Stillen SC preparations

jwick · 04-28-2014, 12:48 PM

Wasn't an attack. It's just how adamant we feel about their products.

We are all here to happily assist with your build. I've learned a great deal within this community and know you will as well. You'll find there are a good number of boosted VQs in the Houston area and all more than willing to assist.

Quote:

Originally Posted by Nismo6972

I got the Mishi part....on the first message
I AM doing the radiator
I AM doing the condenser
I WILL be looking for another Thermostat
Injectors will be at the top end of the spectrum.

Checking Frozenboost, or other coolers as we speak.

These forums are designed to get input from multiple sources, especially to AVOID issues like with Mishi...and the cooling...thanks for that, and if it seems redundant..welll...I like to hear different peoples opinions and experiences/input...
I am sure somewhere in the future, I too, will pass on this info from my experiences...

Nismo6972 · 04-28-2014, 01:29 PM

I appreciate it VERY much, and I am not too proud to ask for advice, maybe even the same question to numerous people.
Mishi has been discarded from my books...
I wouldn't have known without everyone's input.
One of the people I order from sells quite a few Mishi products...
Makes me leery of them now...But no probs, as I wont purchase them...

Thanks

Quote:

Originally Posted by jwick

Wasn't an attack. It's just how adamant we feel about their products.

We are all here to happily assist with your build. I've learned a great deal within this community and know you will as well. You'll find there are a good number of boosted VQs in the Houston area and all more than willing to assist.

Nismo6972 · 04-28-2014, 01:42 PM

What CC Injectors would be recommended? 850/1000?
Deutschwerks?

Quote:

Originally Posted by Nismo6972

I appreciate it VERY much, and I am not too proud to ask for advice, maybe even the same question to numerous people.
Mishi has been discarded from my books...
I wouldn't have known without everyone's input.
One of the people I order from sells quite a few Mishi products...
Makes me leery of them now...But no probs, as I wont purchase them...

Thanks

Chuck33079 · 04-28-2014, 01:45 PM

Quote:

Originally Posted by Nismo6972

What CC Injectors would be recommended? 850/1000?
Deutschwerks?

How much are you going to push the SC? If they give you 600s, upgrade them to 750s or so. Don't go too big if you aren't going to need it. If you're going to swap out all the pullies and impeller on the blower and really push it, then you may need to go to 850s or 1000s. If you're getting a Walbro 255 with the kit, see if they have the option to upgrade to the Aeromotive for a little additional headroom.

JWillis72 · 04-28-2014, 02:04 PM

Quote:

Originally Posted by Chuck33079

How much are you going to push the SC? If they give you 600s, upgrade them to 750s or so. Don't go too big if you aren't going to need it. If you're going to swap out all the pullies and impeller on the blower and really push it, then you may need to go to 850s or 1000s. If you're getting a Walbro 255 with the kit, see if they have the option to upgrade to the Aeromotive for a little additional headroom.

I believe they come with 750s and with the 8 lb pulley you will only run them about 80 percent. I asked Mark at Stillen about the 600s because I've seen that several times here and he told me they all come with 750s.

TKomodo · 05-09-2014, 03:05 PM

Quote:

Originally Posted by JWillis72

I believe they come with 750s and with the 8 lb pulley you will only run them about 80 percent. I asked Mark at Stillen about the 600s because I've seen that several times here and he told me they all come with 750s.

600cc injectors and 7lb pulley. Saw the movie, bought the shirt. There was a debate when I had my kit installed about the size of the injectors. Like you, I did my preliminary research and had bought a set of Spray it Racing 850cc injectors to use in my kit. Long story short, the shop convinced me that the injectors in the Stillen kit were GTR injectors, only to find out later that they were Deutsch 600cc. I'll be upgrading in the future.

I'd recommend buying Injector Dynamic 850cc injectors and upgrade the fuel pump. I have a 25 row oil cooler that is ceramic coated, no oil temp issues yet, but summer is not here. Everything else other than my AC condenser is ceramic coated too. Does it make a difference? I don't know.

Nismo6972 · 04-28-2014, 02:21 PM

Who is a good vendor for the CSF radiator locally? is it vehicle specific or any particular model?

Quote:

Originally Posted by jwick

Wasn't an attack. It's just how adamant we feel about their products.

We are all here to happily assist with your build. I've learned a great deal within this community and know you will as well. You'll find there are a good number of boosted VQs in the Houston area and all more than willing to assist.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Stillen Gen 3 Ultra Long Tube Dual Intake Kit Nissan 370Z	alright	Forced Induction	4	03-20-2013 02:38 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM
REPORT: General Motors in "intense" bankruptcy preparations	AK370Z	Other Vehicles	17	04-27-2009 07:57 PM