Look at this beautiful kit headed out! All black is in style lately! (the short blue hose does not go in the engine bay)

$575 shipped as shown (+$30 for the black Aeromotive), +$20 for the mini pressure gauge.

I love mine, I find the red on mine pops with the 40th theme.

http://img.photobucket.com/albums/v2...ps89xjuwoh.jpg

Only one small issue with mounting it here that I did not realize until I put my strut brace on, lol. But im cool with it.

Woops! Thanks for the note on that. I will be sure and instruct people to leave an inch or two above the regulator to make sure an allen key fits in for adjusting

Its going to be quite hard to get it lower with just the way you have to work to get the holes drilled (I drilled to help the self tapping screws bite). You could go lower if you had a dremel and a 45deg end on it to get it lower. Also be sure to make sure they are careful of the hard lines on the other side of that piece. I had to cut the screws down so they wouldn't hit them.

I got very lucky that the regulator didnt hit when I put it all back together, I mean I wont ever really have to touch it again anyways. And if I do it will be because of something I would have done with the brace off anyways.

Just pull the battery out and drill from the other side :)

Lol... Lets just go with I thought of that and chose the harder more obscene way to get things don't just because I wanted a challenge. :tup:

Holy crap the all black kit looks GOOD.

This might be off topic... Is there a more stealth way of installing a sending unit for a fuel pressure gauge?

Ya I've got options for that. I'll pm you this weekend

hey Phunk, can you email me instructions on this? and do I need this? LOL

PM'd you about this. Excited to have to sleep on the couch after I mention it to the wife!

Forgiveness is easier :tup:

Its going to be an expensive fuel journey, but it will make my car "safer". I need it and a retune to ensure the safety of my motor. I don't want my motor to pop after all of this work I did. Its cheaper than rebuilding the motor too.

Im practicing that speech for the wife right now lol.

I will PM you back shortly! Thanks!

Was running low on the S1 kit hardware, had to push through another quick batch to keep them in stock! (photo)

Should have to full detailed instructions completed soon. Working with a customer right now on getting good photos to use! Should make it easier for everyone I think.