CJM S1 RFS: Your 600hp Fuel System
 

The CJM S1 fuel system for the Nissan 370z is the result of over 3 years of testing the factory VHR fuel rails at horsepower levels exceeding 600hp. Immediately after the release of the vehicle, CJ Motorsports developed the first line of 370z fuel system upgrades, including return conversions, fuel rails, fuel pump kits, and plumbing systems, giving us the edge of more experience, more mileage, and more installs with the platform than anyone in the industry.


While it may be our entry level 370z fuel system, this product is a known performer. It is a refined version of a system we tested for over 40,000 miles and 3 years on our daily driven 2009 370z (exceeding 600hp with E85 fuel), and with dozens installed in its first year of release, it has quickly become our best-selling 370z product.

The S1 system is based on the stock fuel rails. The feed hose between the chassis pipe and the fuel rail inlet is upgraded to improve flow into the rails. The new feed line attaches to our billet CJM Multi-Fitting to supply the rail inlet tube. Leaving the Multi-Fitting is a fuel pressure relief hose which leads to an adjustable fuel pressure regulator mounting on the side of the battery compartment. Exiting the bottom of the regulator is a -6 return line all the way back to the tank, supplying the return fuel to the CJM Return Correction kit. This Return Correction is a vital hardware kit used to convert the fuel pump module to return fuel while maintaining proper function of the integrated venturi pumps.

Installed with adequate fuel injectors and an upgraded fuel pump, this system can fuel over 600hp to the wheels on a stock 11:1 compression turbocharged VHR.

This fuel system is tested and proven compatible with turbo systems from: AAM, Boosted Performance, Fast Intentions, Greddy, GTM, and VSR.

ORDERING LINK: CLICK HERE

INSTALLATION INSTRUCTIONS: CLICK HERE


Detailed Photos and Information:


Feed Line Kit: A billet aluminum quick-disconnect adapter for the stock feed pipe is employed (over less expensive plastic options) due the proximity of exhaust manifold heat. A -6AN hose leads from the QD adapter to the fuel rail inlet. Add the fire sleeve option to further protect this hose and reduce fuel temperatures. Hose shown above displays the CPE hose option.


CJM Multi-Fitting: Our Multi-Fitting provides a pair of -6 ports and a 1/8 NPT port to the fuel rail inlet flange. The fuel feed travels straight through for optimal flow. The NPT port adds a convenient location for a small pressure gauge (optional), or as a location for a pressure sensor for an electronic pressure gauge that you may mount in the vehicle's cabin. Includes stainless mounting hardware and viton o-ring.


Regulator & Rail Outlet Hose Kit: By regulating fuel pressure in the engine bay, after the many restrictions causing pressure drop, you are maximizing output of the fuel pump and providing its best effort to the rails and injectors. The rail outlet hose connects the output of the Multi-Fitting to the inlet side port of the pressure regulator. Choose from 3 high-quality regulators that we stock.


CJM Return Correction Kit: From our Level 1 fuel pump return hardware kit, and introduced by CJM in 2009, this product converts the factory 370z fuel sending unit to return fuel. This is what makes a return fuel system for the 370z possible. This proprietary kit eliminates the factory fuel pressure regulator while retaining the important in-tank venturi pumps.


Option Details:

Regulator Type: Select your preference from Aeromotive and Fuelab options.
Mini-Pressure Gauge: When not installing an in-cabin fuel pressure gauge, you will need this to set and monitor fuel pressure.
DEI Fire Sleeve: This quality insulation for -6 hoses is recommended for turbo and high-heat applications.
Fuel Pump Installation Kit: Required when installing an aftermarket fuel pump such as Walbro, Aeromotive, or AEM. Walbro 400 series pumps are not compatible with the S1 fuel system as they require you to remove the integrated filter and add an external. Many forced induction kits come with this hardware kit already. If you previously installed an upgraded fuel pump, than you will not need this option.

Hose Type Option:

PTFE Hoses: PTFE liner with SS over-braid and black PVC abrasion resistant coating to protect the vehicle and wiring harness from SS braid. This is some tough and durable stuff and will not permeate any fuel vapors. It is stiffer, making it a little more difficult to install. After it gets warm in use, it will begin to significantly relax to its new installed shape.
CPE Hose: Soft CPE liner with light SS mesh molded-in and a soft black Nylon over-braid. Extremely light and flexible. The hose ends are aluminum swivel style providing easier installation. Overall diameter is a little larger as the liner thickness is greater.
The fuel return line back to the tank is PTFE regardless of selection. It features a black PCV coating to protect your vehicle from abrasive SS braiding.


Frequently Asked Questions:

Q: Why convert to return fuel?
A: Converting your vehicle to return-fuel provides you with a method to regulate rail pressure after the pressure-drop across the fuel lines, thus allowing your fuel pump to work harder and increase fuel velocity through your plumbing. An added benefit to a return conversion generally includes a high-performance pressure regulator which offers adjustable pressure and a constant (rail-to-manifold) pressure differential by installing a vacuum reference line.

Q: Will I require a re-tune immediately after installation?
A: If you set the fuel pressure to stock, and do not connect the vacuum hose to the regulator, the system will behave like a stock fuel system and the tune will be mostly unaffected. If you were previously experiencing a dangerous pressure drop at the top end of your fuel system, the improved fuel system will eliminate that pressure drop which may cause your vehicle to run rich at full throttle. If you alter the fuel pressure setting from which your tune was created with, a re-tune will be required.

Q: Is this fuel system compatible with my forced induction kit?
A: All known turbo systems are compatible. Unlike some of our more extreme fuel system options for the 370z, the S1 system follows the factory fuel plumbing route so that it can be compatible with most forced induction kits. This system may not fit the Stillen SC kit, please see our S1-S system for this application.

Q: Will this fuel system work with my tune provided by my forced induction kit manufacturer?
A: It absolutely can. Your tune is dependent on a specific fuel pressure curve in the rails, but not a specific fuel system. The S1 fuel system is able to operate under both the factory (static) fuel pressure curve, or a 1:1 ratio curve that any return fuel system based tune is for. If you are unsure, contact us and we will instruct you on how to set your regulator to match your forced induction tune.

Q: What is required to convert to E85?
A: The S1 fuel system is 100% compatible with E85. Increased fuel demands of E85 may require larger fuel injectors and a larger fuel pump to successfully tune after converting.


Installed:

Will this work with your road race pump?

100% Compatible! They would be a great combination.

The RRP was designed after the original S0 fuel system.. so we were able to make sure that the RRP would not interfere with the components of the Return Correction Kit inside the fuel pump module.

Is this the setup with the return line before the injectors?

Yes our S0 and S1 systems are returning from the fuel rail inlet tube at the front side of the passenger valvecover, just before the fuel rails. Our original S0 system used to return from the damper ports on the rails... but it was just too tight of a fit and people didn't like installing it, so a year or two ago we switched it to this location.

Pricing Updated!

Just added a new hose type option for the 2 engine bay hoses. I have worked out pricing for them in PTFE like the long return line. Its actually slightly better stuff even though it is less expensive. It is just a little tougher to work with and requires a more serious crimping machine.

PTFE Hoses: PTFE liner with SS over-braid, and PVC protective coating to reduce/eliminate abrasion wear from the SS braid. This stuff is suitable for airplanes, battle tanks, aircraft carriers, dump trucks, or fuel systems. It is some seriously tough and durable stuff and will not permeate any fuel vapors. Downsides: Stiffer, not quite as pretty, no swivel ends.

CPE Hoses: Softer CPE liner with light SS mesh molded in, and soft black Nylon over-braid. Extremely light and flexible. The hose ends are swivel style so installation is a little easier. Overall diameter is a little larger as the liner thickness is greater. Downsides: A little more expensive, mostly due to the pretty swivel hose ends.

Both hose types are shown in the complete kit photo. The longer return line (shinier PVC coating) is the PTFE hose type. The 2 engine bay hoses in the photos are CPE type.

Thanks!

So if we already have the RRP, we could buy this kit and it would work together. Now what would be the process in adding another/bigger fuel pump to support more hp for turbocharged vehicles?

Phunk - what measurements would you need from me to make this work on a G? I assume the return lines would need 'x' number of inches added but the rest should be the same.

Correct, they are directly compatible products.

There are several ways to upgrade the RRP with larger pumps. It can be as easy as just putting a second 255 pump inside the RRP.

It would make sense if we spoke to coordinate a pump configuration and fuel system together to make sure they are a good match. The S1 fuel system would be great for something like a twin 255 RRP... but if you wanted to go big with something like a 255/485 combo, we would probably want to bypass the factory filter and get an external one in there with larger feed plumbing, like our S2 systems.

Correct, only the return line length would need to be adjusted.

I have a S2-SE fuel system that recently shipped to a G37 customer, and they are going to take a few measurements during the install so I can send them updated parts.

Depending on your timeline, we could work it out sooner if you wanted to proceed. The G37 fuel tank isnt as tall and that will free up an extra inch or two. Our return line has a little slack on it already... there is a chance it would already work. But if you had a few days of available downtime, I could send you the kit and then if you need a longer hose, I could have a new hose or an extension shipped to you same day.

I'm a little ways off from tackling this so if you are going to get update dimensions from this other guy, I be more than willing to hold off until we knew the proper lengths.

For sure. BTW if you get this system, you dont need the fuel pressure gauge kit! LOL. (The S1 fitting has a FP gauge port included).

off topic: the (first) Greddy sensor you ordered has made it to my distributor. I will have it early next week.

awesome, more parts to buy now... lol. pretty sweet stuff phunk, you are the fuel system master!

Sweet and I noticed you used the same location as the fp gauge. Once the Greedy sender comes in lets talk and we can work out what's the best solution for me at this time.

Ok. Ill be in contact with you in the next few months. I mentioned a motor build and my wife almost made me sleep on the couch lol. So the car is a touchy subject for a little while it seems.

Nice. Repped and added to wishlist :)

Just ordered mine!! Thanks again Charles..

Impressive stuff!

Very interested in this

Let me know if you have any questions or anything! I am currently out of town and have limited internet access but I will be in and out and partly available by phone/text.

I appreciate the order! Good chatting with you today.

Nothing but the best expected!!! Awesome products

Pm send :tiphat:

PMs replied!

I am back in town and starting to pack up orders. Apologies for the slow response guys, I left for a little vacation Tuesday night at 1am and just got back earlier today.

Ordered mine! Thanks you Charles :tiphat:

Thanks. Packing her up!

PTFE hoses for that option are finally on their way to me!

:happydance::excited:

Fuel system arrived just in time for my build. Thanks for everything Charles. :tiphat:

We have several of these systems out there in action now. Thank you to our customers!

Now proven to fit:
Greddy TT
Fast Intentions TT
Boosted Performance Single Turbo
VSR Single Turbo (let us know if ordering for this, needs longer hose)
GTM TT & SC.

Looking for a Stillen SC guinea pig! Contact me for details.

Installed by customers, CJM dealers and Z tuners, with gasoline, and with E85.... Nothing but positive reviews and tested and proven to support over 600rwhp.

Current pricing details:

$545 - Complete system, stealth all black, Fuelab Regulator, PTFE Hoses
$565 - Complete system, Aeromotive Red Regulator, PTFE Hoses
$575 - Complete system, stealth all black, Aeromotive black Regulator, PTFE Hoses

+$20 Mini Pressure Gauge
+$20 Soft Nylon over CPE hose with aluminum swivel fittings

Options to include fuel pump and installation kits. Option to include wiring harness upgrade.

All kits ship FREE in US, and discounted international.

Order yours HERE or PM me!

These kits are always in stock and available to ship. They even come with a free CJ Motorsports keychain! (while supplies last)


New Photos! After having a batch of the multi-fittings anodized black, and switching our PTFE hoses to use black aluminum hose ends, and with 2 black regulator options... we now have a really slick stealth all black appearance option if you prefer that theme.

http://shop.cj-motorsports.com/media/370zs1fitting3.jpg
Black Anodized Multi-Fitting

http://shop.cj-motorsports.com/media/regulators1.jpg

http://shop.cj-motorsports.com/media/regulators2.jpg
Regulator Options, always in stock.

http://shop.cj-motorsports.com/media/370zs1ptfe.jpg
The new black aluminum hose ends on the PTFE hose.

Look at this beautiful kit headed out! All black is in style lately! (the short blue hose does not go in the engine bay)

$575 shipped as shown (+$30 for the black Aeromotive), +$20 for the mini pressure gauge.

I love mine, I find the red on mine pops with the 40th theme.

http://img.photobucket.com/albums/v2...ps89xjuwoh.jpg

Only one small issue with mounting it here that I did not realize until I put my strut brace on, lol. But im cool with it.

Woops! Thanks for the note on that. I will be sure and instruct people to leave an inch or two above the regulator to make sure an allen key fits in for adjusting

Its going to be quite hard to get it lower with just the way you have to work to get the holes drilled (I drilled to help the self tapping screws bite). You could go lower if you had a dremel and a 45deg end on it to get it lower. Also be sure to make sure they are careful of the hard lines on the other side of that piece. I had to cut the screws down so they wouldn't hit them.

I got very lucky that the regulator didnt hit when I put it all back together, I mean I wont ever really have to touch it again anyways. And if I do it will be because of something I would have done with the brace off anyways.

Just pull the battery out and drill from the other side :)

Lol... Lets just go with I thought of that and chose the harder more obscene way to get things don't just because I wanted a challenge. :tup:

Holy crap the all black kit looks GOOD.

This might be off topic... Is there a more stealth way of installing a sending unit for a fuel pressure gauge?

Ya I've got options for that. I'll pm you this weekend

hey Phunk, can you email me instructions on this? and do I need this? LOL