Help trouble shoot my problem.

Tombonombona

Ok here are the basics, car is a 2012 with the 6MT and a GTM st2 SC. About a week ago it seemed like it was ever so slightly down on power and it got progressivly worse from there to the point of running really rich and barely able to hold an idle, to not running on all cylinders..... I had a friend plug in his professional code reader..

Things I have checked :
- Spark plugs have spark
- All vac lines are good
- Bov seems to be working
- Plumbing connections are all tight
- I reflashed it with a safe tune from J Tran ( seemed to help but it only fired for maybe one or two revolutions and now just cranks )
- Looked at cam sensors, they look good
- Fuel system looked good, pressured up nice and held it
- Air filter is clean
- We even tried helping it with a couple shots of carb cleaner right into the intake while cranking, nothing happened.

Codes being thrown :
- U1024
- Various wheel codes from aftermarket rims and no tpms
- I know this isn't a code, but even with engine turned off it showed that rpm was at 2800 ish.


Things I haven't been able to check yet :
- Crank sensor (can't find the damn thing)
- Spark plugs, no socket I have is thin enough walled to get them out


Any help would be greatly appreciated, I'm out of ideas.

__________________
Tom B.
Exotic Speed R2 Titan Catback-GTM Stage 2 Supercharger 522 whp on a mustang dyno
2004 Subaru STi *SOLD* *WRITTEN OFF*