif

JARblue 02-20-2015 11:59 AM

Quote:

Originally Posted by njobe89 (Post 3117630)
aren't you just full of facts today... makes you wonder how you know that one :stirthepot:

Why don't you come over here and find out :nutswinger:

jwick 02-20-2015 11:59 AM

Quote:

Originally Posted by DEpointfive0 (Post 3117612)
Mind blowing that you'd do that. There is more than one engine builder in the U.S. I'd rather stick needles in my díck that give him 20k

Quote:

Originally Posted by DEpointfive0 (Post 3117621)
Look, unless I made $500k a year, 20k is a lot of money to gamble on someone that can't keep his shít together and has already filed for bankruptcy.

Needle in my díck will heal faster than a $20k hole in my pocket

Quote:

Originally Posted by JARblue (Post 3117627)
Gay porn stars inject speed directly into their dicks to perform longer :twocents:

Wow...that went downhill...of course it is a GTM thread, so no surprise

JARblue 02-20-2015 12:00 PM

Quote:

Originally Posted by jwick (Post 3117678)
Wow...that went downhill...of course it is a GTM thread, so no surprise

:confused:

I thought we were pretty on topic :stirthepot:

jwick 02-20-2015 12:03 PM

Quote:

Originally Posted by JARblue (Post 3117683)
:confused:

I thought we were pretty on topic :stirthepot:

I agree. It was on topic:tup:

bullitt5897 02-20-2015 12:04 PM

:wtf2:

FPenvy 02-20-2015 12:13 PM

Quote:

Originally Posted by bullitt5897 (Post 3117634)
Hers wont be a normal nismo by Zdayz... Hers is all JDM at the moment.

boost? :yum:

bullitt5897 02-20-2015 12:33 PM

Quote:

Originally Posted by FPenvy (Post 3117707)
boost? :yum:

We are going all NA with her's... *Cough* 4L *Cough*

theDreamer 02-20-2015 12:34 PM

Quote:

Originally Posted by bullitt5897 (Post 3117736)
we are going all na with her's... *cough* 4l *cough*

e85?

bullitt5897 02-20-2015 12:38 PM

maybe... I wont spoil the surprise... but it wont be until Znats that we get into the motor that far. Zdayz is all aero and suspension and the niceties...

FPenvy 02-20-2015 01:05 PM

Quote:

Originally Posted by bullitt5897 (Post 3117736)
We are going all NA with her's... *Cough* 4L *Cough*

Quote:

Originally Posted by bullitt5897 (Post 3117744)
maybe... I wont spoil the surprise... but it wont be until Znats that we get into the motor that far. Zdayz is all aero and suspension and the niceties...

well if it's with GTM you mean Znats 2018 right? :bowrofl:

but a stroked out NA build will be awesome. :tup:

njobe89 02-20-2015 01:11 PM

Quote:

Originally Posted by JARblue (Post 3117677)
Why don't you come over here and find out :nutswinger:

if you were in san antonio i'd consider it :roflpuke2:
Quote:

Originally Posted by bullitt5897 (Post 3117744)
maybe... I wont spoil the surprise... but it wont be until Znats that we get into the motor that far. Zdayz is all aero and suspension and the niceties...

what do you people do for a living lol. adopt me? lol

bullitt5897 02-20-2015 02:55 PM

Quote:

Originally Posted by FPenvy (Post 3117780)
well if it's with GTM you mean Znats 2018 right? :bowrofl:

but a stroked out NA build will be awesome. :tup:

Motor will be built local... that way I can personally go kick the guys A$$ if he doesnt finish in time... lol

FPenvy 02-20-2015 03:05 PM

Quote:

Originally Posted by bullitt5897 (Post 3117919)
Motor will be built local... that way I can personally go kick the guys A$$ if he doesnt finish in time... lol

very nice. looking forward to zdayz to see both cars. :tiphat:

NYBladeZ 02-21-2015 03:14 PM

Wow, that was an exhausting read. Sorry to the Z and G guys. Back in the day GTM was untouchable on this forum. No one could questions their "expertise". I hope Z Eliminator gets back on the track soon. Feels like ages when I left the forum only to find Z Eliminator and White Dragon still incomplete.

G37sTT 02-21-2015 09:42 PM

Quote:

Originally Posted by DEpointfive0 (Post 3117612)
Mind blowing that you'd do that. There is more than one engine builder in the U.S. I'd rather stick needles in my díck that give him 20k


Well im Looking for Options?..Can anyone Recommend a Shop that can do it in a reasonable time? & Build something with results that will last? I was under the impression that G.T.M (previous to reading the 50 or so pages here(an ya i read em all) lol) Was although expensive, the "Right" way/place to get it built.

When it came to having the tranny rebuilt again... i did some research and found good reviews on Level 10, so i got the level10 "Bulletproof" build and have been very satisfied since.Level 10 is awesome and were fantastic to work with.
Now living in Az as well as being a CardHolder, You know im Smoking something Fantastic:happydance:,But is it too much to desire/wishfor an Engine Built by a company that is able & willing to impress and satisfy me in the same way?..LoL
Seriously though Level10 was very professional,They were on time reasonably priced and have been able to stand behind their product. I definitely Recommend them to anyone looking for a built tranny.
Now any recommendations for a place to have it built "right"?
if i can find it, i like the idea of having a fast as heaven g37 Vs a stock or slightly modded GTR...but if i don't go with gtm & can't find a suitable replacement builder then i'll just end up trading in for a GTR. ..but for now i'd still rather keep building the platform i have on hand.:)

NoLaKrewe 02-21-2015 09:50 PM

Quote:

Originally Posted by G37sTT (Post 3118829)
Well im Looking for Options?..Can anyone Recommend a Shop that can do it in a reasonable time? & Build something with results that will last? I was under the impression that G.T.M (previous to reading the 50 or so pages here(an ya i read em all) lol) Was although expensive, the "Right" way/place to get it built.

When it came to having the tranny rebuilt again... i did some research and found good reviews on Level 10, so i got the level10 "Bulletproof" build and have been very satisfied since.Level 10 is awesome and were fantastic to work with.
Now living in Az as well as being a CardHolder, You know im Smoking something Fantastic:happydance:,But is it too much to desire/wishfor an Engine Built by a company that is able & willing to impress and satisfy me in the same way?..LoL
Seriously though Level10 was very professional,They were on time reasonably priced and have been able to stand behind their product. I definitely Recommend them to anyone looking for a built tranny.
Now any recommendations for a place to have it built "right"?
if i can find it, i like the idea of having a fast as heaven g37 Vs a stock or slightly modded GTR...but if i don't go with gtm & can't find a suitable replacement builder then i'll just end up trading in for a GTR. ..but for now i'd still rather keep building the platform i have on hand.:)

Plenty of shops that will NOT steal your money and build your car. If you have the money someone will take it.

1LIFE 02-21-2015 10:39 PM

Dynosty can build you a "bulletproof" motor G37sTT

NoLaKrewe 02-21-2015 10:48 PM

Doesn't Z1 build motors or am I mistaking?

G37sTT 02-21-2015 11:23 PM

Yeah,i just actually got a wealth of knowledge,an will be giving Z1 a call on Monday.Thanks Ya'll.

COSMO 02-22-2015 08:23 AM

They are also some great shops in TX that specialize in vq motors...

jwick 02-22-2015 10:15 AM

Import Parts Pro in Spring Texas have been in the game a long time and have some pretty good built motor options. You could also go with JTran Motorsports and have you block built by racing legend and hall of famer Ron Bergenholtz.

Chuck33079 02-22-2015 10:17 AM

Look at IPP's threads here on the forum as well. They'll send you a turn-key build longblock for a very reasonable price.


All times are GMT -5. The time now is 05:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2